Info Command (info)

Source: pgBackRest Command Docs: info

The info command reports on one stanza or all stanzas. By default, text output summarizes backups for the requested stanzas. The text format can change in any release.

For machine-readable output, use --output=json. JSON includes much more information than text output. Its format stays stable unless a bug requires a change.

Use --detail-level=progress to show only progress and reduce execution time. This skips all checks except stanza availability.

Each stanza has a separate section. Use --stanza to show only one. The status field indicates stanza health: ok means pgBackRest operates normally. With multiple repositories, mixed means at least one repository has an unhealthy stanza; output then gives the status per repository. An unknown repository error uses the code other and includes full error details.

The wal archive min/max field shows the minimum and maximum archived WAL. With multiple repositories, it covers all repositories unless you set --repo. Archive retention policies or other causes can leave gaps in this range.

The backup/expire running and/or restore running messages appear beside status when those commands run on the host. Text output also shows progress per repository. JSON output includes a repo array.

Backups appear from oldest to newest. The oldest is always a full backup, with an F at the end of its label. The newest can be full, differential (label ends with D), or incremental (label ends with I).

The timestamp start/stop field shows when the backup ran. Use timestamp stop to choose a backup for Point-In-Time Recovery. See Point-In-Time Recovery for details.

The wal start/stop field shows the WAL range necessary for database consistency after a restore. The backup command checks that the archive contains this range before it completes.

The database size field shows the full, uncompressed database size. The database backup size field shows the database data actually backed up. These values match for full backups.

The repo field identifies the repository that contains the backup. The backup set size includes files in this backup and referenced backups needed for a restore. The backup size includes only files in this backup. These sizes match for full backups. When pgBackRest compression is enabled, repository sizes reflect compressed files.

The backup reference total summarizes other backups needed to restore this backup. Use --set for the complete reference list.

Command Options

Detail level Option (--detail-level)

Output detail level.

The following levels are supported:

• progress - Output only the current backup/expire progress. This level cannot be used with the --set option.
• full - Output full info.

default: full
example: --detail-level=progress

Output Option (--output)

Output format.

The following output types are supported:

• text - Human-readable summary of backup information.
• json - Exhaustive machine-readable backup information in JSON format.

default: text
example: --output=json

Set Option (--set)

Backup set to detail.

Details include all additional backups needed for a restore. They also list databases and OIDs, except template databases. Tablespace details include OIDs and default restore destinations. Symlink details show restore destinations when --link-all is specified.

example: --set=20150131-153358F_20150131-153401I

Type Option (--type)

Filter on backup type.

Filter the output using one of the following backup types:

• full - Output only full backups.
• diff - Output only differential backups.
• incr - Output only incremental backups.

example: --type=full

General Options

Allow Run as Root Option (--allow-root)

Allow the command to run as the root user.

By default, only restore can run as root because it manages file ownership. Other commands can create root-owned files, for example in the repository. The PostgreSQL user cannot access these files, which causes later commands to fail.

Enable this option to run another command as root. Preferably, run pgBackRest as the user that owns the repository and PostgreSQL cluster.

default: n
example: --allow-root

Buffer Size Option (--buffer-size)

Buffer size for I/O operations.

Set the buffer size for copy, compression, encryption, and other operations. Options determine the number of buffers. Each operation can also use more memory. For example, gz compression can use an additional 256KiB.

Allowed values are 16KiB, 32KiB, 64KiB, 128KiB, 256KiB, 512KiB, 1MiB, 2MiB, 4MiB, 8MiB, and 16MiB.

default: 1MiB
example: --buffer-size=2MiB

SSH Client Command Option (--cmd-ssh)

SSH client command.

Use this option to select a different SSH client or when the ssh command is not in $PATH.

default: ssh
example: --cmd-ssh=/usr/bin/ssh

Network Compress Level Option (--compress-level-network)

Network compression level.

Set the network compression level when compress-type=none and the command runs on a host other than the repository host. Compression reduces network traffic. When compress-type is not none, pgBackRest ignores compress-level-network and uses compress-level. This prevents compression of the same file twice.

default: 1
allowed: [-5, 12]
example: --compress-level-network=1

Config Option (--config)

pgBackRest configuration file.

Use this option to select a configuration file other than the default.

default: CFGOPTDEF_CONFIG_PATH "/" PROJECT_CONFIG_FILE
example: --config=/conf/pgbackrest/pgbackrest.conf

Config Include Path Option (--config-include-path)

Path to additional pgBackRest configuration files.

pgBackRest combines files with the .conf extension in this location with its configuration file. The result is one configuration file.

default: CFGOPTDEF_CONFIG_PATH "/" PROJECT_CONFIG_INCLUDE_PATH
example: --config-include-path=/conf/pgbackrest/conf.d

Config Path Option (--config-path)

Base path of pgBackRest configuration files.

Set the default base path for --config and --config-include-path. Explicit command-line values for these options override this setting.

For example, specify only --config-path=/conf/pgbackrest to set the --config default to /conf/pgbackrest/pgbackrest.conf. This also sets the --config-include-path default to /conf/pgbackrest/conf.d.

default: CFGOPTDEF_CONFIG_PATH
example: --config-path=/conf/pgbackrest

I/O Timeout Option (--io-timeout)

I/O timeout.

Set the connection and read/write timeout in seconds.

The complete read/write operation can take longer than this timeout. However, it must make some progress before the timeout, even if only one byte.

default: 1m
allowed: [100ms, 1h]
example: --io-timeout=120

Lock Path Option (--lock-path)

Path where lock files are stored.

pgBackRest creates lock files in this path to prevent conflicting operations from running at the same time.

default: /tmp/pgbackrest
example: --lock-path=/backup/db/lock

Set Process Priority Option (--priority)

Set process priority.

Set the process priority, or niceness, used by the kernel scheduler. Positive values decrease priority. Negative values increase priority. Processes usually lack permission to increase their priority.

allowed: [-20, 19]
example: --priority=19

Protocol Timeout Option (--protocol-timeout)

Protocol timeout.

Set how many seconds a local or remote process waits for a new protocol message. This prevents an indefinite wait.

NOTE: The protocol-timeout option must be greater than the db-timeout option.

default: 31m
allowed: [100ms, 7d]
example: --protocol-timeout=630

Keep Alive Option (--sck-keep-alive)

Keep-alive enable.

Enables keep-alive messages on socket connections.

default: y
example: --no-sck-keep-alive

Stanza Option (--stanza)

Defines the stanza.

A stanza contains the configuration for a PostgreSQL database cluster. It defines the cluster location, backup method, archive options, and other settings. Most database servers have one PostgreSQL cluster and one stanza. A backup server has a stanza for each cluster that needs a backup.

Choose a stanza name that describes the databases in the cluster. The primary and all replicas use the same stanza name. A functional name, such as app or dw, is preferable to a local cluster name, such as main or prod.

example: --stanza=main

Keep Alive Count Option (--tcp-keep-alive-count)

Keep-alive count.

Set how many TCP keep-alive messages can be lost before the connection is considered dead.

This option is available on systems that support the TCP_KEEPCNT socket option.

allowed: [1, 32]
example: --tcp-keep-alive-count=3

Keep Alive Idle Option (--tcp-keep-alive-idle)

Keep-alive idle time.

Set how many seconds of network inactivity must pass before the operating system sends a TCP keep-alive message.

This option is available on systems that support the TCP_KEEPIDLE socket option.

allowed: [1, 3600]
example: --tcp-keep-alive-idle=60

Keep Alive Interval Option (--tcp-keep-alive-interval)

Keep-alive interval time.

Set how many seconds to wait before retransmitting a TCP keep-alive message that has no acknowledgement.

This option is available on systems that support the TCP_KEEPINTVL socket option.

allowed: [1, 900]
example: --tcp-keep-alive-interval=30

TLSv1.2 cipher suites Option (--tls-cipher-12)

Allowed TLSv1.2 cipher suites.

All TLS connections between the pgBackRest client and server use encryption. Connections to object stores, such as S3, also use encryption by default.

NOTE: The absolute minimum security level for any transport connection is TLSv1.2.

Change the accepted cipher suites if necessary. The example is suitable unless you have specific security requirements. By default, this option is unset and the underlying OpenSSL library default applies.

example: --tls-cipher-12=HIGH:MEDIUM:+3DES:!aNULL

TLSv1.3 cipher suites Option (--tls-cipher-13)

Allowed TLSv1.3 cipher suites.

All TLS connections between the pgBackRest client and server use encryption. Connections to object stores, such as S3, also use encryption by default.

NOTE: The absolute minimum security level for any transport connection is TLSv1.2.

Change the accepted cipher suites if necessary. By default, this option is unset and the underlying OpenSSL library default applies.

example: --tls-cipher-13=TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256

Log Options

Console Log Level Option (--log-level-console)

Level for console logging.

The following log levels are supported:

• off - No logging at all (not recommended)
• error - Log only errors
• warn - Log warnings and errors
• info - Log info, warnings, and errors
• detail - Log detail, info, warnings, and errors
• debug - Log debug, detail, info, warnings, and errors
• trace - Log trace (very verbose debugging), debug, info, warnings, and errors

default: warn
example: --log-level-console=error

File Log Level Option (--log-level-file)

Level for file logging.

The following log levels are supported:

• off - No logging at all (not recommended)
• error - Log only errors
• warn - Log warnings and errors
• info - Log info, warnings, and errors
• detail - Log detail, info, warnings, and errors
• debug - Log debug, detail, info, warnings, and errors
• trace - Log trace (very verbose debugging), debug, info, warnings, and errors

default: info
example: --log-level-file=debug

Std Error Log Level Option (--log-level-stderr)

Level for stderr logging.

Select the log levels that write to stderr instead of stdout, which log-level-console controls. Output to stderr excludes the timestamp and process.

The following log levels are supported:

• off - No logging at all (not recommended)
• error - Log only errors
• warn - Log warnings and errors
• info - Log info, warnings, and errors
• detail - Log detail, info, warnings, and errors
• debug - Log debug, detail, info, warnings, and errors
• trace - Log trace (very verbose debugging), debug, info, warnings, and errors

default: off
example: --log-level-stderr=error

Log Path Option (--log-path)

Path where log files are stored.

pgBackRest stores log files in this path. If log-level-file=off, no log path is necessary.

default: /var/log/pgbackrest
example: --log-path=/backup/db/log

Log Subprocesses Option (--log-subprocess)

Enable logging in subprocesses.

Enable file logging for subprocesses created by this process. Use the level specified by log-level-file.

default: n
example: --log-subprocess

Log Timestamp Option (--log-timestamp)

Enable timestamp in logging.

Include timestamps in console and file logs. Disable this option for special uses, such as documentation generation.

default: y
example: --no-log-timestamp

Repository Options

Set Repository Option (--repo)

Set repository.

Set the repository for a command to operate on.

For example, select a repository for a restore instead of letting pgBackRest choose one.

allowed: [1, 256]
example: --repo=1

Azure Repository Container Option (--repo-azure-container)

Azure repository container.

Azure container used to store the repository.

Set repo-path=/ to store the repository in the container root. Usually, specify a prefix such as /repo. The container can then also store logs and other Azure-generated content.

example: --repo1-azure-container=pg-backup

Azure Repository Key Type Option (--repo-azure-key-type)

Azure repository key type.

The following types are supported for authorization:

• shared - Shared key
• sas - Shared access signature
• auto - Automatically authorize using Azure managed identities

default: shared
example: --repo1-azure-key-type=sas

Azure Repository URI Style Option (--repo-azure-uri-style)

Azure URI Style.

The following URI styles are supported:

• host - Connect to account.endpoint host.
• path - Connect to endpoint host and prepend account to URIs.

default: host
example: --repo1-azure-uri-style=path

Repository Cipher Type Option (--repo-cipher-type)

Cipher used to encrypt the repository.

The following cipher types are supported:

• none - The repository is not encrypted
• aes-256-cbc - Advanced Encryption Standard with 256 bit key length

pgBackRest always encrypts data on the client, even when the repository type, such as S3, supports encryption.

default: none
example: --repo1-cipher-type=aes-256-cbc

GCS Repository Bucket Option (--repo-gcs-bucket)

GCS repository bucket.

GCS bucket used to store the repository.

Set repo-path=/ to store the repository in the bucket root. Usually, specify a prefix such as /repo. The bucket can then also store logs and other GCS-generated content.

example: --repo1-gcs-bucket=/pg-backup

GCS Repository Endpoint Option (--repo-gcs-endpoint)

GCS repository endpoint.

Set the endpoint for the storage service connection. You can select a local GCS server or another endpoint.

default: storage.googleapis.com
example: --repo1-gcs-endpoint=localhost

GCS Repository Key Type Option (--repo-gcs-key-type)

GCS repository key type.

The following types are supported for authorization:

• auto - Authorize using the instance service account.
• service - Service account from locally stored key.
• token - For local testing, e.g. fakegcs.

When repo-gcs-key-type=service, pgBackRest reloads credentials when it renews the authentication token.

default: service
example: --repo1-gcs-key-type=auto

GCS Repository Project ID Option (--repo-gcs-user-project)

GCS project ID.

GCS project ID used to determine request billing.

example: --repo1-gcs-user-project=my-project

Repository Host Option (--repo-host)

Repository host when operating remotely.

This setting is not necessary for backups and archives on a locally mounted filesystem.

example: --repo1-host=repo1.domain.com

Deprecated Name: backup-host

Repository Host Certificate Authority File Option (--repo-host-ca-file)

Repository host certificate authority file.

Use a CA file other than the system default for connecting to the repository host.

example: --repo1-host-ca-file=/etc/pki/tls/certs/ca-bundle.crt

Repository Host Certificate Authority Path Option (--repo-host-ca-path)

Repository host certificate authority path.

Use a CA path other than the system default for connecting to the repository host.

example: --repo1-host-ca-path=/etc/pki/tls/certs

Repository Host Certificate File Option (--repo-host-cert-file)

Repository host certificate file.

pgBackRest sends this certificate to the repository host to prove the client identity.

example: --repo1-host-cert-file=/path/to/client.crt

Repository Host Command Option (--repo-host-cmd)

Repository host pgBackRest command.

Set this option only when the pgBackRest command path differs between the local and repository hosts. Otherwise, the repository host uses the local command path.

default: [path of executed pgbackrest binary]
example: --repo1-host-cmd=/usr/lib/backrest/bin/pgbackrest

Deprecated Name: backup-cmd

Repository Host Configuration Option (--repo-host-config)

pgBackRest repository host configuration file.

Set the repository host configuration file location. This is necessary only when it differs from the local configuration file location.

default: CFGOPTDEF_CONFIG_PATH "/" PROJECT_CONFIG_FILE
example: --repo1-host-config=/conf/pgbackrest/pgbackrest.conf

Deprecated Name: backup-config

Repository Host Configuration Include Path Option (--repo-host-config-include-path)

pgBackRest repository host configuration include path.

Set the repository host configuration include path. This is necessary only when it differs from the local configuration include path.

default: CFGOPTDEF_CONFIG_PATH "/" PROJECT_CONFIG_INCLUDE_PATH
example: --repo1-host-config-include-path=/conf/pgbackrest/conf.d

Repository Host Configuration Path Option (--repo-host-config-path)

pgBackRest repository host configuration path.

Set the repository host configuration path. This is necessary only when it differs from the local configuration path.

default: CFGOPTDEF_CONFIG_PATH
example: --repo1-host-config-path=/conf/pgbackrest

Repository Host Key File Option (--repo-host-key-file)

Repository host key file.

This key proves that the certificate owner sent the client certificate.

example: --repo1-host-key-file=/path/to/client.key

Repository Host Port Option (--repo-host-port)

Repository host port when repo-host is set.

Use this option to specify a non-default port for the repository host protocol.

NOTE: When repo-host-type=ssh, repo-host-port has no default. The command specified by cmd-ssh supplies its configured port.

default (depending on repo-host-type):
    tls - 8432

allowed: [0, 65535]
example: --repo1-host-port=25

Deprecated Name: backup-ssh-port

Repository Host Protocol Type Option (--repo-host-type)

Repository host protocol type.

The following protocol types are supported:

• ssh - Secure Shell.
• tls - pgBackRest TLS server.

default: ssh
example: --repo1-host-type=tls

Repository Host User Option (--repo-host-user)

Repository host user when repo-host is set.

Set the user for repository host operations. Prefer a separate user, such as pgbackrest, to the postgres user. If PostgreSQL runs on the repository host, you can add postgres to the pgbackrest group. This gives it read access to the repository without permission to damage its contents accidentally.

default: pgbackrest
example: --repo1-host-user=repo-user

Deprecated Name: backup-user

Repository Path Option (--repo-path)

Path where backups and archive are stored.

The repository is where pgBackRest stores backups and archives WAL segments.

To estimate repository space, take some backups. Record the sizes of full, incremental, and differential backups (full/incr/diff). Measure how much WAL the database generates each day. These measurements give an approximate space requirement. Requirements will probably change as the database changes.

default: /var/lib/pgbackrest
example: --repo1-path=/backup/db/backrest

S3 Repository Bucket Option (--repo-s3-bucket)

S3 repository bucket.

S3 bucket used to store the repository.

Set repo-path=/ to store the repository in the bucket root. Usually, specify a prefix such as /repo. The bucket can then also store logs and other AWS-generated content.

example: --repo1-s3-bucket=pg-backup

S3 Repository Endpoint Option (--repo-s3-endpoint)

S3 repository endpoint.

The AWS endpoint should be valid for the selected region.

For custom/test configurations the repo-storage-ca-file, repo-storage-ca-path, repo-storage-host, repo-storage-port, and repo-storage-verify-tls options may be useful.

example: --repo1-s3-endpoint=s3.amazonaws.com

S3 Repository Key Type Option (--repo-s3-key-type)

S3 repository key type.

The following types are supported:

• shared - Shared keys
• auto - Automatically retrieve temporary credentials
• web-id - Automatically retrieve web identity credentials
• pod-id - Automatically retrieve EKS pod identity credentials
• process - Retrieve credentials by executing a process

default: shared
example: --repo1-s3-key-type=auto

S3 Repository KMS Key ID Option (--repo-s3-kms-key-id)

S3 repository KMS key.

Enables S3 server-side encryption using the specified AWS key management service key.

example: --repo1-s3-kms-key-id=bceb4f13-6939-4be3-910d-df54dee817b7

S3 Authentication Process Command Option (--repo-s3-process-cmd)

S3 authentication process command.

Set the command and optional arguments that retrieve temporary S3 credentials. The first list entry is the command. The remaining entries are its parameters.

The process must output JSON with AccessKeyId, SecretAccessKey, SessionToken, and Expiration fields. pgBackRest refreshes credentials automatically before they expire. See Process Credential Provider for the format.

example: --repo1-s3-process-cmd=/usr/local/bin/get-credentials --repo1-s3-process-cmd=--role --repo1-s3-process-cmd=my-role

S3 Repository Region Option (--repo-s3-region)

S3 repository region.

The AWS region where the bucket was created.

example: --repo1-s3-region=us-east-1

S3 Repository Requestor Pays Option (--repo-s3-requester-pays)

S3 repository requester pays.

Enables S3 requester pays.

default: n
example: --no-repo1-s3-requester-pays

S3 Repository Role Option (--repo-s3-role)

S3 repository role.

When repo-s3-key-type=auto, set the AWS role name used to retrieve temporary credentials. Use the name, not the full ARN.

example: --repo1-s3-role=authrole

S3 Repository Service Option (--repo-s3-service)

S3 signing service.

Set the signing service for SigV4 authentication. The default is s3 for standard S3 endpoints. For an S3 Outposts endpoint, use s3-outposts.

default: s3
example: --repo1-s3-service=s3-outposts

S3 Repository STS Endpoint Option (--repo-s3-sts-host)

S3 repository STS endpoint.

When repo-s3-key-type=web-id, this endpoint retrieves temporary credentials. To use regional STS, select a regional endpoint, such as sts.us-east-1.amazonaws.com. Regional STS might be necessary for GovCloud or China regions, or to reduce latency.

default: sts.amazonaws.com
example: --repo1-s3-sts-host=sts.us-east-1.amazonaws.com

S3 Repository URI Style Option (--repo-s3-uri-style)

S3 URI Style.

The following URI styles are supported:

• host - Connect to bucket.endpoint host.
• path - Connect to endpoint host and prepend bucket to URIs.

default: host
example: --repo1-s3-uri-style=path

SFTP Repository Host Option (--repo-sftp-host)

SFTP repository host.

The SFTP host containing the repository.

example: --repo1-sftp-host=sftprepo.domain

SFTP Repository Host Fingerprint Option (--repo-sftp-host-fingerprint)

SFTP repository host fingerprint.

Generate the SFTP host fingerprint with the hash type specified by repo-sftp-host-key-hash-type. Use awk '{print $2}' ssh_host_xxx_key.pub | base64 -d | (md5sum or sha1sum) -b. SSH host keys are usually in /etc/ssh.

example: --repo1-sftp-host-fingerprint=f84e172dfead7aeeeae6c1fdfb5aa8cf

SFTP Host Key Check Type Option (--repo-sftp-host-key-check-type)

SFTP host key check type.

The following SFTP host key check types are supported:

• strict - pgBackRest never adds host keys to ~/.ssh/known_hosts automatically. It refuses connections when a host key changes or is absent from the known hosts files. Add each new host manually.
• accept-new - pgBackRest automatically adds new host keys to the user’s known hosts file. It refuses connections when a host key changes.
• fingerprint - pgBackRest compares the host key with the repo-sftp-host-fingerprint value.
• none - pgBackRest does not check host keys.

default: strict
example: --repo1-sftp-host-key-check-type=accept-new

SFTP Repository Host Key Hash Type Option (--repo-sftp-host-key-hash-type)

SFTP repository host key hash type.

Set the hash type used to calculate the remote host key digest at SSH startup. Newer libssh2 versions support sha256 as well as md5 and sha1.

example: --repo1-sftp-host-key-hash-type=sha256

SFTP Repository Host Port Option (--repo-sftp-host-port)

SFTP repository host port.

SFTP repository host port.

default: 22
allowed: [1, 65535]
example: --repo1-sftp-host-port=22

SFTP Repository Host User Option (--repo-sftp-host-user)

SFTP repository host user.

User on the host used to store the repository.

example: --repo1-sftp-host-user=pg-backup

SFTP Known Hosts File Option (--repo-sftp-known-host)

SFTP known hosts file.

Set a known hosts file to check during SFTP authentication. By default, pgBackRest searches ~/.ssh/known_hosts, ~/.ssh/known_hosts2, /etc/ssh/ssh_known_hosts, and /etc/ssh/ssh_known_hosts2. If you configure file paths, it searches those files. Use absolute paths or paths that start with a tilde. Repeat repo-sftp-known-host to specify multiple files. To check known hosts files, do not set repo-sftp-host-fingerprint.

See also the repo-sftp-host-check-type option.

example: --repo1-sftp-known-host=/home/postgres/.ssh/known_hosts

SFTP Repository Private Key File Option (--repo-sftp-private-key-file)

SFTP private key file.

SFTP private key file used for authentication.

example: --repo1-sftp-private-key-file=~/.ssh/id_ed25519

SFTP Repository Public Key File Option (--repo-sftp-public-key-file)

SFTP public key file.

Set the SFTP public key file for authentication. This file is optional for builds that use OpenSSL. Other builds require it.

example: --repo1-sftp-public-key-file=~/.ssh/id_ed25519.pub

Repository Storage CA File Option (--repo-storage-ca-file)

Repository storage CA file.

Use a CA file other than the system default for storage (e.g. S3, Azure) certificates.

example: --repo1-storage-ca-file=/etc/pki/tls/certs/ca-bundle.crt

Deprecated Names: repo-azure-ca-file, repo-s3-ca-file

Repository Storage TLS CA Path Option (--repo-storage-ca-path)

Repository storage CA path.

Use a CA path other than the system default for storage (e.g. S3, Azure) certificates.

example: --repo1-storage-ca-path=/etc/pki/tls/certs

Deprecated Names: repo-azure-ca-path, repo-s3-ca-path

Repository Storage Host Option (--repo-storage-host)

Repository storage host.

Connect to a host other than the storage (e.g. S3, Azure) endpoint. This is typically used for testing.

example: --repo1-storage-host=127.0.0.1

Deprecated Names: repo-azure-host, repo-s3-host

Repository Storage Port Option (--repo-storage-port)

Repository storage port.

Port to use when connecting to the storage (e.g. S3, Azure) endpoint (or host if specified).

default: 443
allowed: [1, 65535]
example: --repo1-storage-port=9000

Deprecated Names: repo-azure-port, repo-s3-port

Repository Storage Tag Option (--repo-storage-tag)

Repository storage tag(s).

For an object store repository, such as S3, specify the tags to add to objects. Repeat this option to add multiple tags.

pgBackRest cannot change these tags. Before you run stanza-create, set them correctly to give the entire repository uniform tags.

example: --repo1-storage-tag=key1=value1

Repository Storage Upload Chunk Size Option (--repo-storage-upload-chunk-size)

Repository storage upload chunk size.

Object stores, such as S3, support uploads in chunks for files too large to fit in memory. For smaller files, chunks also reduce the memory used for uploads.

Larger chunks usually improve performance because they reduce upload requests. More files can fit in a single request without division into chunks. However, larger chunks use more memory. Each process needs a chunk buffer, so a larger process-max value also increases total memory use.

Valid chunk sizes depend on the storage type and platform. For example, AWS S3 requires a minimum chunk size of 5MiB. To find minimum and maximum values, search for the term that matches your storage type. Use “part size” for AWS S3, “chunk size” for GCS, and “block size” for Azure.

By default, PostgreSQL creates files no larger than 1GiB. For larger files, pgBackRest increases the chunk size in increments, up to the allowed maximum, to complete the upload.

default (depending on repo-type):
    azure - 4MiB
    gcs - 4MiB
    s3 - 5MiB

allow range (depending on repo-type):
    azure - [4MiB, 1GiB]
    gcs - [4MiB, 1GiB]
    s3 - [5MiB, 1GiB]

example: --repo1-storage-upload-chunk-size=16MiB

Repository Storage Certificate Verify Option (--repo-storage-verify-tls)

Repository storage certificate verify.

Enable or disable verification of the storage server TLS certificate, for example for S3 or Azure. Disable verification only for testing or other cases that use a self-signed certificate.

default: y
example: --no-repo1-storage-verify-tls

Deprecated Names: repo-azure-verify-tls, repo-s3-verify-ssl, repo-s3-verify-tls

Target Time for Repository Option (--repo-target-time)

Target time for repository.

Set the point in time at which commands read a repository on versioned storage. This lets you recover data deleted or corrupted by user error or malware.

S3, GCS, and Azure support versioned storage, but usually disable it by default. In addition to versioning, consider S3 object locking or GCS and Azure soft delete.

When you specify repo-target-time, you must also specify repo. Some repository types probably will not support versioning. Recovery usually targets one repository.

Storage timestamps must be <= the specified timestamp. pgBackRest truncates milliseconds from the specified timestamp.

example: --repo-target-time=2024-08-08 12:12:12+00

Repository Type Option (--repo-type)

Type of storage used for the repository.

The following repository types are supported:

• azure - Azure Blob Storage Service
• cifs - Like posix, but disables links and directory fsyncs
• gcs - Google Cloud Storage
• posix - Posix-compliant file systems
• s3 - AWS Simple Storage Service
• sftp - Secure File Transfer Protocol

For an NFS mount used as a posix repository, follow the PostgreSQL filesystem rules. See Creating a Database Cluster - File Systems.

default: posix
example: --repo1-type=cifs