Parameters

Pigsty has 280+ parameters to describe every aspet of the environment & various modules

Module:

PIGSTY

Categories:

There are 280+ parameters in Pigsty describing all aspect of the deployment.

ID	Name	Module	Section	Type	Level	Comment
101	`version`	`INFRA`	`META`	string	G	pigsty version string
102	`admin_ip`	`INFRA`	`META`	ip	G	admin node ip address
103	`region`	`INFRA`	`META`	enum	G	upstream mirror region: default,china,europe
104	`proxy_env`	`INFRA`	`META`	dict	G	global proxy env when downloading packages
105	`ca_method`	`INFRA`	`CA`	enum	G	create,recreate,copy, create by default
106	`ca_cn`	`INFRA`	`CA`	string	G	ca common name, fixed as pigsty-ca
107	`cert_validity`	`INFRA`	`CA`	interval	G	cert validity, 20 years by default
108	`infra_seq`	`INFRA`	`INFRA_ID`	int	I	infra node identity, REQUIRED
109	`infra_portal`	`INFRA`	`INFRA_ID`	dict	G	infra services exposed via portal
110	`repo_enabled`	`INFRA`	`REPO`	bool	G/I	create a yum repo on this infra node?
111	`repo_home`	`INFRA`	`REPO`	path	G	repo home dir, `/www` by default
112	`repo_name`	`INFRA`	`REPO`	string	G	repo name, pigsty by default
113	`repo_endpoint`	`INFRA`	`REPO`	url	G	access point to this repo by domain or ip:port
114	`repo_remove`	`INFRA`	`REPO`	bool	G/A	remove existing upstream repo
115	`repo_modules`	`INFRA`	`REPO`	string	G/A	which repo modules are installed in repo_upstream
116	`repo_upstream`	`INFRA`	`REPO`	upstream[]	G	where to download upstream packages
117	`repo_packages`	`INFRA`	`REPO`	string[]	G	which packages to be included
118	`repo_url_packages`	`INFRA`	`REPO`	string[]	G	extra packages from url
120	`infra_packages`	`INFRA`	`INFRA_PACKAGE`	string[]	G	packages to be installed on infra nodes
121	`infra_packages_pip`	`INFRA`	`INFRA_PACKAGE`	string	G	pip installed packages for infra nodes
130	`nginx_enabled`	`INFRA`	`NGINX`	bool	G/I	enable nginx on this infra node?
131	`nginx_exporter_enabled`	`INFRA`	`NGINX`	bool	G/I	enable nginx_exporter on this infra node?
132	`nginx_sslmode`	`INFRA`	`NGINX`	enum	G	nginx ssl mode? disable,enable,enforce
133	`nginx_home`	`INFRA`	`NGINX`	path	G	nginx content dir, `/www` by default
134	`nginx_port`	`INFRA`	`NGINX`	port	G	nginx listen port, 80 by default
135	`nginx_ssl_port`	`INFRA`	`NGINX`	port	G	nginx ssl listen port, 443 by default
136	`nginx_navbar`	`INFRA`	`NGINX`	index[]	G	nginx index page navigation links
140	`dns_enabled`	`INFRA`	`DNS`	bool	G/I	setup dnsmasq on this infra node?
141	`dns_port`	`INFRA`	`DNS`	port	G	dns server listen port, 53 by default
142	`dns_records`	`INFRA`	`DNS`	string[]	G	dynamic dns records resolved by dnsmasq
150	`prometheus_enabled`	`INFRA`	`PROMETHEUS`	bool	G/I	enable prometheus on this infra node?
151	`prometheus_clean`	`INFRA`	`PROMETHEUS`	bool	G/A	clean prometheus data during init?
152	`prometheus_data`	`INFRA`	`PROMETHEUS`	path	G	prometheus data dir, `/data/prometheus` by default
153	`prometheus_sd_interval`	`INFRA`	`PROMETHEUS`	interval	G	prometheus target refresh interval, 5s by default
154	`prometheus_scrape_interval`	`INFRA`	`PROMETHEUS`	interval	G	prometheus scrape & eval interval, 10s by default
155	`prometheus_scrape_timeout`	`INFRA`	`PROMETHEUS`	interval	G	prometheus global scrape timeout, 8s by default
156	`prometheus_options`	`INFRA`	`PROMETHEUS`	arg	G	prometheus extra server options
157	`pushgateway_enabled`	`INFRA`	`PROMETHEUS`	bool	G/I	setup pushgateway on this infra node?
158	`pushgateway_options`	`INFRA`	`PROMETHEUS`	arg	G	pushgateway extra server options
159	`blackbox_enabled`	`INFRA`	`PROMETHEUS`	bool	G/I	setup blackbox_exporter on this infra node?
160	`blackbox_options`	`INFRA`	`PROMETHEUS`	arg	G	blackbox_exporter extra server options
161	`alertmanager_enabled`	`INFRA`	`PROMETHEUS`	bool	G/I	setup alertmanager on this infra node?
162	`alertmanager_options`	`INFRA`	`PROMETHEUS`	arg	G	alertmanager extra server options
163	`exporter_metrics_path`	`INFRA`	`PROMETHEUS`	path	G	exporter metric path, `/metrics` by default
164	`exporter_install`	`INFRA`	`PROMETHEUS`	enum	G	how to install exporter? none,yum,binary
165	`exporter_repo_url`	`INFRA`	`PROMETHEUS`	url	G	exporter repo file url if install exporter via yum
170	`grafana_enabled`	`INFRA`	`GRAFANA`	bool	G/I	enable grafana on this infra node?
171	`grafana_clean`	`INFRA`	`GRAFANA`	bool	G/A	clean grafana data during init?
172	`grafana_admin_username`	`INFRA`	`GRAFANA`	username	G	grafana admin username, `admin` by default
173	`grafana_admin_password`	`INFRA`	`GRAFANA`	password	G	grafana admin password, `pigsty` by default
174	`grafana_plugin_cache`	`INFRA`	`GRAFANA`	path	G	path to grafana plugins cache tarball
175	`grafana_plugin_list`	`INFRA`	`GRAFANA`	string[]	G	grafana plugins to be downloaded with grafana-cli
176	`loki_enabled`	`INFRA`	`LOKI`	bool	G/I	enable loki on this infra node?
177	`loki_clean`	`INFRA`	`LOKI`	bool	G/A	whether remove existing loki data?
178	`loki_data`	`INFRA`	`LOKI`	path	G	loki data dir, `/data/loki` by default
179	`loki_retention`	`INFRA`	`LOKI`	interval	G	loki log retention period, 15d by default
201	`nodename`	`NODE`	`NODE_ID`	string	I	node instance identity, use hostname if missing, optional
202	`node_cluster`	`NODE`	`NODE_ID`	string	C	node cluster identity, use ’nodes’ if missing, optional
203	`nodename_overwrite`	`NODE`	`NODE_ID`	bool	C	overwrite node’s hostname with nodename?
204	`nodename_exchange`	`NODE`	`NODE_ID`	bool	C	exchange nodename among play hosts?
205	`node_id_from_pg`	`NODE`	`NODE_ID`	bool	C	use postgres identity as node identity if applicable?
210	`node_write_etc_hosts`	`NODE`	`NODE_DNS`	bool	G/C/I	modify `/etc/hosts` on target node?
211	`node_default_etc_hosts`	`NODE`	`NODE_DNS`	string[]	G	static dns records in `/etc/hosts`
212	`node_etc_hosts`	`NODE`	`NODE_DNS`	string[]	C	extra static dns records in `/etc/hosts`
213	`node_dns_method`	`NODE`	`NODE_DNS`	enum	C	how to handle dns servers: add,none,overwrite
214	`node_dns_servers`	`NODE`	`NODE_DNS`	string[]	C	dynamic nameserver in `/etc/resolv.conf`
215	`node_dns_options`	`NODE`	`NODE_DNS`	string[]	C	dns resolv options in `/etc/resolv.conf`
220	`node_repo_modules`	`NODE`	`NODE_PACKAGE`	string	C	upstream repo to be added on node, local by default
221	`node_repo_remove`	`NODE`	`NODE_PACKAGE`	bool	C	remove existing repo on node?
223	`node_packages`	`NODE`	`NODE_PACKAGE`	string[]	C	packages to be installed current nodes
224	`node_default_packages`	`NODE`	`NODE_PACKAGE`	string[]	G	default packages to be installed on all nodes
230	`node_disable_firewall`	`NODE`	`NODE_TUNE`	bool	C	disable node firewall? true by default
231	`node_disable_selinux`	`NODE`	`NODE_TUNE`	bool	C	disable node selinux? true by default
232	`node_disable_numa`	`NODE`	`NODE_TUNE`	bool	C	disable node numa, reboot required
233	`node_disable_swap`	`NODE`	`NODE_TUNE`	bool	C	disable node swap, use with caution
234	`node_static_network`	`NODE`	`NODE_TUNE`	bool	C	preserve dns resolver settings after reboot
235	`node_disk_prefetch`	`NODE`	`NODE_TUNE`	bool	C	setup disk prefetch on HDD to increase performance
236	`node_kernel_modules`	`NODE`	`NODE_TUNE`	string[]	C	kernel modules to be enabled on this node
237	`node_hugepage_count`	`NODE`	`NODE_TUNE`	int	C	number of 2MB hugepage, take precedence over ratio
238	`node_hugepage_ratio`	`NODE`	`NODE_TUNE`	float	C	node mem hugepage ratio, 0 disable it by default
239	`node_overcommit_ratio`	`NODE`	`NODE_TUNE`	float	C	node mem overcommit ratio, 0 disable it by default
240	`node_tune`	`NODE`	`NODE_TUNE`	enum	C	node tuned profile: none,oltp,olap,crit,tiny
241	`node_sysctl_params`	`NODE`	`NODE_TUNE`	dict	C	sysctl parameters in k:v format in addition to tuned
250	`node_data`	`NODE`	`NODE_ADMIN`	path	C	node main data directory, `/data` by default
251	`node_admin_enabled`	`NODE`	`NODE_ADMIN`	bool	C	create a admin user on target node?
252	`node_admin_uid`	`NODE`	`NODE_ADMIN`	int	C	uid and gid for node admin user
253	`node_admin_username`	`NODE`	`NODE_ADMIN`	username	C	name of node admin user, `dba` by default
254	`node_admin_ssh_exchange`	`NODE`	`NODE_ADMIN`	bool	C	exchange admin ssh key among node cluster
255	`node_admin_pk_current`	`NODE`	`NODE_ADMIN`	bool	C	add current user’s ssh pk to admin authorized_keys
256	`node_admin_pk_list`	`NODE`	`NODE_ADMIN`	string[]	C	ssh public keys to be added to admin user
260	`node_timezone`	`NODE`	`NODE_TIME`	string	C	setup node timezone, empty string to skip
261	`node_ntp_enabled`	`NODE`	`NODE_TIME`	bool	C	enable chronyd time sync service?
262	`node_ntp_servers`	`NODE`	`NODE_TIME`	string[]	C	ntp servers in `/etc/chrony.conf`
263	`node_crontab_overwrite`	`NODE`	`NODE_TIME`	bool	C	overwrite or append to `/etc/crontab`?
264	`node_crontab`	`NODE`	`NODE_TIME`	string[]	C	crontab entries in `/etc/crontab`
270	`vip_enabled`	`NODE`	`NODE_VIP`	bool	C	enable vip on this node cluster?
271	`vip_address`	`NODE`	`NODE_VIP`	ip	C	node vip address in ipv4 format, required if vip is enabled
272	`vip_vrid`	`NODE`	`NODE_VIP`	int	C	required, integer, 1-254, should be unique among same VLAN
273	`vip_role`	`NODE`	`NODE_VIP`	enum	I	optional, `master/backup`, backup by default, use as init role
274	`vip_preempt`	`NODE`	`NODE_VIP`	bool	C/I	optional, `true/false`, false by default, enable vip preemption
275	`vip_interface`	`NODE`	`NODE_VIP`	string	C/I	node vip network interface to listen, `eth0` by default
276	`vip_dns_suffix`	`NODE`	`NODE_VIP`	string	C	node vip dns name suffix, empty string by default
277	`vip_exporter_port`	`NODE`	`NODE_VIP`	port	C	keepalived exporter listen port, 9650 by default
280	`haproxy_enabled`	`NODE`	`HAPROXY`	bool	C	enable haproxy on this node?
281	`haproxy_clean`	`NODE`	`HAPROXY`	bool	G/C/A	cleanup all existing haproxy config?
282	`haproxy_reload`	`NODE`	`HAPROXY`	bool	A	reload haproxy after config?
283	`haproxy_auth_enabled`	`NODE`	`HAPROXY`	bool	G	enable authentication for haproxy admin page
284	`haproxy_admin_username`	`NODE`	`HAPROXY`	username	G	haproxy admin username, `admin` by default
285	`haproxy_admin_password`	`NODE`	`HAPROXY`	password	G	haproxy admin password, `pigsty` by default
286	`haproxy_exporter_port`	`NODE`	`HAPROXY`	port	C	haproxy admin/exporter port, 9101 by default
287	`haproxy_client_timeout`	`NODE`	`HAPROXY`	interval	C	client side connection timeout, 24h by default
288	`haproxy_server_timeout`	`NODE`	`HAPROXY`	interval	C	server side connection timeout, 24h by default
289	`haproxy_services`	`NODE`	`HAPROXY`	service[]	C	list of haproxy service to be exposed on node
290	`node_exporter_enabled`	`NODE`	`NODE_EXPORTER`	bool	C	setup node_exporter on this node?
291	`node_exporter_port`	`NODE`	`NODE_EXPORTER`	port	C	node exporter listen port, 9100 by default
292	`node_exporter_options`	`NODE`	`NODE_EXPORTER`	arg	C	extra server options for node_exporter
293	`promtail_enabled`	`NODE`	`PROMTAIL`	bool	C	enable promtail logging collector?
294	`promtail_clean`	`NODE`	`PROMTAIL`	bool	G/A	purge existing promtail status file during init?
295	`promtail_port`	`NODE`	`PROMTAIL`	port	C	promtail listen port, 9080 by default
296	`promtail_positions`	`NODE`	`PROMTAIL`	path	C	promtail position status file path
401	`docker_enabled`	`NODE`	`DOCKER`	bool	C	enable docker on this node?
402	`docker_cgroups_driver`	`NODE`	`DOCKER`	enum	C	docker cgroup fs driver: cgroupfs,systemd
403	`docker_registry_mirrors`	`NODE`	`DOCKER`	string[]	C	docker registry mirror list
404	`docker_image_cache`	`NODE`	`DOCKER`	path	C	docker image cache dir, `/tmp/docker` by default
501	`etcd_seq`	`ETCD`	`ETCD`	int	I	etcd instance identifier, REQUIRED
502	`etcd_cluster`	`ETCD`	`ETCD`	string	C	etcd cluster & group name, etcd by default
503	`etcd_safeguard`	`ETCD`	`ETCD`	bool	G/C/A	prevent purging running etcd instance?
504	`etcd_clean`	`ETCD`	`ETCD`	bool	G/C/A	purging existing etcd during initialization?
505	`etcd_data`	`ETCD`	`ETCD`	path	C	etcd data directory, /data/etcd by default
506	`etcd_port`	`ETCD`	`ETCD`	port	C	etcd client port, 2379 by default
507	`etcd_peer_port`	`ETCD`	`ETCD`	port	C	etcd peer port, 2380 by default
508	`etcd_init`	`ETCD`	`ETCD`	enum	C	etcd initial cluster state, new or existing
509	`etcd_election_timeout`	`ETCD`	`ETCD`	int	C	etcd election timeout, 1000ms by default
510	`etcd_heartbeat_interval`	`ETCD`	`ETCD`	int	C	etcd heartbeat interval, 100ms by default
601	`minio_seq`	`MINIO`	`MINIO`	int	I	minio instance identifier, REQUIRED
602	`minio_cluster`	`MINIO`	`MINIO`	string	C	minio cluster name, minio by default
603	`minio_clean`	`MINIO`	`MINIO`	bool	G/C/A	cleanup minio during init?, false by default
604	`minio_user`	`MINIO`	`MINIO`	username	C	minio os user, `minio` by default
605	`minio_node`	`MINIO`	`MINIO`	string	C	minio node name pattern
606	`minio_data`	`MINIO`	`MINIO`	path	C	minio data dir(s), use {x…y} to specify multi drivers
607	`minio_domain`	`MINIO`	`MINIO`	string	G	minio service domain name, `sss.pigsty` by default
608	`minio_port`	`MINIO`	`MINIO`	port	C	minio service port, 9000 by default
609	`minio_admin_port`	`MINIO`	`MINIO`	port	C	minio console port, 9001 by default
610	`minio_access_key`	`MINIO`	`MINIO`	username	C	root access key, `minioadmin` by default
611	`minio_secret_key`	`MINIO`	`MINIO`	password	C	root secret key, `minioadmin` by default
612	`minio_extra_vars`	`MINIO`	`MINIO`	string	C	extra environment variables for minio server
613	`minio_alias`	`MINIO`	`MINIO`	string	G	alias name for local minio deployment
614	`minio_buckets`	`MINIO`	`MINIO`	bucket[]	C	list of minio bucket to be created
615	`minio_users`	`MINIO`	`MINIO`	user[]	C	list of minio user to be created
701	`redis_cluster`	`REDIS`	`REDIS`	string	C	redis cluster name, required identity parameter
702	`redis_instances`	`REDIS`	`REDIS`	dict	I	redis instances definition on this redis node
703	`redis_node`	`REDIS`	`REDIS`	int	I	redis node sequence number, node int id required
710	`redis_fs_main`	`REDIS`	`REDIS`	path	C	redis main data mountpoint, `/data` by default
711	`redis_exporter_enabled`	`REDIS`	`REDIS`	bool	C	install redis exporter on redis nodes?
712	`redis_exporter_port`	`REDIS`	`REDIS`	port	C	redis exporter listen port, 9121 by default
713	`redis_exporter_options`	`REDIS`	`REDIS`	string	C/I	cli args and extra options for redis exporter
720	`redis_safeguard`	`REDIS`	`REDIS`	bool	G/C/A	prevent purging running redis instance?
721	`redis_clean`	`REDIS`	`REDIS`	bool	G/C/A	purging existing redis during init?
722	`redis_rmdata`	`REDIS`	`REDIS`	bool	G/C/A	remove redis data when purging redis server?
723	`redis_mode`	`REDIS`	`REDIS`	enum	C	redis mode: standalone,cluster,sentinel
724	`redis_conf`	`REDIS`	`REDIS`	string	C	redis config template path, except sentinel
725	`redis_bind_address`	`REDIS`	`REDIS`	ip	C	redis bind address, empty string will use host ip
726	`redis_max_memory`	`REDIS`	`REDIS`	size	C/I	max memory used by each redis instance
727	`redis_mem_policy`	`REDIS`	`REDIS`	enum	C	redis memory eviction policy
728	`redis_password`	`REDIS`	`REDIS`	password	C	redis password, empty string will disable password
729	`redis_rdb_save`	`REDIS`	`REDIS`	string[]	C	redis rdb save directives, disable with empty list
730	`redis_aof_enabled`	`REDIS`	`REDIS`	bool	C	enable redis append only file?
731	`redis_rename_commands`	`REDIS`	`REDIS`	dict	C	rename redis dangerous commands
732	`redis_cluster_replicas`	`REDIS`	`REDIS`	int	C	replica number for one master in redis cluster
733	`redis_sentinel_monitor`	`REDIS`	`REDIS`	master[]	C	sentinel master list, works on sentinel cluster only
801	`pg_mode`	`PGSQL`	`PG_ID`	enum	C	pgsql cluster mode: pgsql,citus,gpsql
802	`pg_cluster`	`PGSQL`	`PG_ID`	string	C	pgsql cluster name, REQUIRED identity parameter
803	`pg_seq`	`PGSQL`	`PG_ID`	int	I	pgsql instance seq number, REQUIRED identity parameter
804	`pg_role`	`PGSQL`	`PG_ID`	enum	I	pgsql role, REQUIRED, could be primary,replica,offline
805	`pg_instances`	`PGSQL`	`PG_ID`	dict	I	define multiple pg instances on node in `{port:ins_vars}` format
806	`pg_upstream`	`PGSQL`	`PG_ID`	ip	I	repl upstream ip addr for standby cluster or cascade replica
807	`pg_shard`	`PGSQL`	`PG_ID`	string	C	pgsql shard name, optional identity for sharding clusters
808	`pg_group`	`PGSQL`	`PG_ID`	int	C	pgsql shard index number, optional identity for sharding clusters
809	`gp_role`	`PGSQL`	`PG_ID`	enum	C	greenplum role of this cluster, could be master or segment
810	`pg_exporters`	`PGSQL`	`PG_ID`	dict	C	additional pg_exporters to monitor remote postgres instances
811	`pg_offline_query`	`PGSQL`	`PG_ID`	bool	I	set to true to enable offline query on this instance
820	`pg_users`	`PGSQL`	`PG_BUSINESS`	user[]	C	postgres business users
821	`pg_databases`	`PGSQL`	`PG_BUSINESS`	database[]	C	postgres business databases
822	`pg_services`	`PGSQL`	`PG_BUSINESS`	service[]	C	postgres business services
823	`pg_hba_rules`	`PGSQL`	`PG_BUSINESS`	hba[]	C	business hba rules for postgres
824	`pgb_hba_rules`	`PGSQL`	`PG_BUSINESS`	hba[]	C	business hba rules for pgbouncer
831	`pg_replication_username`	`PGSQL`	`PG_BUSINESS`	username	G	postgres replication username, `replicator` by default
832	`pg_replication_password`	`PGSQL`	`PG_BUSINESS`	password	G	postgres replication password, `DBUser.Replicator` by default
833	`pg_admin_username`	`PGSQL`	`PG_BUSINESS`	username	G	postgres admin username, `dbuser_dba` by default
834	`pg_admin_password`	`PGSQL`	`PG_BUSINESS`	password	G	postgres admin password in plain text, `DBUser.DBA` by default
835	`pg_monitor_username`	`PGSQL`	`PG_BUSINESS`	username	G	postgres monitor username, `dbuser_monitor` by default
836	`pg_monitor_password`	`PGSQL`	`PG_BUSINESS`	password	G	postgres monitor password, `DBUser.Monitor` by default
837	`pg_dbsu_password`	`PGSQL`	`PG_BUSINESS`	password	G/C	postgres dbsu password, empty string disable it by default
840	`pg_dbsu`	`PGSQL`	`PG_INSTALL`	username	C	os dbsu name, postgres by default, better not change it
841	`pg_dbsu_uid`	`PGSQL`	`PG_INSTALL`	int	C	os dbsu uid and gid, 26 for default postgres users and groups
842	`pg_dbsu_sudo`	`PGSQL`	`PG_INSTALL`	enum	C	dbsu sudo privilege, none,limit,all,nopass. limit by default
843	`pg_dbsu_home`	`PGSQL`	`PG_INSTALL`	path	C	postgresql home directory, `/var/lib/pgsql` by default
844	`pg_dbsu_ssh_exchange`	`PGSQL`	`PG_INSTALL`	bool	C	exchange postgres dbsu ssh key among same pgsql cluster
845	`pg_version`	`PGSQL`	`PG_INSTALL`	enum	C	postgres major version to be installed, 16 by default
846	`pg_bin_dir`	`PGSQL`	`PG_INSTALL`	path	C	postgres binary dir, `/usr/pgsql/bin` by default
847	`pg_log_dir`	`PGSQL`	`PG_INSTALL`	path	C	postgres log dir, `/pg/log/postgres` by default
848	`pg_packages`	`PGSQL`	`PG_INSTALL`	string[]	C	pg packages to be installed, `${pg_version}` will be replaced
849	`pg_extensions`	`PGSQL`	`PG_INSTALL`	string[]	C	pg extensions to be installed, `${pg_version}` will be replaced
850	`pg_safeguard`	`PGSQL`	`PG_BOOTSTRAP`	bool	G/C/A	prevent purging running postgres instance? false by default
851	`pg_clean`	`PGSQL`	`PG_BOOTSTRAP`	bool	G/C/A	purging existing postgres during pgsql init? true by default
852	`pg_data`	`PGSQL`	`PG_BOOTSTRAP`	path	C	postgres data directory, `/pg/data` by default
853	`pg_fs_main`	`PGSQL`	`PG_BOOTSTRAP`	path	C	mountpoint/path for postgres main data, `/data` by default
854	`pg_fs_bkup`	`PGSQL`	`PG_BOOTSTRAP`	path	C	mountpoint/path for pg backup data, `/data/backup` by default
855	`pg_storage_type`	`PGSQL`	`PG_BOOTSTRAP`	enum	C	storage type for pg main data, SSD,HDD, SSD by default
856	`pg_dummy_filesize`	`PGSQL`	`PG_BOOTSTRAP`	size	C	size of `/pg/dummy`, hold 64MB disk space for emergency use
857	`pg_listen`	`PGSQL`	`PG_BOOTSTRAP`	ip(s)	C/I	postgres/pgbouncer listen addresses, comma separated list
858	`pg_port`	`PGSQL`	`PG_BOOTSTRAP`	port	C	postgres listen port, 5432 by default
859	`pg_localhost`	`PGSQL`	`PG_BOOTSTRAP`	path	C	postgres unix socket dir for localhost connection
860	`pg_namespace`	`PGSQL`	`PG_BOOTSTRAP`	path	C	top level key namespace in etcd, used by patroni & vip
861	`patroni_enabled`	`PGSQL`	`PG_BOOTSTRAP`	bool	C	if disabled, no postgres cluster will be created during init
862	`patroni_mode`	`PGSQL`	`PG_BOOTSTRAP`	enum	C	patroni working mode: default,pause,remove
863	`patroni_port`	`PGSQL`	`PG_BOOTSTRAP`	port	C	patroni listen port, 8008 by default
864	`patroni_log_dir`	`PGSQL`	`PG_BOOTSTRAP`	path	C	patroni log dir, `/pg/log/patroni` by default
865	`patroni_ssl_enabled`	`PGSQL`	`PG_BOOTSTRAP`	bool	G	secure patroni RestAPI communications with SSL?
866	`patroni_watchdog_mode`	`PGSQL`	`PG_BOOTSTRAP`	enum	C	patroni watchdog mode: automatic,required,off. off by default
867	`patroni_username`	`PGSQL`	`PG_BOOTSTRAP`	username	C	patroni restapi username, `postgres` by default
868	`patroni_password`	`PGSQL`	`PG_BOOTSTRAP`	password	C	patroni restapi password, `Patroni.API` by default
869	`patroni_citus_db`	`PGSQL`	`PG_BOOTSTRAP`	string	C	citus database managed by patroni, postgres by default
870	`pg_conf`	`PGSQL`	`PG_BOOTSTRAP`	enum	C	config template: oltp,olap,crit,tiny. `oltp.yml` by default
871	`pg_max_conn`	`PGSQL`	`PG_BOOTSTRAP`	int	C	postgres max connections, `auto` will use recommended value
872	`pg_shared_buffer_ratio`	`PGSQL`	`PG_BOOTSTRAP`	float	C	postgres shared buffer memory ratio, 0.25 by default, 0.1~0.4
873	`pg_rto`	`PGSQL`	`PG_BOOTSTRAP`	int	C	recovery time objective in seconds, `30s` by default
874	`pg_rpo`	`PGSQL`	`PG_BOOTSTRAP`	int	C	recovery point objective in bytes, `1MiB` at most by default
875	`pg_libs`	`PGSQL`	`PG_BOOTSTRAP`	string	C	preloaded libraries, `timescaledb,pg_stat_statements,auto_explain` by default
876	`pg_delay`	`PGSQL`	`PG_BOOTSTRAP`	interval	I	replication apply delay for standby cluster leader
877	`pg_checksum`	`PGSQL`	`PG_BOOTSTRAP`	bool	C	enable data checksum for postgres cluster?
878	`pg_pwd_enc`	`PGSQL`	`PG_BOOTSTRAP`	enum	C	passwords encryption algorithm: md5,scram-sha-256
879	`pg_encoding`	`PGSQL`	`PG_BOOTSTRAP`	enum	C	database cluster encoding, `UTF8` by default
880	`pg_locale`	`PGSQL`	`PG_BOOTSTRAP`	enum	C	database cluster local, `C` by default
881	`pg_lc_collate`	`PGSQL`	`PG_BOOTSTRAP`	enum	C	database cluster collate, `C` by default
882	`pg_lc_ctype`	`PGSQL`	`PG_BOOTSTRAP`	enum	C	database character type, `en_US.UTF8` by default
890	`pgbouncer_enabled`	`PGSQL`	`PG_BOOTSTRAP`	bool	C	if disabled, pgbouncer will not be launched on pgsql host
891	`pgbouncer_port`	`PGSQL`	`PG_BOOTSTRAP`	port	C	pgbouncer listen port, 6432 by default
892	`pgbouncer_log_dir`	`PGSQL`	`PG_BOOTSTRAP`	path	C	pgbouncer log dir, `/pg/log/pgbouncer` by default
893	`pgbouncer_auth_query`	`PGSQL`	`PG_BOOTSTRAP`	bool	C	query postgres to retrieve unlisted business users?
894	`pgbouncer_poolmode`	`PGSQL`	`PG_BOOTSTRAP`	enum	C	pooling mode: transaction,session,statement, transaction by default
895	`pgbouncer_sslmode`	`PGSQL`	`PG_BOOTSTRAP`	enum	C	pgbouncer client ssl mode, disable by default
900	`pg_provision`	`PGSQL`	`PG_PROVISION`	bool	C	provision postgres cluster after bootstrap
901	`pg_init`	`PGSQL`	`PG_PROVISION`	string	G/C	provision init script for cluster template, `pg-init` by default
902	`pg_default_roles`	`PGSQL`	`PG_PROVISION`	role[]	G/C	default roles and users in postgres cluster
903	`pg_default_privileges`	`PGSQL`	`PG_PROVISION`	string[]	G/C	default privileges when created by admin user
904	`pg_default_schemas`	`PGSQL`	`PG_PROVISION`	string[]	G/C	default schemas to be created
905	`pg_default_extensions`	`PGSQL`	`PG_PROVISION`	extension[]	G/C	default extensions to be created
906	`pg_reload`	`PGSQL`	`PG_PROVISION`	bool	A	reload postgres after hba changes
907	`pg_default_hba_rules`	`PGSQL`	`PG_PROVISION`	hba[]	G/C	postgres default host-based authentication rules
908	`pgb_default_hba_rules`	`PGSQL`	`PG_PROVISION`	hba[]	G/C	pgbouncer default host-based authentication rules
910	`pgbackrest_enabled`	`PGSQL`	`PG_BACKUP`	bool	C	enable pgbackrest on pgsql host?
911	`pgbackrest_clean`	`PGSQL`	`PG_BACKUP`	bool	C	remove pg backup data during init?
912	`pgbackrest_log_dir`	`PGSQL`	`PG_BACKUP`	path	C	pgbackrest log dir, `/pg/log/pgbackrest` by default
913	`pgbackrest_method`	`PGSQL`	`PG_BACKUP`	enum	C	pgbackrest repo method: local,minio,etc…
914	`pgbackrest_repo`	`PGSQL`	`PG_BACKUP`	dict	G/C	pgbackrest repo: https://pgbackrest.org/configuration.html#section-repository
921	`pg_weight`	`PGSQL`	`PG_SERVICE`	int	I	relative load balance weight in service, 100 by default, 0-255
922	`pg_service_provider`	`PGSQL`	`PG_SERVICE`	string	G/C	dedicate haproxy node group name, or empty string for local nodes by default
923	`pg_default_service_dest`	`PGSQL`	`PG_SERVICE`	enum	G/C	default service destination if svc.dest=‘default’
924	`pg_default_services`	`PGSQL`	`PG_SERVICE`	service[]	G/C	postgres default service definitions
931	`pg_vip_enabled`	`PGSQL`	`PG_SERVICE`	bool	C	enable a l2 vip for pgsql primary? false by default
932	`pg_vip_address`	`PGSQL`	`PG_SERVICE`	cidr4	C	vip address in `<ipv4>/<mask>` format, require if vip is enabled
933	`pg_vip_interface`	`PGSQL`	`PG_SERVICE`	string	C/I	vip network interface to listen, eth0 by default
934	`pg_dns_suffix`	`PGSQL`	`PG_SERVICE`	string	C	pgsql dns suffix, ’’ by default
935	`pg_dns_target`	`PGSQL`	`PG_SERVICE`	enum	C	auto, primary, vip, none, or ad hoc ip
940	`pg_exporter_enabled`	`PGSQL`	`PG_EXPORTER`	bool	C	enable pg_exporter on pgsql hosts?
941	`pg_exporter_config`	`PGSQL`	`PG_EXPORTER`	string	C	pg_exporter configuration file name
942	`pg_exporter_cache_ttls`	`PGSQL`	`PG_EXPORTER`	string	C	pg_exporter collector ttl stage in seconds, ‘1,10,60,300’ by default
943	`pg_exporter_port`	`PGSQL`	`PG_EXPORTER`	port	C	pg_exporter listen port, 9630 by default
944	`pg_exporter_params`	`PGSQL`	`PG_EXPORTER`	string	C	extra url parameters for pg_exporter dsn
945	`pg_exporter_url`	`PGSQL`	`PG_EXPORTER`	pgurl	C	overwrite auto-generate pg dsn if specified
946	`pg_exporter_auto_discovery`	`PGSQL`	`PG_EXPORTER`	bool	C	enable auto database discovery? enabled by default
947	`pg_exporter_exclude_database`	`PGSQL`	`PG_EXPORTER`	string	C	csv of database that WILL NOT be monitored during auto-discovery
948	`pg_exporter_include_database`	`PGSQL`	`PG_EXPORTER`	string	C	csv of database that WILL BE monitored during auto-discovery
949	`pg_exporter_connect_timeout`	`PGSQL`	`PG_EXPORTER`	int	C	pg_exporter connect timeout in ms, 200 by default
950	`pg_exporter_options`	`PGSQL`	`PG_EXPORTER`	arg	C	overwrite extra options for pg_exporter
951	`pgbouncer_exporter_enabled`	`PGSQL`	`PG_EXPORTER`	bool	C	enable pgbouncer_exporter on pgsql hosts?
952	`pgbouncer_exporter_port`	`PGSQL`	`PG_EXPORTER`	port	C	pgbouncer_exporter listen port, 9631 by default
953	`pgbouncer_exporter_url`	`PGSQL`	`PG_EXPORTER`	pgurl	C	overwrite auto-generate pgbouncer dsn if specified
954	`pgbouncer_exporter_options`	`PGSQL`	`PG_EXPORTER`	arg	C	overwrite extra options for pgbouncer_exporter

`INFRA`

Parameters about pigsty infrastructure components: local yum repo, nginx, dnsmasq, prometheus, grafana, loki, alertmanager, pushgateway, blackbox_exporter, etc…

`META`

This section contains some metadata of current pigsty deployments, such as version string, admin node IP address, repo mirror region and http(s) proxy when downloading pacakges.

version: v2.6.0                   # pigsty version string
admin_ip: 10.10.10.10             # admin node ip address
region: default                   # upstream mirror region: default,china,europe
proxy_env:                        # global proxy env when downloading packages
  no_proxy: "localhost,127.0.0.1,10.0.0.0/8,192.168.0.0/16,*.pigsty,*.aliyun.com,mirrors.*,*.myqcloud.com,*.tsinghua.edu.cn"
  # http_proxy:  # set your proxy here: e.g http://user:[email protected]
  # https_proxy: # set your proxy here: e.g http://user:[email protected]
  # all_proxy:   # set your proxy here: e.g http://user:[email protected]

`version`

pigsty version string

default value:v2.6.0

It will be used for pigsty introspection & content rendering.

`admin_ip`

admin node ip address

default value:10.10.10.10

Node with this ip address will be treated as admin node, usually point to the first node that install Pigsty.

The default value 10.10.10.10 is a placeholder which will be replaced during configure

This parameter is referenced by many other parameters, such as:

The exact string ${admin_ip} will be replaced with the actual admin_ip for above parameters.

`region`

upstream mirror region: default,china,europe

default value: default

If a region other than default is set, and there’s a corresponding entry in repo_upstream.[repo].baseurl, it will be used instead of default.

For example, if china is used, pigsty will use China mirrors designated in repo_upstream if applicable.

`proxy_env`

global proxy env when downloading packages

default value:

proxy_env: # global proxy env when downloading packages
  http_proxy: 'http://username:[email protected]'
  https_proxy: 'http://username:[email protected]'
  all_proxy: 'http://username:[email protected]'
  no_proxy: "localhost,127.0.0.1,10.0.0.0/8,192.168.0.0/16,*.pigsty,*.aliyun.com,mirrors.aliyuncs.com,mirrors.tuna.tsinghua.edu.cn,mirrors.zju.edu.cn"

It’s quite important to use http proxy in restricted production environment, or your Internet access is blocked (e.g. Mainland China)

`CA`

Self-Signed CA used by pigsty. It is required to support advanced security features.

ca_method: create                 # create,recreate,copy, create by default
ca_cn: pigsty-ca                  # ca common name, fixed as pigsty-ca
cert_validity: 7300d              # cert validity, 20 years by default

`ca_method`

available options: create,recreate,copy

default value: create

create: Create a new CA public-private key pair if not exists, use if exists
recreate: Always re-create a new CA public-private key pair
copy: Copy the existing CA public and private keys from local files/pki/ca, abort if missing

If you already have a pair of ca.crt and ca.key, put them under files/pki/ca and set ca_method to copy.

`ca_cn`

ca common name, not recommending to change it.

default value: pigsty-ca

you can check that with openssl x509 -text -in /etc/pki/ca.crt

`cert_validity`

cert validity, 20 years by default, which is enough for most scenarios

default value: 7300d

`INFRA_ID`

Infrastructure identity and portal definition.

#infra_seq: 1                     # infra node identity, explicitly required
infra_portal:                     # infra services exposed via portal
  home         : { domain: h.pigsty }
  grafana      : { domain: g.pigsty ,endpoint: "${admin_ip}:3000" ,websocket: true }
  prometheus   : { domain: p.pigsty ,endpoint: "${admin_ip}:9090" }
  alertmanager : { domain: a.pigsty ,endpoint: "${admin_ip}:9093" }
  blackbox     : { endpoint: "${admin_ip}:9115" }
  loki         : { endpoint: "${admin_ip}:3100" }

`infra_seq`

infra node identity, REQUIRED, no default value, you have to assign it explicitly.

`infra_portal`

infra services exposed via portal.

default value will expose home, grafana, prometheus, alertmanager via nginx with corresponding domain names.

infra_portal:                     # infra services exposed via portal
  home         : { domain: h.pigsty }
  grafana      : { domain: g.pigsty ,endpoint: "${admin_ip}:3000" ,websocket: true }
  prometheus   : { domain: p.pigsty ,endpoint: "${admin_ip}:9090" }
  alertmanager : { domain: a.pigsty ,endpoint: "${admin_ip}:9093" }
  blackbox     : { endpoint: "${admin_ip}:9115" }
  loki         : { endpoint: "${admin_ip}:3100" }

Each record contains three subsections: key as name, representing the component name, the external access domain, and the internal TCP port, respectively. and the value contains domain, and endpoint, and other options.

The name definition of the default record is fixed and referenced by other modules, so do not modify the default entry names.
The domain is the domain name that should be used for external access to this upstream server. domain names will be added to Nginx SSL cert SAN.
The endpoint is an internally reachable TCP port. and ${admin_ip} will be replaced with actual admin_ip in runtime.
If websocket is set to true, http protocol will be auto upgraded for ws connections.
If scheme is given (http or https), it will be used as part of proxy_pass URL.

`REPO`

This section is about local software repo. Pigsty will create a local software repo (APT/YUM) when init an infra node.

In the initialization process, Pigsty will download all packages and their dependencies (specified by repo_packages) from the Internet upstream repo (specified by repo_upstream) to {{ nginx_home }} / {{ repo_name }} (default is /www/pigsty), and the total size of all dependent software is about 1GB or so.

When creating a local repo, Pigsty will skip the software download phase if the directory already exists and if there is a marker file named repo_complete in the dir.

If the download speed of some packages is too slow, you can set the download proxy to complete the first download by using the proxy_env config entry or directly download the pre-packaged offline package, which is essentially a local software source built on the same operating system.

repo_enabled: true                # create a yum repo on this infra node?
repo_home: /www                   # repo home dir, `/www` by default
repo_name: pigsty                 # repo name, pigsty by default
repo_endpoint: http://${admin_ip}:80 # access point to this repo by domain or ip:port
repo_remove: true                 # remove existing upstream repo
repo_modules: infra,node,pgsql    # install upstream repo during repo bootstrap
repo_upstream:                    # where to download
  - { name: pigsty-local   ,description: 'Pigsty Local'      ,module: local ,releases: [7,8,9] ,baseurl: { default: 'http://${admin_ip}/pigsty'  }} # used by intranet nodes
  - { name: pigsty-infra   ,description: 'Pigsty INFRA'      ,module: infra ,releases: [7,8,9] ,baseurl: { default: 'https://repo.pigsty.io/rpm/infra/$basearch' ,china: 'https://repo.pigsty.cc/rpm/infra/$basearch' }}
  - { name: pigsty-pgsql   ,description: 'Pigsty PGSQL'      ,module: pgsql ,releases: [7,8,9] ,baseurl: { default: 'https://repo.pigsty.io/rpm/pgsql/el$releasever.$basearch' ,china: 'https://repo.pigsty.cc/rpm/pgsql/el$releasever.$basearch' }}
  - { name: nginx          ,description: 'Nginx Repo'        ,module: infra ,releases: [7,8,9] ,baseurl: { default: 'https://nginx.org/packages/centos/$releasever/$basearch/' }}
  - { name: docker-ce      ,description: 'Docker CE'         ,module: infra ,releases: [7,8,9] ,baseurl: { default: 'https://download.docker.com/linux/centos/$releasever/$basearch/stable'        ,china: 'https://mirrors.aliyun.com/docker-ce/linux/centos/$releasever/$basearch/stable'  ,europe: 'https://mirrors.xtom.de/docker-ce/linux/centos/$releasever/$basearch/stable' }}
  - { name: base           ,description: 'EL 7 Base'         ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://mirror.centos.org/centos/$releasever/os/$basearch/'                    ,china: 'https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/os/$basearch/'           ,europe: 'https://mirrors.xtom.de/centos/$releasever/os/$basearch/'           }}
  - { name: updates        ,description: 'EL 7 Updates'      ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://mirror.centos.org/centos/$releasever/updates/$basearch/'               ,china: 'https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/updates/$basearch/'      ,europe: 'https://mirrors.xtom.de/centos/$releasever/updates/$basearch/'      }}
  - { name: extras         ,description: 'EL 7 Extras'       ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://mirror.centos.org/centos/$releasever/extras/$basearch/'                ,china: 'https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/extras/$basearch/'       ,europe: 'https://mirrors.xtom.de/centos/$releasever/extras/$basearch/'       }}
  - { name: epel           ,description: 'EL 7 EPEL'         ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://download.fedoraproject.org/pub/epel/$releasever/$basearch/'            ,china: 'https://mirrors.tuna.tsinghua.edu.cn/epel/$releasever/$basearch/'                ,europe: 'https://mirrors.xtom.de/epel/$releasever/$basearch/'                }}
  - { name: centos-sclo    ,description: 'EL 7 SCLo'         ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://mirror.centos.org/centos/$releasever/sclo/$basearch/sclo/'             ,china: 'https://mirrors.aliyun.com/centos/$releasever/sclo/$basearch/sclo/'              ,europe: 'https://mirrors.xtom.de/centos/$releasever/sclo/$basearch/sclo/'    }}
  - { name: centos-sclo-rh ,description: 'EL 7 SCLo rh'      ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://mirror.centos.org/centos/$releasever/sclo/$basearch/rh/'               ,china: 'https://mirrors.aliyun.com/centos/$releasever/sclo/$basearch/rh/'                ,europe: 'https://mirrors.xtom.de/centos/$releasever/sclo/$basearch/rh/'      }}
  - { name: baseos         ,description: 'EL 8+ BaseOS'      ,module: node  ,releases: [  8,9] ,baseurl: { default: 'https://dl.rockylinux.org/pub/rocky/$releasever/BaseOS/$basearch/os/'         ,china: 'https://mirrors.aliyun.com/rockylinux/$releasever/BaseOS/$basearch/os/'          ,europe: 'https://mirrors.xtom.de/rocky/$releasever/BaseOS/$basearch/os/'     }}
  - { name: appstream      ,description: 'EL 8+ AppStream'   ,module: node  ,releases: [  8,9] ,baseurl: { default: 'https://dl.rockylinux.org/pub/rocky/$releasever/AppStream/$basearch/os/'      ,china: 'https://mirrors.aliyun.com/rockylinux/$releasever/AppStream/$basearch/os/'       ,europe: 'https://mirrors.xtom.de/rocky/$releasever/AppStream/$basearch/os/'  }}
  - { name: extras         ,description: 'EL 8+ Extras'      ,module: node  ,releases: [  8,9] ,baseurl: { default: 'https://dl.rockylinux.org/pub/rocky/$releasever/extras/$basearch/os/'         ,china: 'https://mirrors.aliyun.com/rockylinux/$releasever/extras/$basearch/os/'          ,europe: 'https://mirrors.xtom.de/rocky/$releasever/extras/$basearch/os/'     }}
  - { name: crb            ,description: 'EL 9 CRB'          ,module: node  ,releases: [    9] ,baseurl: { default: 'https://dl.rockylinux.org/pub/rocky/$releasever/CRB/$basearch/os/'            ,china: 'https://mirrors.aliyun.com/rockylinux/$releasever/CRB/$basearch/os/'             ,europe: 'https://mirrors.xtom.de/rocky/$releasever/CRB/$basearch/os/'        }}
  - { name: powertools     ,description: 'EL 8 PowerTools'   ,module: node  ,releases: [  8  ] ,baseurl: { default: 'https://dl.rockylinux.org/pub/rocky/$releasever/PowerTools/$basearch/os/'     ,china: 'https://mirrors.aliyun.com/rockylinux/$releasever/PowerTools/$basearch/os/'      ,europe: 'https://mirrors.xtom.de/rocky/$releasever/PowerTools/$basearch/os/' }}
  - { name: epel           ,description: 'EL 8+ EPEL'        ,module: node  ,releases: [  8,9] ,baseurl: { default: 'http://download.fedoraproject.org/pub/epel/$releasever/Everything/$basearch/' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/epel/$releasever/Everything/$basearch/'     ,europe: 'https://mirrors.xtom.de/epel/$releasever/Everything/$basearch/'     }}
  - { name: pgdg-common    ,description: 'PostgreSQL Common' ,module: pgsql ,releases: [7,8,9] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/common/redhat/rhel-$releasever-$basearch' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/common/redhat/rhel-$releasever-$basearch' , europe: 'https://mirrors.xtom.de/postgresql/repos/yum/common/redhat/rhel-$releasever-$basearch' }}
  - { name: pgdg-extras    ,description: 'PostgreSQL Extra'  ,module: pgsql ,releases: [7,8,9] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/common/pgdg-rhel$releasever-extras/redhat/rhel-$releasever-$basearch' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/common/pgdg-rhel$releasever-extras/redhat/rhel-$releasever-$basearch' , europe: 'https://mirrors.xtom.de/postgresql/repos/yum/common/pgdg-rhel$releasever-extras/redhat/rhel-$releasever-$basearch' }}
  - { name: pgdg-el8fix    ,description: 'PostgreSQL EL8FIX' ,module: pgsql ,releases: [  8  ] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/common/pgdg-centos8-sysupdates/redhat/rhel-8-x86_64/' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/common/pgdg-centos8-sysupdates/redhat/rhel-8-x86_64/' , europe: 'https://mirrors.xtom.de/postgresql/repos/yum/common/pgdg-centos8-sysupdates/redhat/rhel-8-x86_64/' } }
  - { name: pgdg-el9fix    ,description: 'PostgreSQL EL9FIX' ,module: pgsql ,releases: [    9] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/common/pgdg-rocky9-sysupdates/redhat/rhel-9-x86_64/'  ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/common/pgdg-rocky9-sysupdates/redhat/rhel-9-x86_64/' , europe: 'https://mirrors.xtom.de/postgresql/repos/yum/common/pgdg-rocky9-sysupdates/redhat/rhel-9-x86_64/' }}
  - { name: pgdg15         ,description: 'PostgreSQL 15'     ,module: pgsql ,releases: [7    ] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/15/redhat/rhel-$releasever-$basearch' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/15/redhat/rhel-$releasever-$basearch' ,europe: 'https://mirrors.xtom.de/postgresql/repos/yum/15/redhat/rhel-$releasever-$basearch' }}
  - { name: pgdg16         ,description: 'PostgreSQL 16'     ,module: pgsql ,releases: [  8,9] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/16/redhat/rhel-$releasever-$basearch' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/16/redhat/rhel-$releasever-$basearch' ,europe: 'https://mirrors.xtom.de/postgresql/repos/yum/16/redhat/rhel-$releasever-$basearch' }}
  - { name: timescaledb    ,description: 'TimescaleDB'       ,module: pgsql ,releases: [7,8,9] ,baseurl: { default: 'https://packagecloud.io/timescale/timescaledb/el/$releasever/$basearch'  }}
repo_packages:
  - ansible python3 python3-pip python3-virtualenv python3-requests python3-jmespath python3.11-jmespath python3.11-pip dnf-utils modulemd-tools createrepo_c sshpass # Distro & Boot
  - nginx dnsmasq etcd haproxy vip-manager pg_exporter pgbackrest_exporter                                                                                            # Pigsty Addons
  - grafana loki logcli promtail prometheus2 alertmanager pushgateway node_exporter blackbox_exporter nginx_exporter keepalived_exporter                              # Infra Packages
  - lz4 unzip bzip2 zlib yum pv jq git ncdu make patch bash lsof wget uuid tuned nvme-cli numactl grubby sysstat iotop htop rsync tcpdump perf flamegraph             # Node Tools 1
  - netcat socat ftp lrzsz net-tools ipvsadm bind-utils telnet audit ca-certificates openssl openssh-clients readline vim-minimal keepalived chrony                   # Node Tools 2
  - patroni patroni-etcd pgbouncer pgbadger pgbackrest pgloader pg_activity pg_filedump timescaledb-tools scws libduckdb pgFormatter # pgxnclient missing in el9      # PGSQL Common Tools
  - postgresql16* pg_repack_16* wal2json_16* passwordcheck_cracklib_16* pglogical_16* pg_cron_16* postgis34_16* timescaledb-2-postgresql-16* pgvector_16* citus_16*   # PGDG 16 Packages
  - pgml_16* pg_graphql_16 pg_net_16* pgsql-http_16* pgsql-gzip_16* vault_16 pgjwt_16 pg_tle_16* pg_roaringbitmap_16* pointcloud_16* zhparser_16* hydra_16* apache-age_16* duckdb_fdw_16* pg_sparse_16* pg_sparse_16* pg_bm25_16* pg_analytics_16*
  - orafce_16* mongo_fdw_16* tds_fdw_16* mysql_fdw_16 hdfs_fdw_16 sqlite_fdw_16 pgbouncer_fdw_16 powa_16* pg_stat_kcache_16* pg_stat_monitor_16* pg_qualstats_16 pg_track_settings_16 pg_wait_sampling_16 hll_16 pgaudit_16
  - plprofiler_16* plsh_16* pldebugger_16 plpgsql_check_16* pgtt_16 pgq_16* pgsql_tweaks_16 count_distinct_16 hypopg_16 timestamp9_16* semver_16* prefix_16* periods_16 ip4r_16 tdigest_16 pgmp_16 extra_window_functions_16 topn_16
  - pg_background_16 e-maj_16 pg_prioritize_16 pgcryptokey_16 logerrors_16 pg_top_16 pg_comparator_16 pg_ivm_16* pgsodium_16* pgfincore_16* ddlx_16 credcheck_16 safeupdate_16 pg_squeeze_16* pg_fkpart_16 pg_jobmon_16
  - pg_partman_16 pg_permissions_16 pgexportdoc_16 pgimportdoc_16 pg_statement_rollback_16* pg_hint_plan_16* pg_auth_mon_16 pg_checksums_16 pg_failover_slots_16 pg_readonly_16* pg_uuidv7_16* set_user_16* rum_16
  - redis_exporter mysqld_exporter mongodb_exporter docker-ce docker-compose-plugin redis minio mcli ferretdb duckdb sealos  # Miscellaneous Packages
  #- mysqlcompat_16 system_stats_16 multicorn2_16* plproxy_16 geoip_16 pgcopydb_16 pg_catcheck_16 pg_store_plans_16* postgresql-unit_16 # not available for PG 16 yet
repo_url_packages:
  - https://repo.pigsty.cc/etc/pev.html
  - https://repo.pigsty.cc/etc/chart.tgz
  - https://repo.pigsty.cc/etc/plugins.tgz

`repo_enabled`

create a yum repo on this infra node? default value: true

If you have multiple infra nodes, you can disable yum repo on other standby nodes to reduce Internet traffic.

`repo_home`

repo home dir, /www by default

`repo_name`

repo name, pigsty by default, it is not wise to change this value

`repo_endpoint`

access point to this repo by domain or ip:port, default value: http://${admin_ip}:80

If you have changed the nginx_port or nginx_ssl_port, or use a different infra node from admin node, please adjust this parameter accordingly.

The ${admin_ip} will be replaced with actual admin_ip during runtime.

`repo_remove`

remove existing upstream repo, default value: true

If you want to keep existing upstream repo, set this value to false.

`repo_modules`

which repo modules are installed in repo_upstream, default value: infra,node,pgsql

This is a comma separated value string, it is used to filter entries in repo_upstream with corresponding module field.

For Ubuntu / Debian users, you can add redis to the list: infra,node,pgsql,redis

`repo_upstream`

where to download upstream packages, default values are for EL 7/8/9:

repo_upstream:                    # where to download
  - { name: pigsty-local   ,description: 'Pigsty Local'      ,module: local ,releases: [7,8,9] ,baseurl: { default: 'http://${admin_ip}/pigsty'  }} # used by intranet nodes
  - { name: pigsty-infra   ,description: 'Pigsty INFRA'      ,module: infra ,releases: [7,8,9] ,baseurl: { default: 'https://repo.pigsty.io/rpm/infra/$basearch' ,china: 'https://repo.pigsty.cc/rpm/infra/$basearch' }}
  - { name: pigsty-pgsql   ,description: 'Pigsty PGSQL'      ,module: pgsql ,releases: [7,8,9] ,baseurl: { default: 'https://repo.pigsty.io/rpm/pgsql/el$releasever.$basearch' ,china: 'https://repo.pigsty.cc/rpm/pgsql/el$releasever.$basearch' }}
  - { name: nginx          ,description: 'Nginx Repo'        ,module: infra ,releases: [7,8,9] ,baseurl: { default: 'https://nginx.org/packages/centos/$releasever/$basearch/' }}
  - { name: docker-ce      ,description: 'Docker CE'         ,module: infra ,releases: [7,8,9] ,baseurl: { default: 'https://download.docker.com/linux/centos/$releasever/$basearch/stable'        ,china: 'https://mirrors.aliyun.com/docker-ce/linux/centos/$releasever/$basearch/stable'  ,europe: 'https://mirrors.xtom.de/docker-ce/linux/centos/$releasever/$basearch/stable' }}
  - { name: base           ,description: 'EL 7 Base'         ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://mirror.centos.org/centos/$releasever/os/$basearch/'                    ,china: 'https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/os/$basearch/'           ,europe: 'https://mirrors.xtom.de/centos/$releasever/os/$basearch/'           }}
  - { name: updates        ,description: 'EL 7 Updates'      ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://mirror.centos.org/centos/$releasever/updates/$basearch/'               ,china: 'https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/updates/$basearch/'      ,europe: 'https://mirrors.xtom.de/centos/$releasever/updates/$basearch/'      }}
  - { name: extras         ,description: 'EL 7 Extras'       ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://mirror.centos.org/centos/$releasever/extras/$basearch/'                ,china: 'https://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/extras/$basearch/'       ,europe: 'https://mirrors.xtom.de/centos/$releasever/extras/$basearch/'       }}
  - { name: epel           ,description: 'EL 7 EPEL'         ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://download.fedoraproject.org/pub/epel/$releasever/$basearch/'            ,china: 'https://mirrors.tuna.tsinghua.edu.cn/epel/$releasever/$basearch/'                ,europe: 'https://mirrors.xtom.de/epel/$releasever/$basearch/'                }}
  - { name: centos-sclo    ,description: 'EL 7 SCLo'         ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://mirror.centos.org/centos/$releasever/sclo/$basearch/sclo/'             ,china: 'https://mirrors.aliyun.com/centos/$releasever/sclo/$basearch/sclo/'              ,europe: 'https://mirrors.xtom.de/centos/$releasever/sclo/$basearch/sclo/'    }}
  - { name: centos-sclo-rh ,description: 'EL 7 SCLo rh'      ,module: node  ,releases: [7    ] ,baseurl: { default: 'http://mirror.centos.org/centos/$releasever/sclo/$basearch/rh/'               ,china: 'https://mirrors.aliyun.com/centos/$releasever/sclo/$basearch/rh/'                ,europe: 'https://mirrors.xtom.de/centos/$releasever/sclo/$basearch/rh/'      }}
  - { name: baseos         ,description: 'EL 8+ BaseOS'      ,module: node  ,releases: [  8,9] ,baseurl: { default: 'https://dl.rockylinux.org/pub/rocky/$releasever/BaseOS/$basearch/os/'         ,china: 'https://mirrors.aliyun.com/rockylinux/$releasever/BaseOS/$basearch/os/'          ,europe: 'https://mirrors.xtom.de/rocky/$releasever/BaseOS/$basearch/os/'     }}
  - { name: appstream      ,description: 'EL 8+ AppStream'   ,module: node  ,releases: [  8,9] ,baseurl: { default: 'https://dl.rockylinux.org/pub/rocky/$releasever/AppStream/$basearch/os/'      ,china: 'https://mirrors.aliyun.com/rockylinux/$releasever/AppStream/$basearch/os/'       ,europe: 'https://mirrors.xtom.de/rocky/$releasever/AppStream/$basearch/os/'  }}
  - { name: extras         ,description: 'EL 8+ Extras'      ,module: node  ,releases: [  8,9] ,baseurl: { default: 'https://dl.rockylinux.org/pub/rocky/$releasever/extras/$basearch/os/'         ,china: 'https://mirrors.aliyun.com/rockylinux/$releasever/extras/$basearch/os/'          ,europe: 'https://mirrors.xtom.de/rocky/$releasever/extras/$basearch/os/'     }}
  - { name: crb            ,description: 'EL 9 CRB'          ,module: node  ,releases: [    9] ,baseurl: { default: 'https://dl.rockylinux.org/pub/rocky/$releasever/CRB/$basearch/os/'            ,china: 'https://mirrors.aliyun.com/rockylinux/$releasever/CRB/$basearch/os/'             ,europe: 'https://mirrors.xtom.de/rocky/$releasever/CRB/$basearch/os/'        }}
  - { name: powertools     ,description: 'EL 8 PowerTools'   ,module: node  ,releases: [  8  ] ,baseurl: { default: 'https://dl.rockylinux.org/pub/rocky/$releasever/PowerTools/$basearch/os/'     ,china: 'https://mirrors.aliyun.com/rockylinux/$releasever/PowerTools/$basearch/os/'      ,europe: 'https://mirrors.xtom.de/rocky/$releasever/PowerTools/$basearch/os/' }}
  - { name: epel           ,description: 'EL 8+ EPEL'        ,module: node  ,releases: [  8,9] ,baseurl: { default: 'http://download.fedoraproject.org/pub/epel/$releasever/Everything/$basearch/' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/epel/$releasever/Everything/$basearch/'     ,europe: 'https://mirrors.xtom.de/epel/$releasever/Everything/$basearch/'     }}
  - { name: pgdg-common    ,description: 'PostgreSQL Common' ,module: pgsql ,releases: [7,8,9] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/common/redhat/rhel-$releasever-$basearch' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/common/redhat/rhel-$releasever-$basearch' , europe: 'https://mirrors.xtom.de/postgresql/repos/yum/common/redhat/rhel-$releasever-$basearch' }}
  - { name: pgdg-extras    ,description: 'PostgreSQL Extra'  ,module: pgsql ,releases: [7,8,9] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/common/pgdg-rhel$releasever-extras/redhat/rhel-$releasever-$basearch' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/common/pgdg-rhel$releasever-extras/redhat/rhel-$releasever-$basearch' , europe: 'https://mirrors.xtom.de/postgresql/repos/yum/common/pgdg-rhel$releasever-extras/redhat/rhel-$releasever-$basearch' }}
  - { name: pgdg-el8fix    ,description: 'PostgreSQL EL8FIX' ,module: pgsql ,releases: [  8  ] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/common/pgdg-centos8-sysupdates/redhat/rhel-8-x86_64/' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/common/pgdg-centos8-sysupdates/redhat/rhel-8-x86_64/' , europe: 'https://mirrors.xtom.de/postgresql/repos/yum/common/pgdg-centos8-sysupdates/redhat/rhel-8-x86_64/' } }
  - { name: pgdg-el9fix    ,description: 'PostgreSQL EL9FIX' ,module: pgsql ,releases: [    9] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/common/pgdg-rocky9-sysupdates/redhat/rhel-9-x86_64/'  ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/common/pgdg-rocky9-sysupdates/redhat/rhel-9-x86_64/' , europe: 'https://mirrors.xtom.de/postgresql/repos/yum/common/pgdg-rocky9-sysupdates/redhat/rhel-9-x86_64/' }}
  - { name: pgdg15         ,description: 'PostgreSQL 15'     ,module: pgsql ,releases: [7    ] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/15/redhat/rhel-$releasever-$basearch' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/15/redhat/rhel-$releasever-$basearch' ,europe: 'https://mirrors.xtom.de/postgresql/repos/yum/15/redhat/rhel-$releasever-$basearch' }}
  - { name: pgdg16         ,description: 'PostgreSQL 16'     ,module: pgsql ,releases: [  8,9] ,baseurl: { default: 'https://download.postgresql.org/pub/repos/yum/16/redhat/rhel-$releasever-$basearch' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/yum/16/redhat/rhel-$releasever-$basearch' ,europe: 'https://mirrors.xtom.de/postgresql/repos/yum/16/redhat/rhel-$releasever-$basearch' }}
  - { name: timescaledb    ,description: 'TimescaleDB'       ,module: pgsql ,releases: [7,8,9] ,baseurl: { default: 'https://packagecloud.io/timescale/timescaledb/el/$releasever/$basearch'  }}

For Debian (11,12) / Ubuntu (20.04,22.04) the proper value needs to be explicitly specified in global/cluster/host vars:

repo_upstream:                    # where to download
  - { name: pigsty-local  ,description: 'Pigsty Local'     ,module: local ,releases: [11,12,20,22] ,baseurl: { default: 'http://${admin_ip}/pigsty ./' }}
  - { name: pigsty-pgsql  ,description: 'Pigsty PgSQL'     ,module: pgsql ,releases: [11,12,20,22] ,baseurl: { default: 'https://repo.pigsty.io/deb/pgsql/${distro_codename}.amd64/ ./', china: 'https://repo.pigsty.cc/deb/pgsql/${distro_codename}.amd64/ ./' }}
  - { name: pigsty-infra  ,description: 'Pigsty Infra'     ,module: infra ,releases: [11,12,20,22] ,baseurl: { default: 'https://repo.pigsty.io/deb/infra/amd64/ ./', china: 'https://repo.pigsty.cc/deb/infra/amd64/ ./' }}
  - { name: nginx         ,description: 'Nginx'            ,module: infra ,releases: [11,12,20,22] ,baseurl: { default: 'http://nginx.org/packages/mainline/${distro_name} ${distro_codename} nginx' }}
  - { name: base          ,description: 'Debian Basic'     ,module: node  ,releases: [11,12      ] ,baseurl: { default: 'http://deb.debian.org/debian/ ${distro_codename} main non-free-firmware'         ,china: 'https://mirrors.aliyun.com/debian/ ${distro_codename} main restricted universe multiverse' }}
  - { name: updates       ,description: 'Debian Updates'   ,module: node  ,releases: [11,12      ] ,baseurl: { default: 'http://deb.debian.org/debian/ ${distro_codename}-updates main non-free-firmware' ,china: 'https://mirrors.aliyun.com/debian/ ${distro_codename}-updates main restricted universe multiverse' }}
  - { name: security      ,description: 'Debian Security'  ,module: node  ,releases: [11,12      ] ,baseurl: { default: 'http://security.debian.org/debian-security ${distro_codename}-security main non-free-firmware' }}
  - { name: base          ,description: 'Ubuntu Basic'     ,module: node  ,releases: [      20,22] ,baseurl: { default: 'https://mirrors.edge.kernel.org/${distro_name}/ ${distro_codename}   main universe multiverse restricted' ,china: 'https://mirrors.aliyun.com/${distro_name}/ ${distro_codename}   main restricted universe multiverse' }}
  - { name: updates       ,description: 'Ubuntu Updates'   ,module: node  ,releases: [      20,22] ,baseurl: { default: 'https://mirrors.edge.kernel.org/ubuntu/ ${distro_codename}-backports main restricted universe multiverse' ,china: 'https://mirrors.aliyun.com/ubuntu/ ${distro_codename}-updates   main restricted universe multiverse' }}
  - { name: backports     ,description: 'Ubuntu Backports' ,module: node  ,releases: [      20,22] ,baseurl: { default: 'https://mirrors.edge.kernel.org/ubuntu/ ${distro_codename}-security  main restricted universe multiverse' ,china: 'https://mirrors.aliyun.com/ubuntu/ ${distro_codename}-backports main restricted universe multiverse' }}
  - { name: security      ,description: 'Ubuntu Security'  ,module: node  ,releases: [      20,22] ,baseurl: { default: 'https://mirrors.edge.kernel.org/ubuntu/ ${distro_codename}-updates   main restricted universe multiverse' ,china: 'https://mirrors.aliyun.com/ubuntu/ ${distro_codename}-security  main restricted universe multiverse' }}
  - { name: pgdg          ,description: 'PGDG'             ,module: pgsql ,releases: [11,12,20,22] ,baseurl: { default: 'http://apt.postgresql.org/pub/repos/apt/ ${distro_codename}-pgdg main' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/postgresql/repos/apt/ ${distro_codename}-pgdg main' }}
  - { name: citus         ,description: 'Citus'            ,module: pgsql ,releases: [11,12,20,22] ,baseurl: { default: 'https://packagecloud.io/citusdata/community/${distro_name}/ ${distro_codename} main'   }}
  - { name: timescaledb   ,description: 'Timescaledb'      ,module: pgsql ,releases: [11,12,20,22] ,baseurl: { default: 'https://packagecloud.io/timescale/timescaledb/${distro_name}/ ${distro_codename} main' }}
  - { name: redis         ,description: 'Redis'            ,module: redis ,releases: [11,12,20,22] ,baseurl: { default: 'https://packages.redis.io/deb ${distro_codename} main' }}
  - { name: docker-ce     ,description: 'Docker'           ,module: infra ,releases: [11,12,20,22] ,baseurl: { default: 'https://download.docker.com/linux/${distro_name} ${distro_codename} stable' ,china: 'https://mirrors.tuna.tsinghua.edu.cn/docker-ce/linux//${distro_name} ${distro_codename} stable' }}

Pigsty build.yml will have the default value for each OS.

`repo_packages`

which packages to be included, default values:

repo_packages:
  - ansible python3 python3-pip python3-virtualenv python3-requests python3-jmespath python3.11-jmespath python3.11-pip dnf-utils modulemd-tools createrepo_c sshpass # Distro & Boot
  - nginx dnsmasq etcd haproxy vip-manager pg_exporter pgbackrest_exporter                                                                                            # Pigsty Addons
  - grafana loki logcli promtail prometheus2 alertmanager pushgateway node_exporter blackbox_exporter nginx_exporter keepalived_exporter                              # Infra Packages
  - lz4 unzip bzip2 zlib yum pv jq git ncdu make patch bash lsof wget uuid tuned nvme-cli numactl grubby sysstat iotop htop rsync tcpdump perf flamegraph             # Node Tools 1
  - netcat socat ftp lrzsz net-tools ipvsadm bind-utils telnet audit ca-certificates openssl openssh-clients readline vim-minimal keepalived chrony                   # Node Tools 2
  - patroni patroni-etcd pgbouncer pgbadger pgbackrest pgloader pg_activity pg_filedump timescaledb-tools scws libduckdb pgFormatter # pgxnclient missing in el9      # PGSQL Common Tools
  - postgresql16* pg_repack_16* wal2json_16* passwordcheck_cracklib_16* pglogical_16* pg_cron_16* postgis34_16* timescaledb-2-postgresql-16* pgvector_16* citus_16*   # PGDG 16 Packages
  - pgml_16* pg_graphql_16 pg_net_16* pgsql-http_16* pgsql-gzip_16* vault_16 pgjwt_16 pg_tle_16* pg_roaringbitmap_16* pointcloud_16* zhparser_16* hydra_16* apache-age_16* duckdb_fdw_16* pg_sparse_16* pg_sparse_16* pg_bm25_16* pg_analytics_16*
  - orafce_16* mongo_fdw_16* tds_fdw_16* mysql_fdw_16 hdfs_fdw_16 sqlite_fdw_16 pgbouncer_fdw_16 powa_16* pg_stat_kcache_16* pg_stat_monitor_16* pg_qualstats_16 pg_track_settings_16 pg_wait_sampling_16 hll_16 pgaudit_16
  - plprofiler_16* plsh_16* pldebugger_16 plpgsql_check_16* pgtt_16 pgq_16* pgsql_tweaks_16 count_distinct_16 hypopg_16 timestamp9_16* semver_16* prefix_16* periods_16 ip4r_16 tdigest_16 pgmp_16 extra_window_functions_16 topn_16
  - pg_background_16 e-maj_16 pg_prioritize_16 pgcryptokey_16 logerrors_16 pg_top_16 pg_comparator_16 pg_ivm_16* pgsodium_16* pgfincore_16* ddlx_16 credcheck_16 safeupdate_16 pg_squeeze_16* pg_fkpart_16 pg_jobmon_16
  - pg_partman_16 pg_permissions_16 pgexportdoc_16 pgimportdoc_16 pg_statement_rollback_16* pg_hint_plan_16* pg_auth_mon_16 pg_checksums_16 pg_failover_slots_16 pg_readonly_16* pg_uuidv7_16* set_user_16* rum_16
  - redis_exporter mysqld_exporter mongodb_exporter docker-ce docker-compose-plugin redis minio mcli ferretdb duckdb sealos  # Miscellaneous Packages
  #- mysqlcompat_16 system_stats_16 multicorn2_16* plproxy_16 geoip_16 pgcopydb_16 pg_catcheck_16 pg_store_plans_16* postgresql-unit_16 # not available for PG 16 yet

Each line is a set of package names separated by spaces, where the specified software will be downloaded via repotrack.

EL7 packages is slightly different, here are some ad hoc packages:

EL7: python36-requests python36-idna yum-utils yum-utils, and postgis33
EL8: python3.11-jmespath dnf-utils modulemd-tools, and postgis34
EL9: Same as EL8, Missing pgxnclient yet, add python3-jmespath

For debian/ubuntu, the proper value needs to be explicitly specified in global/cluster/host vars:

repo_packages:                    # which packages to be included
  - ansible python3 python3-pip python3-venv python3-jmespath dpkg-dev sshpass                                                                        # Distro & Boot
  - nginx dnsmasq etcd haproxy vip-manager pg-exporter pgbackrest-exporter                                                                            # Pigsty Addon
  - grafana loki logcli promtail prometheus2 alertmanager pushgateway node-exporter blackbox-exporter nginx-exporter keepalived-exporter              # Infra Packages
  - redis-exporter mysqld-exporter mongodb-exporter docker-ce docker-compose-plugin redis minio mcli ferretdb duckdb sealos                           # Miscellaneous
  - lz4 unzip bzip2 zlib1g pv jq git ncdu make patch bash lsof wget uuid tuned nvme-cli numactl sysstat iotop htop rsync tcpdump linux-tools-generic  # Node Tools 1
  - netcat socat ftp lrzsz net-tools ipvsadm dnsutils telnet ca-certificates openssl openssh-client libreadline-dev vim-tiny keepalived acl chrony    # Node Tools 2
  - patroni pgbouncer pgbackrest pgbadger pgloader pg-activity pgloader pg-activity postgresql-filedump pgxnclient pgformatter                        # PGSQL Packages
  - postgresql-client-16 postgresql-16 postgresql-server-dev-16 postgresql-plpython3-16 postgresql-plperl-16 postgresql-pltcl-16 postgresql-16-wal2json postgresql-16-repack
  - postgresql-16-postgis-3 postgresql-16-postgis-3-scripts postgresql-16-citus-12.1 postgresql-16-pgvector timescaledb-2-postgresql-16               # PGDG 16 Extensions
  - postgresql-16-age postgresql-16-asn1oid postgresql-16-auto-failover postgresql-16-bgw-replstatus postgresql-16-pg-catcheck postgresql-16-pg-checksums postgresql-16-credcheck postgresql-16-cron postgresql-16-debversion postgresql-16-decoderbufs postgresql-16-dirtyread postgresql-16-extra-window-functions postgresql-16-first-last-agg postgresql-16-hll postgresql-16-hypopg postgresql-16-icu-ext postgresql-16-ip4r postgresql-16-jsquery
  - postgresql-16-londiste-sql postgresql-16-mimeo postgresql-16-mysql-fdw postgresql-16-numeral postgresql-16-ogr-fdw postgresql-16-omnidb postgresql-16-oracle-fdw postgresql-16-orafce postgresql-16-partman postgresql-16-periods postgresql-16-pgaudit postgresql-16-pgauditlogtofile postgresql-16-pgextwlist postgresql-16-pg-fact-loader postgresql-16-pg-failover-slots postgresql-16-pgfincore postgresql-16-pgl-ddl-deploy postgresql-16-pglogical postgresql-16-pglogical-ticker
  - postgresql-16-pgmemcache postgresql-16-pgmp postgresql-16-pgpcre postgresql-16-pgq3 postgresql-16-pgq-node postgresql-16-pg-qualstats postgresql-16-pgsphere postgresql-16-pg-stat-kcache postgresql-16-pgtap postgresql-16-pg-track-settings postgresql-16-pg-wait-sampling postgresql-16-pldebugger postgresql-16-pllua postgresql-16-plpgsql-check postgresql-16-plprofiler postgresql-16-plproxy postgresql-16-plsh postgresql-16-pointcloud
  - postgresql-16-powa postgresql-16-prefix postgresql-16-preprepare postgresql-16-prioritize postgresql-16-q3c postgresql-16-rational postgresql-16-rum postgresql-16-semver postgresql-16-set-user postgresql-16-show-plans postgresql-16-similarity postgresql-16-snakeoil postgresql-16-squeeze postgresql-16-tablelog postgresql-16-tdigest postgresql-16-tds-fdw postgresql-16-toastinfo postgresql-16-topn postgresql-16-unit
  - pg-graphql pg-net pg-analytics pg-bm25 pg-sparse
  #- postgresql-16-pljava postgresql-16-plr postgresql-16-rdkit postgresql-16-pgrouting-doc postgresql-16-pgrouting postgresql-16-pgrouting-scripts postgresql-16-h3 postgresql-16-pgdg-pgroonga postgresql-16-pgpool2 postgresql-16-slony1-2 postgresql-16-repmgr

There are some differences between Ubuntu / Debian too:

Ubuntu 22.04: postgresql-pgml-15, postgresql-15-rdkit, linux-tools-generic(perf), netcat, ftp
Ubuntu 20.04: postgresql-15-rdkit not available. postgresql-15-postgis-3 must be installed online (without local repo)
Debian 12: netcat -> netcat-openbsd，ftp -> tnftp，linux-tools-generic(perf) -> linux-perf, the rest is same as Ubuntu
Debian 11: Same as Debian 12, except for postgresql-15-rdkit not available

Each line is a set of package names separated by spaces, where the specified software and their dependencies will be downloaded via repotrack or apt download accordingly.

Pigsty build.yml will have the default value for each OS.

`repo_url_packages`

extra packages from url, default values:

repo_url_packages:
  - https://repo.pigsty.cc/etc/pev.html     # postgres explain visualizer
  - https://repo.pigsty.cc/etc/chart.tgz    # grafana extra map geojson data
  - https://repo.pigsty.cc/etc/plugins.tgz  # grafana plugins

These are optional add-ons, which will be downloaded via URL from the Internet directly.

For example, if you don’t download the plugins.tgz, Pigsty will download it later during grafana setup.

`INFRA_PACKAGE`

These packages are installed on infra nodes only, including common rpm/deb/pip packages.

`infra_packages`

packages to be installed on infra nodes, default value:

infra_packages:                   # packages to be installed on infra nodes
  - grafana,loki,logcli,promtail,prometheus2,alertmanager,pushgateway
  - node_exporter,blackbox_exporter,nginx_exporter,pg_exporter
  - nginx,dnsmasq,ansible,etcd,python3-requests,redis,mcli

Default value for Debian/Ubuntu should be explicitly overwrite:

infra_packages:                   # packages to be installed on infra nodes
  - grafana,loki,logcli,promtail,prometheus2,alertmanager,pushgateway,blackbox-exporter
  - node-exporter,blackbox-exporter,nginx-exporter,redis-exporter,pg-exporter
  - nginx,dnsmasq,ansible,etcd,python3-requests,redis,mcli

`infra_packages_pip`

pip installed packages for infra nodes, default value is empty string

`NGINX`

Pigsty exposes all Web services through Nginx: Home Page, Grafana, Prometheus, AlertManager, etc…, and other optional tools such as PGWe, Jupyter Lab, Pgadmin, Bytebase ,and other static resource & report such as pev, schemaspy & pgbadger

This nginx also serves as a local yum/apt repo.

nginx_enabled: true               # enable nginx on this infra node?
nginx_exporter_enabled: true      # enable nginx_exporter on this infra node?
nginx_sslmode: enable             # nginx ssl mode? disable,enable,enforce
nginx_home: /www                  # nginx content dir, `/www` by default
nginx_port: 80                    # nginx listen port, 80 by default
nginx_ssl_port: 443               # nginx ssl listen port, 443 by default
nginx_navbar:                     # nginx index page navigation links
  - { name: CA Cert ,url: '/ca.crt'   ,desc: 'pigsty self-signed ca.crt'   }
  - { name: Package ,url: '/pigsty'   ,desc: 'local yum repo packages'     }
  - { name: PG Logs ,url: '/logs'     ,desc: 'postgres raw csv logs'       }
  - { name: Reports ,url: '/report'   ,desc: 'pgbadger summary report'     }
  - { name: Explain ,url: '/pigsty/pev.html' ,desc: 'postgres explain visualizer' }

`nginx_enabled`

enable nginx on this infra node? default value: true

`nginx_exporter_enabled`

enable nginx_exporter on this infra node? default value: true.

set to false will disable /nginx health check stub too: If your nginx does not support /nginx stub, you can set this value to false to disable it.

`nginx_sslmode`

nginx ssl mode? which could be: disable, enable, enforce, the default value: enable

disable: listen on nginx_port and serve plain HTTP only
enable: also listen on nginx_ssl_port and serve HTTPS
enforce: all links will be rendered as https:// by default

`nginx_home`

nginx web server static content dir, /www by default

Nginx root directory which contains static resource and repo resource. It’s wise to set this value same as repo_home so that local repo content is automatically served.

`nginx_port`

nginx listen port which serves the HTTP requests, 80 by default.

If your default 80 port is occupied or unavailable, you can consider using another port, and change repo_endpoint and repo_upstream (the local entry) accordingly.

`nginx_ssl_port`

nginx ssl listen port, 443 by default

`nginx_navbar`

nginx index page navigation links

default value:

nginx_navbar:                     # nginx index page navigation links
  - { name: CA Cert ,url: '/ca.crt'   ,desc: 'pigsty self-signed ca.crt'   }
  - { name: Package ,url: '/pigsty'   ,desc: 'local yum repo packages'     }
  - { name: PG Logs ,url: '/logs'     ,desc: 'postgres raw csv logs'       }
  - { name: Reports ,url: '/report'   ,desc: 'pgbadger summary report'     }
  - { name: Explain ,url: '/pigsty/pev.html' ,desc: 'postgres explain visualizer' }

Each record is rendered as a navigation link to the Pigsty home page App drop-down menu, and the apps are all optional, mounted by default on the Pigsty default server under http://pigsty/.

The url parameter specifies the URL PATH for the app, with the exception that if the ${grafana} string is present in the URL, it will be automatically replaced with the Grafana domain name defined in infra_portal.

`DNS`

Pigsty will launch a default DNSMASQ server on infra nodes to serve DNS inquiry. such as h.pigsty a.pigsty p.pigsty g.pigsty and sss.pigsty for optional MinIO service.

All records will be added to infra node’s /etc/hosts.d/*.

You have to add nameserver {{ admin_ip }} to your /etc/resolv to use this dns server, and node_dns_servers will do the trick.

dns_enabled: true                 # setup dnsmasq on this infra node?
dns_port: 53                      # dns server listen port, 53 by default
dns_records:                      # dynamic dns records resolved by dnsmasq
  - "${admin_ip} h.pigsty a.pigsty p.pigsty g.pigsty"
  - "${admin_ip} api.pigsty adm.pigsty cli.pigsty ddl.pigsty lab.pigsty git.pigsty sss.pigsty wiki.pigsty"

`dns_enabled`

setup dnsmasq on this infra node? default value: true

If you don’t want to use the default DNS server, you can set this value to false to disable it. And use node_default_etc_hosts and node_etc_hosts instead.

`dns_port`

dns server listen port, 53 by default

`dns_records`

dynamic dns records resolved by dnsmasq, Some auxiliary domain names will be written to /etc/hosts.d/default on infra nodes by default

dns_records:                      # dynamic dns records resolved by dnsmasq
  - "${admin_ip} h.pigsty a.pigsty p.pigsty g.pigsty"
  - "${admin_ip} api.pigsty adm.pigsty cli.pigsty ddl.pigsty lab.pigsty git.pigsty sss.pigsty wiki.pigsty"

`PROMETHEUS`

Prometheus is used as time-series database for metrics scrape, storage & analysis.

prometheus_enabled: true          # enable prometheus on this infra node?
prometheus_clean: true            # clean prometheus data during init?
prometheus_data: /data/prometheus # prometheus data dir, `/data/prometheus` by default
prometheus_sd_interval: 5s        # prometheus target refresh interval, 5s by default
prometheus_scrape_interval: 10s   # prometheus scrape & eval interval, 10s by default
prometheus_scrape_timeout: 8s     # prometheus global scrape timeout, 8s by default
prometheus_options: '--storage.tsdb.retention.time=15d' # prometheus extra server options
pushgateway_enabled: true         # setup pushgateway on this infra node?
pushgateway_options: '--persistence.interval=1m' # pushgateway extra server options
blackbox_enabled: true            # setup blackbox_exporter on this infra node?
blackbox_options: ''              # blackbox_exporter extra server options
alertmanager_enabled: true        # setup alertmanager on this infra node?
alertmanager_options: ''          # alertmanager extra server options
exporter_metrics_path: /metrics   # exporter metric path, `/metrics` by default
exporter_install: none            # how to install exporter? none,yum,binary
exporter_repo_url: ''             # exporter repo file url if install exporter via yum

`prometheus_enabled`

enable prometheus on this infra node?

default value: true

`prometheus_clean`

clean prometheus data during init? default value: true

`prometheus_data`

prometheus data dir, /data/prometheus by default

`prometheus_sd_interval`

prometheus target refresh interval, 5s by default

`prometheus_scrape_interval`

prometheus scrape & eval interval, 10s by default

`prometheus_scrape_timeout`

prometheus global scrape timeout, 8s by default

DO NOT set this larger than prometheus_scrape_interval

`prometheus_options`

prometheus extra server options

default value: --storage.tsdb.retention.time=15d

Extra cli args for prometheus server, the default value will set up a 15-day data retention to limit disk usage.

`pushgateway_enabled`

setup pushgateway on this infra node? default value: true

`pushgateway_options`

pushgateway extra server options, default value: --persistence.interval=1m

`blackbox_enabled`

setup blackbox_exporter on this infra node? default value: true

`blackbox_options`

blackbox_exporter extra server options, default value is empty string

`alertmanager_enabled`

setup alertmanager on this infra node? default value: true

`alertmanager_options`

alertmanager extra server options, default value is empty string

`exporter_metrics_path`

exporter metric path, /metrics by default

`exporter_install`

(OBSOLETE) how to install exporter? none,yum,binary

default value: none

Specify how to install Exporter:

none: No installation, (by default, the Exporter has been previously installed by the node_pkg task)
yum: Install using yum (if yum installation is enabled, run yum to install node_exporter and pg_exporter before deploying Exporter)
binary: Install using a copy binary (copy node_exporter and pg_exporter binary directly from the meta node, not recommended)

When installing with yum, if exporter_repo_url is specified (not empty), the installation will first install the REPO file under that URL into /etc/yum.repos.d. This feature allows you to install Exporter directly without initializing the node infrastructure. It is not recommended for regular users to use binary installation. This mode is usually used for emergency troubleshooting and temporary problem fixes.

<meta>:<pigsty>/files/node_exporter ->  <target>:/usr/bin/node_exporter
<meta>:<pigsty>/files/pg_exporter   ->  <target>:/usr/bin/pg_exporter

`exporter_repo_url`

(OBSOLETE) exporter repo file url if install exporter via yum

default value is empty string

Default is empty; when exporter_install is yum, the repo specified by this parameter will be added to the node source list.

`GRAFANA`

Grafana is the visualization platform for Pigsty’s monitoring system.

It can also be used as a low code data visualization environment

grafana_enabled: true             # enable grafana on this infra node?
grafana_clean: true               # clean grafana data during init?
grafana_admin_username: admin     # grafana admin username, `admin` by default
grafana_admin_password: pigsty    # grafana admin password, `pigsty` by default
grafana_plugin_cache: /www/pigsty/plugins.tgz # path to grafana plugins cache tarball
grafana_plugin_list:              # grafana plugins to be downloaded with grafana-cli
  - volkovlabs-echarts-panel
  - volkovlabs-image-panel
  - volkovlabs-form-panel
  - volkovlabs-variable-panel
  - volkovlabs-grapi-datasource
  - marcusolsson-static-datasource
  - marcusolsson-json-datasource
  - marcusolsson-dynamictext-panel
  - marcusolsson-treemap-panel
  - marcusolsson-calendar-panel
  - marcusolsson-hourly-heatmap-panel
  - knightss27-weathermap-panel
loki_enabled: true                # enable loki on this infra node?
loki_clean: false                 # whether remove existing loki data?
loki_data: /data/loki             # loki data dir, `/data/loki` by default
loki_retention: 15d               # loki log retention period, 15d by default

`grafana_enabled`

enable grafana on this infra node? default value: true

`grafana_clean`

clean grafana data during init? default value: true

`grafana_admin_username`

grafana admin username, admin by default

`grafana_admin_password`

grafana admin password, pigsty by default

default value: pigsty

WARNING: Change this to a strong password before deploying to production environment

`grafana_plugin_cache`

path to grafana plugins cache tarball

default value: /www/pigsty/plugins.tgz

If that cache exists, pigsty use that instead of downloading plugins from the Internet

`grafana_plugin_list`

grafana plugins to be downloaded with grafana-cli

default value:

grafana_plugin_list:              # grafana plugins to be downloaded with grafana-cli
  - volkovlabs-echarts-panel
  - volkovlabs-image-panel
  - volkovlabs-form-panel
  - volkovlabs-variable-panel
  - volkovlabs-grapi-datasource
  - marcusolsson-static-datasource
  - marcusolsson-json-datasource
  - marcusolsson-dynamictext-panel
  - marcusolsson-treemap-panel
  - marcusolsson-calendar-panel
  - marcusolsson-hourly-heatmap-panel
  - knightss27-weathermap-panel

`LOKI`

`loki_enabled`

enable loki on this infra node? default value: true

`loki_clean`

whether remove existing loki data? default value: false

`loki_data`

loki data dir, default value: /data/loki

`loki_retention`

loki log retention period, 15d by default

`NODE`

Node module are tuning target nodes into desired state and take it into the Pigsty monitor system.

`NODE_ID`

Each node has identity parameters that are configured through the parameters in <cluster>.hosts and <cluster>.vars. Check NODE Identity for details.

`nodename`

node instance identity, use hostname if missing, optional

no default value, Null or empty string means nodename will be set to node’s current hostname.

If node_id_from_pg is true (by default) and nodename is not explicitly defined, nodename will try to use ${pg_cluster}-${pg_seq} first, if PGSQL is not defined on this node, it will fall back to default HOSTNAME.

If nodename_overwrite is true, the node name will also be used as the HOSTNAME.

`node_cluster`

node cluster identity, use ’nodes’ if missing, optional

default values: nodes

If node_id_from_pg is true (by default) and node_cluster is not explicitly defined, node_cluster will try to use ${pg_cluster} first, if PGSQL is not defined on this node, it will fall back to default HOSTNAME.

`nodename_overwrite`

overwrite node’s hostname with nodename?

default value is true, a non-empty node name nodename will override the hostname of the current node.

When the nodename parameter is undefined or an empty string, but node_id_from_pg is true, the node name will try to use {{ pg_cluster }}-{{ pg_seq }}, borrow identity from the 1:1 PostgreSQL Instance’s ins name.

No changes are made to the hostname if the nodename is undefined, empty, or an empty string and node_id_from_pg is false.

`nodename_exchange`

exchange nodename among play hosts?

default value is false

When this parameter is enabled, node names are exchanged between the same group of nodes executing the node.yml playbook, written to /etc/hosts.

`node_id_from_pg`

use postgres identity as node identity if applicable?

default value is true

Boworrow PostgreSQL cluster & instance identity if application.

It’s useful to use same identity for postgres & node if there’s a 1:1 relationship

`NODE_DNS`

Pigsty configs static DNS records and dynamic DNS resolver for nodes.

If you already have a DNS server, set node_dns_method to none to disable dynamic DNS setup.

node_write_etc_hosts: true        # modify `/etc/hosts` on target node?
node_default_etc_hosts:           # static dns records in `/etc/hosts`
  - "${admin_ip} h.pigsty a.pigsty p.pigsty g.pigsty"
node_etc_hosts: []                # extra static dns records in `/etc/hosts`
node_dns_method: add              # how to handle dns servers: add,none,overwrite
node_dns_servers: ['${admin_ip}'] # dynamic nameserver in `/etc/resolv.conf`
node_dns_options:                 # dns resolv options in `/etc/resolv.conf`
  - options single-request-reopen timeout:1

node_write_etc_hosts

modify /etc/hosts on target node?

For example, the docker VM can not modify /etc/hosts by default, so you can set this value to false to disable the modification.

`node_default_etc_hosts`

static dns records in /etc/hosts

default value:

["${admin_ip} h.pigsty a.pigsty p.pigsty g.pigsty"]

node_default_etc_hosts is an array. Each element is a DNS record with format <ip> <name>.

It is used for global static DNS records. You can use node_etc_hosts for ad hoc records for each cluster.

Make sure to write a DNS record like 10.10.10.10 h.pigsty a.pigsty p.pigsty g.pigsty to /etc/hosts to ensure that the local yum repo can be accessed using the domain name before the DNS Nameserver starts.

`node_etc_hosts`

extra static dns records in /etc/hosts

default values: []

Same as node_default_etc_hosts, but in addition to it.

`node_dns_method`

how to handle dns servers: add,none,overwrite

default values: add

add: Append the records in node_dns_servers to /etc/resolv.conf and keep the existing DNS servers. (default)
overwrite: Overwrite /etc/resolv.conf with the record in node_dns_servers
none: If a DNS server is provided in the production env, the DNS server config can be skipped.

`node_dns_servers`

dynamic nameserver in /etc/resolv.conf

default values: ["${admin_ip}"] , the default nameserver on admin node will be added to /etc/resolv.conf as the first nameserver.

`node_dns_options`

dns resolv options in /etc/resolv.conf, default value:

- options single-request-reopen timeout:1

`NODE_PACKAGE`

This section is about upstream yum repos & packages to be installed.

node_repo_modules: local          # upstream repo to be added on node, local by default.
node_repo_remove: true            # remove existing repo on node?
node_packages: [ ]                # packages to be installed current nodes
node_default_packages:            # default packages to be installed on all nodes
  - lz4,unzip,bzip2,zlib,yum,pv,jq,git,ncdu,make,patch,bash,lsof,wget,uuid,tuned,nvme-cli,numactl,grubby,sysstat,iotop,htop,rsync,tcpdump,python3,python3-pip
  - netcat,socat,ftp,lrzsz,net-tools,ipvsadm,bind-utils,telnet,audit,ca-certificates,openssl,readline,vim-minimal,node_exporter,etcd,haproxy

For Ubuntu nodes, use this default value explicitly:

- lz4,unzip,bzip2,zlib1g,pv,jq,git,ncdu,make,patch,bash,lsof,wget,uuid,tuned,nvme-cli,numactl,sysstat,iotop,htop,rsync,tcpdump,chrony,acl,python3,python3-pip
- netcat,ftp,socat,lrzsz,net-tools,ipvsadm,dnsutils,telnet,ca-certificates,openssl,openssh-client,libreadline-dev,vim-tiny,keepalived,node-exporter,etcd,haproxy

For debian nodes, use this default value explicitly:

- lz4,unzip,bzip2,zlib1g,pv,jq,git,ncdu,make,patch,bash,lsof,wget,uuid,tuned,nvme-cli,numactl,sysstat,iotop,htop,rsync,tcpdump,chrony,acl,python3,python3-pip
- netcat-openbsd,tnftp,socat,lrzsz,net-tools,ipvsadm,dnsutils,telnet,ca-certificates,openssl,openssh-client,libreadline-dev,vim-tiny,keepalived,node-exporter,etcd,haproxy

`node_repo_modules`

upstream repo to be added on node, default value: local

This parameter specifies the upstream repo to be added to the node. It is used to filter the repo_upstream entries and only the entries with the same module value will be added to the node’s software source. Which is similar to the repo_modules parameter.

`node_repo_remove`

remove existing repo on node?

default value is true, and thus Pigsty will move existing repo file in /etc/yum.repos.d to a backup dir: /etc/yum.repos.d/backup before adding upstream repos On Debian/Ubuntu, Pigsty will backup & move /etc/apt/sources.list(.d) to /etc/apt/backup.

`node_packages`

packages to be installed current nodes, default values: []

Each element is a comma-separated list of package names, which will be installed on the current node in addition to node_default_packages

Like node_default_packages, but in addition to it. designed for overwriting in cluster/instance level.

`node_default_packages`

default packages to be installed on all nodes, the default value is for EL 7/8/9:

node_default_packages:            # default packages to be installed on all nodes
  - lz4,unzip,bzip2,zlib,yum,pv,jq,git,ncdu,make,patch,bash,lsof,wget,uuid,tuned,nvme-cli,numactl,grubby,sysstat,iotop,htop,rsync,tcpdump,chrony,python3
  - netcat,socat,ftp,lrzsz,net-tools,ipvsadm,bind-utils,telnet,audit,ca-certificates,openssl,readline,vim-minimal,node_exporter,etcd,haproxy,python3-pip

For Ubuntu, the appropriate default value would be:

- lz4,unzip,bzip2,zlib1g,pv,jq,git,ncdu,make,patch,bash,lsof,wget,uuid,tuned,linux-tools-generic,nvme-cli,numactl,sysstat,iotop,htop,rsync,tcpdump,chrony,acl,python3,python3-pip
- netcat,socat,ftp,lrzsz,net-tools,ipvsadm,dnsutils,telnet,ca-certificates,openssl,openssh-client,libreadline-dev,vim-tiny,keepalived,node-exporter,etcd,haproxy

For Debian, the appropriate default value would be:

- lz4,unzip,bzip2,zlib1g,pv,jq,git,ncdu,make,patch,bash,lsof,wget,uuid,tuned,linux-perf,nvme-cli,numactl,sysstat,iotop,htop,rsync,tcpdump,chrony,acl,python3,python3-pip
- netcat-openbsd,socat,tnftp,lrzsz,net-tools,ipvsadm,dnsutils,telnet,ca-certificates,openssl,openssh-client,libreadline-dev,vim-tiny,keepalived,node-exporter,etcd,haproxy

`NODE_TUNE`

Configure tuned templates, features, kernel modules, sysctl params on node.

node_disable_firewall: true       # disable node firewall? true by default
node_disable_selinux: true        # disable node selinux? true by default
node_disable_numa: false          # disable node numa, reboot required
node_disable_swap: false          # disable node swap, use with caution
node_static_network: true         # preserve dns resolver settings after reboot
node_disk_prefetch: false         # setup disk prefetch on HDD to increase performance
node_kernel_modules: [ softdog, br_netfilter, ip_vs, ip_vs_rr, ip_vs_wrr, ip_vs_sh ]
node_hugepage_count: 0            # number of 2MB hugepage, take precedence over ratio
node_hugepage_ratio: 0            # node mem hugepage ratio, 0 disable it by default
node_overcommit_ratio: 0          # node mem overcommit ratio, 0 disable it by default
node_tune: oltp                   # node tuned profile: none,oltp,olap,crit,tiny
node_sysctl_params: { }           # sysctl parameters in k:v format in addition to tuned

`node_disable_firewall`

disable node firewall? true by default

default value is true

`node_disable_selinux`

disable node selinux? true by default

default value is true

`node_disable_numa`

disable node numa, reboot required

default value is false

Boolean flag, default is not off. Note that turning off NUMA requires a reboot of the machine before it can take effect!

If you don’t know how to set the CPU affinity, it is recommended to turn off NUMA.

`node_disable_swap`

disable node swap, use with caution

default value is false

But turning off SWAP is not recommended. But SWAP should be disabled when your node is used for a Kubernetes deployment.

If there is enough memory and the database is deployed exclusively. it may slightly improve performance

`node_static_network`

preserve dns resolver settings after reboot, default value is true

Enabling static networking means that machine reboots will not overwrite your DNS Resolv config with NIC changes. It is recommended to enable it in production environment.

`node_disk_prefetch`

setup disk prefetch on HDD to increase performance

default value is false, Consider enable this when using HDD.

`node_kernel_modules`

kernel modules to be enabled on this node

default value:

node_kernel_modules: [ softdog, br_netfilter, ip_vs, ip_vs_rr, ip_vs_wrr, ip_vs_sh ]

An array consisting of kernel module names declaring the kernel modules that need to be installed on the node.

`node_hugepage_count`

number of 2MB hugepage, take precedence over ratio, 0 by default

Take precedence over node_hugepage_ratio. If a non-zero value is given, it will be written to /etc/sysctl.d/hugepage.conf

If node_hugepage_count and node_hugepage_ratio are both 0 (default), hugepage will be disabled at all.

Negative value will not work, and number higher than 90% node mem will be ceil to 90% of node mem.

It should slightly larger than pg_shared_buffer_ratio, if not zero.

`node_hugepage_ratio`

node mem hugepage ratio, 0 disable it by default, valid range: 0 ~ 0.40

default values: 0, which will set vm.nr_hugepages=0 and not use HugePage at all.

Percent of this memory will be allocated as HugePage, and reserved for PostgreSQL.

It should be equal or slightly larger than pg_shared_buffer_ratio, if not zero.

For example, if you have default 25% mem for postgres shard buffers, you can set this value to 27 ~ 30. Wasted hugepage can be reclaimed later with /pg/bin/pg-tune-hugepage

`node_overcommit_ratio`

node mem overcommit ratio, 0 disable it by default. this is an integer from 0 to 100+ .

default values: 0, which will set vm.overcommit_memory=0, otherwise vm.overcommit_memory=2 will be used, and this value will be used as vm.overcommit_ratio.

It is recommended to set use a vm.overcommit_ratio on dedicated pgsql nodes. e.g. 50 ~ 100.

`node_tune`

node tuned profile: none,oltp,olap,crit,tiny

default values: oltp

tiny: Micro Virtual Machine (1 ~ 3 Core, 1 ~ 8 GB Mem)
oltp: Regular OLTP templates with optimized latency
olap : Regular OLAP templates to optimize throughput
crit: Core financial business templates, optimizing the number of dirty pages

Usually, the database tuning template pg_conf should be paired with the node tuning template: node_tune

`node_sysctl_params`

sysctl parameters in k:v format in addition to tuned

default values: {}

Dictionary K-V structure, Key is kernel sysctl parameter name, Value is the parameter value.

You can also define sysctl parameters with tuned profile

`NODE_ADMIN`

This section is about admin users and it’s credentials.

node_data: /data                  # node main data directory, `/data` by default
node_admin_enabled: true          # create a admin user on target node?
node_admin_uid: 88                # uid and gid for node admin user
node_admin_username: dba          # name of node admin user, `dba` by default
node_admin_ssh_exchange: true     # exchange admin ssh key among node cluster
node_admin_pk_current: true       # add current user's ssh pk to admin authorized_keys
node_admin_pk_list: []            # ssh public keys to be added to admin user

`node_data`

node main data directory, /data by default

default values: /data

If specified, this path will be used as major data disk mountpoint. And a dir will be created and throwing a warning if path not exists.

The data dir is owned by root with mode 0777.

`node_admin_enabled`

create a admin user on target node?

default value is true

Create an admin user on each node (password-free sudo and ssh), an admin user named dba (uid=88) will be created by default, which can access other nodes in the env and perform sudo from the meta node via SSH password-free.

`node_admin_uid`

uid and gid for node admin user

default values: 88

`node_admin_username`

name of node admin user, dba by default

default values: dba

`node_admin_ssh_exchange`

exchange admin ssh key among node cluster

default value is true

When enabled, Pigsty will exchange SSH public keys between members during playbook execution, allowing admins node_admin_username to access each other from different nodes.

`node_admin_pk_current`

add current user’s ssh pk to admin authorized_keys

default value is true

When enabled, on the current node, the SSH public key (~/.ssh/id_rsa.pub) of the current user is copied to the authorized_keys of the target node admin user.

When deploying in a production env, be sure to pay attention to this parameter, which installs the default public key of the user currently executing the command to the admin user of all machines.

`node_admin_pk_list`

ssh public keys to be added to admin user

default values: []

Each element of the array is a string containing the key written to the admin user ~/.ssh/authorized_keys, and the user with the corresponding private key can log in as an admin user.

When deploying in production envs, be sure to note this parameter and add only trusted keys to this list.

`NODE_TIME`

node_timezone: ''                 # setup node timezone, empty string to skip
node_ntp_enabled: true            # enable chronyd time sync service?
node_ntp_servers:                 # ntp servers in `/etc/chrony.conf`
  - pool pool.ntp.org iburst
node_crontab_overwrite: true      # overwrite or append to `/etc/crontab`?
node_crontab: [ ]                 # crontab entries in `/etc/crontab`

`node_timezone`

setup node timezone, empty string to skip

default value is empty string, which will not change the default timezone (usually UTC)

`node_ntp_enabled`

enable chronyd time sync service?

default value is true, and thus Pigsty will override the node’s /etc/chrony.conf by with node_ntp_servers.

If you already a NTP server configured, just set to false to leave it be.

`node_ntp_servers`

ntp servers in /etc/chrony.conf, default value: ["pool pool.ntp.org iburst"]

It only takes effect if node_ntp_enabled is true.

You can use ${admin_ip} to sync time with ntp server on admin node rather than public ntp server.

node_ntp_servers: [ 'pool ${admin_ip} iburst' ]

`node_crontab_overwrite`

overwrite or append to /etc/crontab?

default value is true, and pigsty will render records in node_crontab in overwrite mode rather than appending to it.

`node_crontab`

crontab entries in /etc/crontab

default values: []

`NODE_VIP`

You can bind an optional L2 VIP among one node cluster, which is disabled by default.

L2 VIP can only be used in same L2 LAN, which may incurs extra restrictions on your network topology.

If enabled, You have to manually assign the vip_address and vip_vrid for each node cluster.

It is user’s responsibility to ensure that the address / vrid is unique among the same LAN.

vip_enabled: false                # enable vip on this node cluster?
# vip_address:         [IDENTITY] # node vip address in ipv4 format, required if vip is enabled
# vip_vrid:            [IDENTITY] # required, integer, 1-254, should be unique among same VLAN
vip_role: backup                  # optional, `master/backup`, backup by default, use as init role
vip_preempt: false                # optional, `true/false`, false by default, enable vip preemption
vip_interface: eth0               # node vip network interface to listen, `eth0` by default
vip_dns_suffix: ''                # node vip dns name suffix, empty string by default
vip_exporter_port: 9650           # keepalived exporter listen port, 9650 by default

`vip_enabled`

enable vip on this node cluster? default value is false, means no L2 VIP is created for this node cluster.

L2 VIP can only be used in same L2 LAN, which may incurs extra restrictions on your network topology.

`vip_address`

node vip address in IPv4 format, required if node vip_enabled.

no default value. This parameter must be explicitly assigned and unique in your LAN.

`vip_vrid`

integer, 1-254, should be unique in same VLAN, required if node vip_enabled.

no default value. This parameter must be explicitly assigned and unique in your LAN.

`vip_role`

node vip role, could be master or backup, will be used as initial keepalived state.

`vip_preempt`

optional, true/false, false by default, enable vip preemption

default value is false, means no preempt is happening when a backup have higher priority than living master.

`vip_interface`

node vip network interface to listen, eth0 by default.

It should be the same primary intranet interface of your node, which is the IP address you used in the inventory file.

If your node have different interface, you can override it on instance vars

`vip_dns_suffix`

node vip dns name suffix, empty string by default. It will be used as the DNS name of the node VIP.

`vip_exporter_port`

keepalived exporter listen port, 9650 by default.

`HAPROXY`

HAProxy is installed on every node by default, exposing services in a NodePort manner.

It is used by PGSQL Service.

haproxy_enabled: true             # enable haproxy on this node?
haproxy_clean: false              # cleanup all existing haproxy config?
haproxy_reload: true              # reload haproxy after config?
haproxy_auth_enabled: true        # enable authentication for haproxy admin page
haproxy_admin_username: admin     # haproxy admin username, `admin` by default
haproxy_admin_password: pigsty    # haproxy admin password, `pigsty` by default
haproxy_exporter_port: 9101       # haproxy admin/exporter port, 9101 by default
haproxy_client_timeout: 24h       # client side connection timeout, 24h by default
haproxy_server_timeout: 24h       # server side connection timeout, 24h by default
haproxy_services: []              # list of haproxy service to be exposed on node

`haproxy_enabled`

enable haproxy on this node?

default value is true

`haproxy_clean`

cleanup all existing haproxy config?

default value is false

`haproxy_reload`

reload haproxy after config?

default value is true, it will reload haproxy after config change.

If you wish to check before apply, you can turn off this with cli args and check it.

`haproxy_auth_enabled`

enable authentication for haproxy admin page

default value is true, which will require a http basic auth for admin page.

disable it is not recommended, since your traffic control will be exposed

`haproxy_admin_username`

haproxy admin username, admin by default

`haproxy_admin_password`

haproxy admin password, pigsty by default

PLEASE CHANGE IT IN YOUR PRODUCTION ENVIRONMENT!

`haproxy_exporter_port`

haproxy admin/exporter port, 9101 by default

`haproxy_client_timeout`

client side connection timeout, 24h by default

`haproxy_server_timeout`

server side connection timeout, 24h by default

`haproxy_services`

list of haproxy service to be exposed on node, default values: []

Each element is a service definition, here is an ad hoc haproxy service example:

haproxy_services:                   # list of haproxy service

  # expose pg-test read only replicas
  - name: pg-test-ro                # [REQUIRED] service name, unique
    port: 5440                      # [REQUIRED] service port, unique
    ip: "*"                         # [OPTIONAL] service listen addr, "*" by default
    protocol: tcp                   # [OPTIONAL] service protocol, 'tcp' by default
    balance: leastconn              # [OPTIONAL] load balance algorithm, roundrobin by default (or leastconn)
    maxconn: 20000                  # [OPTIONAL] max allowed front-end connection, 20000 by default
    default: 'inter 3s fastinter 1s downinter 5s rise 3 fall 3 on-marked-down shutdown-sessions slowstart 30s maxconn 3000 maxqueue 128 weight 100'
    options:
      - option httpchk
      - option http-keep-alive
      - http-check send meth OPTIONS uri /read-only
      - http-check expect status 200
    servers:
      - { name: pg-test-1 ,ip: 10.10.10.11 , port: 5432 , options: check port 8008 , backup: true }
      - { name: pg-test-2 ,ip: 10.10.10.12 , port: 5432 , options: check port 8008 }
      - { name: pg-test-3 ,ip: 10.10.10.13 , port: 5432 , options: check port 8008 }

It will be rendered to /etc/haproxy/<service.name>.cfg and take effect after reload.

`NODE_EXPORTER`

node_exporter_enabled: true       # setup node_exporter on this node?
node_exporter_port: 9100          # node exporter listen port, 9100 by default
node_exporter_options: '--no-collector.softnet --no-collector.nvme --collector.tcpstat --collector.processes'

`node_exporter_enabled`

setup node_exporter on this node? default value is true

`node_exporter_port`

node exporter listen port, 9100 by default

`node_exporter_options`

extra server options for node_exporter, default value: --no-collector.softnet --no-collector.nvme --collector.tcpstat --collector.processes

Pigsty enables tcpstat, processes collectors and and disable nvme, softnet metrics collectors by default.

`PROMTAIL`

Promtail will collect logs from other modules, and send them to LOKI

INFRA: Infra logs, collected only on infra nodes.
- nginx-access: /var/log/nginx/access.log
- nginx-error: /var/log/nginx/error.log
- grafana: /var/log/grafana/grafana.log
NODES: Host node logs, collected on all nodes.
- syslog: /var/log/messages
- dmesg: /var/log/dmesg
- cron: /var/log/cron
PGSQL: PostgreSQL logs, collected when a node is defined with pg_cluster.
- postgres: /pg/log/postgres/*.csv
- patroni: /pg/log/patroni.log
- pgbouncer: /pg/log/pgbouncer/pgbouncer.log
- pgbackrest: /pg/log/pgbackrest/*.log
REDIS: Redis logs, collected when a node is defined with redis_cluster.
- redis: /var/log/redis/*.log

Log directory are customizable according to pg_log_dir, patroni_log_dir, pgbouncer_log_dir, pgbackrest_log_dir

promtail_enabled: true            # enable promtail logging collector?
promtail_clean: false             # purge existing promtail status file during init?
promtail_port: 9080               # promtail listen port, 9080 by default
promtail_positions: /var/log/positions.yaml # promtail position status file path

`promtail_enabled`

enable promtail logging collector?

default value is true

`promtail_clean`

purge existing promtail status file during init?

default value is false, if you choose to clean, Pigsty will remove the existing state file defined by promtail_positions which means that Promtail will recollect all logs on the current node and send them to Loki again.

`promtail_port`

promtail listen port, 9080 by default

default values: 9080

`promtail_positions`

promtail position status file path

default values: /var/log/positions.yaml

Promtail records the consumption offsets of all logs, which are periodically written to the file specified by promtail_positions.

`DOCKER`

You can install docker on nodes with docker.yml

docker_enabled: false             # enable docker on this node?
docker_cgroups_driver: systemd    # docker cgroup fs driver: cgroupfs,systemd
docker_registry_mirrors: []       # docker registry mirror list
docker_image_cache: /tmp/docker   # docker image cache dir, `/tmp/docker` by default

`docker_enabled`

enable docker on this node? default value is false

`docker_cgroups_driver`

docker cgroup fs driver, could be cgroupfs or systemd, default values: systemd

`docker_registry_mirrors`

docker registry mirror list, default values: [], Example:

[ "https://mirror.ccs.tencentyun.com" ]         # tencent cloud mirror, intranet only
["https://registry.cn-hangzhou.aliyuncs.com"]   # aliyun cloud mirror, login required

`docker_image_cache`

docker image cache dir, /tmp/docker by default.

The local docker image cache with .tgz suffix under this directory will be loaded into docker one by one:

cat {{ docker_image_cache }}/*.tgz | gzip -d -c - | docker load

`ETCD`

ETCD is a distributed, reliable key-value store for the most critical data of a distributed system, and pigsty use etcd as DCS, Which is critical to PostgreSQL High-Availability.

Pigsty has a hard coded group name etcd for etcd cluster, it can be an existing & external etcd cluster, or a new etcd cluster created by Pigsty with etcd.yml.

#etcd_seq: 1                      # etcd instance identifier, explicitly required
#etcd_cluster: etcd               # etcd cluster & group name, etcd by default
etcd_safeguard: false             # prevent purging running etcd instance?
etcd_clean: true                  # purging existing etcd during initialization?
etcd_data: /data/etcd             # etcd data directory, /data/etcd by default
etcd_port: 2379                   # etcd client port, 2379 by default
etcd_peer_port: 2380              # etcd peer port, 2380 by default
etcd_init: new                    # etcd initial cluster state, new or existing
etcd_election_timeout: 1000       # etcd election timeout, 1000ms by default
etcd_heartbeat_interval: 100      # etcd heartbeat interval, 100ms by default

`etcd_seq`

etcd instance identifier, REQUIRED

no default value, you have to specify it explicitly. Here is a 3-node etcd cluster example:

etcd: # dcs service for postgres/patroni ha consensus
  hosts:  # 1 node for testing, 3 or 5 for production
    10.10.10.10: { etcd_seq: 1 }  # etcd_seq required
    10.10.10.11: { etcd_seq: 2 }  # assign from 1 ~ n
    10.10.10.12: { etcd_seq: 3 }  # odd number please
  vars: # cluster level parameter override roles/etcd
    etcd_cluster: etcd  # mark etcd cluster name etcd
    etcd_safeguard: false # safeguard against purging
    etcd_clean: true # purge etcd during init process

`etcd_cluster`

etcd cluster & group name, etcd by default

default values: etcd, which is a fixed group name, can be useful when you want to use deployed some extra etcd clusters

`etcd_safeguard`

prevent purging running etcd instance? default value is false

If enabled, running etcd instance will not be purged by etcd.yml playbook.

`etcd_clean`

purging existing etcd during initialization? default value is true

If enabled, running etcd instance will be purged by etcd.yml playbook, which makes the playbook fully idempotent.

But if etcd_safeguard is enabled, it will still abort on any running etcd instance.

`etcd_data`

etcd data directory, /data/etcd by default

`etcd_port`

etcd client port, 2379 by default

`etcd_peer_port`

etcd peer port, 2380 by default

`etcd_init`

etcd initial cluster state, new or existing

default values: new, which will create a standalone new etcd cluster.

The value existing is used when trying to add new member to existing etcd cluster.

`etcd_election_timeout`

etcd election timeout, 1000 (ms) by default

`etcd_heartbeat_interval`

etcd heartbeat interval, 100 (ms) by default

`MINIO`

Minio is a S3 compatible object storage service. Which is used as an optional central backup storage repo for PostgreSQL.

But you can use it for other purpose, such as storing large files, document, pictures & videos.

#minio_seq: 1                     # minio instance identifier, REQUIRED
minio_cluster: minio              # minio cluster name, minio by default
minio_clean: false                # cleanup minio during init?, false by default
minio_user: minio                 # minio os user, `minio` by default
minio_node: '${minio_cluster}-${minio_seq}.pigsty' # minio node name pattern
minio_data: '/data/minio'         # minio data dir(s), use {x...y} to specify multi drivers
minio_domain: sss.pigsty          # minio external domain name, `sss.pigsty` by default
minio_port: 9000                  # minio service port, 9000 by default
minio_admin_port: 9001            # minio console port, 9001 by default
minio_access_key: minioadmin      # root access key, `minioadmin` by default
minio_secret_key: minioadmin      # root secret key, `minioadmin` by default
minio_extra_vars: ''              # extra environment variables
minio_alias: sss                  # alias name for local minio deployment
minio_buckets: [ { name: pgsql }, { name: infra },  { name: redis } ]
minio_users:
  - { access_key: dba , secret_key: S3User.DBA, policy: consoleAdmin }
  - { access_key: pgbackrest , secret_key: S3User.Backup, policy: readwrite }

`minio_seq`

minio instance identifier, REQUIRED identity parameters. no default value, you have to assign it manually

`minio_cluster`

minio cluster name, minio by default. This is useful when deploying multiple MinIO clusters

`minio_clean`

cleanup minio during init?, false by default

`minio_user`

minio os user name, minio by default

`minio_node`

minio node name pattern, this is used for multi-node deployment

default values: ${minio_cluster}-${minio_seq}.pigsty

`minio_data`

minio data dir(s)

default values: /data/minio, which is a common dir for single-node deployment.

For a multi-drive deployment, you can use {x...y} notion to specify multi drivers.

`minio_domain`

minio service domain name, sss.pigsty by default.

The client can access minio S3 service via this domain name. This name will be registered to local DNSMASQ and included in SSL certs.

`minio_port`

minio service port, 9000 by default

`minio_admin_port`

minio console port, 9001 by default

`minio_access_key`

root access key, minioadmin by default

`minio_secret_key`

root secret key, minioadmin by default

default values: minioadmin

PLEASE CHANGE THIS IN YOUR DEPLOYMENT

`minio_extra_vars`

extra environment variables for minio server. Check Minio Server for the complete list.

default value is empty string, you can use multiline string to passing multiple environment variables.

`minio_alias`

MinIO alias name for the local MinIO cluster

default values: sss, which will be written to infra nodes’ / admin users’ client alias profile.

`minio_buckets`

list of minio bucket to be created by default:

minio_buckets: [ { name: pgsql }, { name: infra },  { name: redis } ]

Three default buckets are created for module PGSQL, INFRA, and REDIS

`minio_users`

list of minio user to be created, default value:

minio_users:
  - { access_key: dba , secret_key: S3User.DBA, policy: consoleAdmin }
  - { access_key: pgbackrest , secret_key: S3User.Backup, policy: readwrite }

Two default users are created for PostgreSQL DBA and pgBackREST.

PLEASE ADJUST THESE USERS & CREDENTIALS IN YOUR DEPLOYMENT!

`REDIS`

#redis_cluster:        <CLUSTER> # redis cluster name, required identity parameter
#redis_node: 1            <NODE> # redis node sequence number, node int id required
#redis_instances: {}      <NODE> # redis instances definition on this redis node
redis_fs_main: /data              # redis main data mountpoint, `/data` by default
redis_exporter_enabled: true      # install redis exporter on redis nodes?
redis_exporter_port: 9121         # redis exporter listen port, 9121 by default
redis_exporter_options: ''        # cli args and extra options for redis exporter
redis_safeguard: false            # prevent purging running redis instance?
redis_clean: true                 # purging existing redis during init?
redis_rmdata: true                # remove redis data when purging redis server?
redis_mode: standalone            # redis mode: standalone,cluster,sentinel
redis_conf: redis.conf            # redis config template path, except sentinel
redis_bind_address: '0.0.0.0'     # redis bind address, empty string will use host ip
redis_max_memory: 1GB             # max memory used by each redis instance
redis_mem_policy: allkeys-lru     # redis memory eviction policy
redis_password: ''                # redis password, empty string will disable password
redis_rdb_save: ['1200 1']        # redis rdb save directives, disable with empty list
redis_aof_enabled: false          # enable redis append only file?
redis_rename_commands: {}         # rename redis dangerous commands
redis_cluster_replicas: 1         # replica number for one master in redis cluster
redis_sentinel_monitor: []        # sentinel master list, works on sentinel cluster only

`redis_cluster`

redis cluster name, required identity parameter.

no default value, you have to define it explicitly.

Comply with regexp [a-z][a-z0-9-]*, it is recommended to use the same name as the group name and start with redis-

`redis_node`

redis node sequence number, unique integer among redis cluster is required

You have to explicitly define the node id for each redis node. integer start from 0 or 1.

`redis_instances`

redis instances definition on this redis node

no default value, you have to define redis instances on each redis node using this parameter explicitly.

Here is an example for a native redis cluster definition

redis-test: # redis native cluster: 3m x 3s
  hosts:
    10.10.10.12: { redis_node: 1 ,redis_instances: { 6379: { } ,6380: { } ,6381: { } } }
    10.10.10.13: { redis_node: 2 ,redis_instances: { 6379: { } ,6380: { } ,6381: { } } }
  vars: { redis_cluster: redis-test ,redis_password: 'redis.test' ,redis_mode: cluster, redis_max_memory: 32MB }

The port number should be unique among the node, and the replica_of in value should be instance member of the same redis cluster.

redis_instances:
    6379: {}
    6380: { replica_of: '10.10.10.13 6379' }
    6381: { replica_of: '10.10.10.13 6379' }

`redis_fs_main`

redis main data mountpoint, /data by default

default values: /data, and /data/redis will be used as the redis data directory.

`redis_exporter_enabled`

install redis exporter on redis nodes?

default value is true, which will launch a redis_exporter on this redis_node

`redis_exporter_port`

redis exporter listen port, 9121 by default

default values: 9121

`redis_exporter_options`

cli args and extra options for redis exporter, will be added to /etc/defaut/redis_exporter.

default value is empty string

`redis_safeguard`

prevent purging running redis instance?

default value is false, if set to true, and redis instance is running, init / remove playbook will abort immediately.

`redis_clean`

purging existing redis during init?

default value is true, which will remove redis server during redis init or remove.

`redis_rmdata`

remove redis data when purging redis server?

default value is true, which will remove redis rdb / aof along with redis instance.

`redis_mode`

redis mode: standalone,cluster,sentinel

default values: standalone

standalone: setup redis as standalone (master-slave) mode
cluster: setup this redis cluster as a redis native cluster
sentinel: setup redis as sentinel for standalone redis HA

`redis_conf`

redis config template path, except sentinel

default values: redis.conf, which is a template file in roles/redis/templates/redis.conf.

If you want to use your own redis config template, you can put it in templates/ directory and set this parameter to the template file name.

Note that redis sentinel are using a different template file, which is roles/redis/templates/redis-sentinel.conf

`redis_bind_address`

redis bind address, empty string will use inventory hostname

default values: 0.0.0.0, which will bind to all available IPv4 address on this host

PLEASE bind to intranet IP only in production environment, i.e. set this value to ''

`redis_max_memory`

max memory used by each redis instance, default values: 1GB

`redis_mem_policy`

redis memory eviction policy

default values: allkeys-lru, check redis eviction policy for more details

noeviction: New values aren’t saved when memory limit is reached. When a database uses replication, this applies to the primary database
allkeys-lru: Keeps most recently used keys; removes least recently used (LRU) keys
allkeys-lfu: Keeps frequently used keys; removes least frequently used (LFU) keys
volatile-lru: Removes least recently used keys with the expire field set to true.
volatile-lfu: Removes least frequently used keys with the expire field set to true.
allkeys-random: Randomly removes keys to make space for the new data added.
volatile-random: Randomly removes keys with expire field set to true.
volatile-ttl: Removes keys with expire field set to true and the shortest remaining time-to-live (TTL) value.

`redis_password`

redis password, empty string will disable password, which is the default behavior

Note that due to the implementation limitation of redis_exporter, you can only set one redis_password per node. This is usually not a problem, because pigsty does not allow deploying two different redis cluster on the same node.

PLEASE use a strong password in production environment

`redis_rdb_save`

redis rdb save directives, disable with empty list, check redis persist for details.

the default value is ["1200 1"]: dump the dataset to disk every 20 minutes if at least 1 key changed:

`redis_aof_enabled`

enable redis append only file? default value is false.

`redis_rename_commands`

rename redis dangerous commands, which is a dict of k:v old: new

default values: {}, you can hide dangerous commands like FLUSHDB and FLUSHALL by setting this value, here’s an example:

{
  "keys": "op_keys",
  "flushdb": "op_flushdb",
  "flushall": "op_flushall",
  "config": "op_config"  
}

`redis_cluster_replicas`

replica number for one master/primary in redis cluster, default values: 1

`redis_sentinel_monitor`

This can only be used when redis_mode is set to sentinel.

List of redis master to be monitored by this sentinel cluster. each master is defined as a dict with name, host, port, password, quorum keys.

redis_sentinel_monitor:  # primary list for redis sentinel, use cls as name, primary ip:port
  - { name: redis-src, host: 10.10.10.45, port: 6379 ,password: redis.src, quorum: 1 }
  - { name: redis-dst, host: 10.10.10.48, port: 6379 ,password: redis.dst, quorum: 1 }

The name and host are mandatory, port, password, quorum are optional, quorum is used to set the quorum for this master, usually large than half of the sentinel instances.

`PGSQL`

PGSQL module requires NODE module to be installed, and you also need a viable ETCD cluster to store cluster meta data.

Install PGSQL module on a single node will create a primary instance which a standalone PGSQL server/instance. Install it on additional nodes will create replicas, which can be used for serving read-only traffics, or use as standby backup. You can also create offline instance of ETL/OLAP/Interactive queries, use Sync Standby and Quorum Commit to increase data consistency, or even form a standby cluster and delayed standby cluster for disaster recovery.

You can define multiple PGSQL clusters and form a horizontal sharding cluster, which is a group of PGSQL clusters running on different nodes. Pigsty has native citus cluster group support, which can extend your PGSQL cluster to a distributed database sharding cluster.

`PG_ID`

Here are some common parameters used to identify PGSQL entities: instance, service, etc…

# pg_cluster:           #CLUSTER  # pgsql cluster name, required identity parameter
# pg_seq: 0             #INSTANCE # pgsql instance seq number, required identity parameter
# pg_role: replica      #INSTANCE # pgsql role, required, could be primary,replica,offline
# pg_instances: {}      #INSTANCE # define multiple pg instances on node in `{port:ins_vars}` format
# pg_upstream:          #INSTANCE # repl upstream ip addr for standby cluster or cascade replica
# pg_shard:             #CLUSTER  # pgsql shard name, optional identity for sharding clusters
# pg_group: 0           #CLUSTER  # pgsql shard index number, optional identity for sharding clusters
# gp_role: master       #CLUSTER  # greenplum role of this cluster, could be master or segment
pg_offline_query: false #INSTANCE # set to true to enable offline query on this instance

You have to assign these identity parameters explicitly, there’s no default value for them.

Name	Type	Level	Description
`pg_cluster`	`string`	C	PG database cluster name
`pg_seq`	`number`	I	PG database instance id
`pg_role`	`enum`	I	PG database instance role
`pg_shard`	`string`	C	PG database shard name of cluster
`pg_group`	`number`	C	PG database shard index of cluster

pg_cluster: It identifies the name of the cluster, which is configured at the cluster level.
pg_role: Configured at the instance level, identifies the role of the ins. Only the primary role will be handled specially. If not filled in, the default is the replica role and the special delayed and offline roles.
pg_seq: Used to identify the ins within the cluster, usually with an integer number incremented from 0 or 1, which is not changed once it is assigned.
{{ pg_cluster }}-{{ pg_seq }} is used to uniquely identify the ins, i.e. pg_instance.
{{ pg_cluster }}-{{ pg_role }} is used to identify the services within the cluster, i.e. pg_service.
pg_shard and pg_group are used for horizontally sharding clusters, for citus, greenplum, and matrixdb only.

pg_cluster, pg_role, pg_seq are core identity params, which are required for any Postgres cluster, and must be explicitly specified. Here’s an example:

pg-test:
  hosts:
    10.10.10.11: {pg_seq: 1, pg_role: replica}
    10.10.10.12: {pg_seq: 2, pg_role: primary}
    10.10.10.13: {pg_seq: 3, pg_role: replica}
  vars:
    pg_cluster: pg-test

All other params can be inherited from the global config or the default config, but the identity params must be explicitly specified and manually assigned.

`pg_mode`

pgsql cluster mode, cloud be pgsql, citus, or gpsql, pgsql by default.

If pg_mode is set to citus or gpsql, pg_shard and pg_group will be required for horizontal sharding clusters.

`pg_cluster`

pgsql cluster name, REQUIRED identity parameter

The cluster name will be used as the namespace for PGSQL related resources within that cluster.

The naming needs to follow the specific naming pattern: [a-z][a-z0-9-]* to be compatible with the requirements of different constraints on the identity.

`pg_seq`

pgsql instance seq number, REQUIRED identity parameter

A serial number of this instance, unique within its cluster, starting from 0 or 1.

`pg_role`

pgsql role, REQUIRED, could be primary,replica,offline

Roles for PGSQL instance, can be: primary, replica, standby or offline.

primary: Primary, there is one and only one primary in a cluster.
replica: Replica for carrying online read-only traffic, there may be a slight replication delay through (10ms~100ms, 100KB).
standby: Special replica that is always synced with primary, there’s no replication delay & data loss on this replica. (currently same as replica)
offline: Offline replica for taking on offline read-only traffic, such as statistical analysis/ETL/personal queries, etc.

Identity params, required params, and instance-level params.

`pg_instances`

define multiple pg instances on node in {port:ins_vars} format.

This parameter is reserved for multi-instance deployment on a single node which is not implemented in Pigsty yet.

`pg_upstream`

Upstream ip address for standby cluster or cascade replica

Setting pg_upstream is set on primary instance indicate that this cluster is a Standby Cluster, and will receiving changes from upstream instance, thus the primary is actually a standby leader.

Setting pg_upstream for a non-primary instance will explicitly set a replication upstream instance, if it is different from the primary ip addr, this instance will become a cascade replica. And it’s user’s responsibility to ensure that the upstream IP addr is another instance in the same cluster.

`pg_shard`

pgsql shard name, required identity parameter for sharding clusters (e.g. citus cluster), optional for common pgsql clusters.

When multiple pgsql clusters serve the same business together in a horizontally sharding style, Pigsty will mark this group of clusters as a Sharding Group.

pg_shard is the name of the shard group name. It’s usually the prefix of pg_cluster.

For example, if we have a sharding group pg-citus, and 4 clusters in it, there identity params will be:

cls pg_shard: pg-citus
cls pg_group = 0:   pg-citus0
cls pg_group = 1:   pg-citus1
cls pg_group = 2:   pg-citus2
cls pg_group = 3:   pg-citus3

`pg_group`

pgsql shard index number, required identity for sharding clusters, optional for common pgsql clusters.

Sharding cluster index of sharding group, used in pair with pg_shard. You can use any non-negative integer as the index number.

`gp_role`

greenplum/matrixdb role of this cluster, could be master or segment

master: mark the postgres cluster as greenplum master, which is the default value
segment mark the postgres cluster as greenplum segment

This parameter is only used for greenplum/matrixdb database, and is ignored for common pgsql cluster.

`pg_exporters`

additional pg_exporters to monitor remote postgres instances, default values: {}

If you wish to monitoring remote postgres instances, define them in pg_exporters and load them with pgsql-monitor.yml playbook.

pg_exporters: # list all remote instances here, alloc a unique unused local port as k
    20001: { pg_cluster: pg-foo, pg_seq: 1, pg_host: 10.10.10.10 }
    20004: { pg_cluster: pg-foo, pg_seq: 2, pg_host: 10.10.10.11 }
    20002: { pg_cluster: pg-bar, pg_seq: 1, pg_host: 10.10.10.12 }
    20003: { pg_cluster: pg-bar, pg_seq: 1, pg_host: 10.10.10.13 }

Check PGSQL Monitoring for details.

`pg_offline_query`

set to true to enable offline query on this instance

default value is false

When set to true, the user group dbrole_offline can connect to the ins and perform offline queries, regardless of the role of the current instance, just like a offline instance.

If you just have one replica or even one primary in your postgres cluster, adding this could mark it for accepting ETL, slow queries with interactive access.

`PG_BUSINESS`

Database credentials, In-Database Objects that need to be taken care of by Users.

Define Business Users: pg_users
Define Business Databases: pg_databases
Define Cluster Services: pg_services （全局定义：pg_default_services）
Ad-Hoc PostgreSQL HBA Rules: pg_default_services
Ad-Hoc Pgbouncer HBA Rules: pgb_hba_rules

Default Database Users:

Administrator: pg_admin_username / pg_admin_password
Replication User: pg_replication_username / pg_replication_password
Monitor User: pg_monitor_username / pg_monitor_password

WARNING: YOU HAVE TO CHANGE THESE DEFAULT PASSWORDs in production environment.

# postgres business object definition, overwrite in group vars
pg_users: []                      # postgres business users
pg_databases: []                  # postgres business databases
pg_services: []                   # postgres business services
pg_hba_rules: []                  # business hba rules for postgres
pgb_hba_rules: []                 # business hba rules for pgbouncer
# global credentials, overwrite in global vars
pg_dbsu_password: ''              # dbsu password, empty string means no dbsu password by default
pg_replication_username: replicator
pg_replication_password: DBUser.Replicator
pg_admin_username: dbuser_dba
pg_admin_password: DBUser.DBA
pg_monitor_username: dbuser_monitor
pg_monitor_password: DBUser.Monitor

`pg_users`

postgres business users, has to be defined at cluster level.

default values: [], each object in the array defines a User/Role. Examples:

- name: dbuser_meta               # REQUIRED, `name` is the only mandatory field of a user definition
  password: DBUser.Meta           # optional, password, can be a scram-sha-256 hash string or plain text
  login: true                     # optional, can log in, true by default  (new biz ROLE should be false)
  superuser: false                # optional, is superuser? false by default
  createdb: false                 # optional, can create database? false by default
  createrole: false               # optional, can create role? false by default
  inherit: true                   # optional, can this role use inherited privileges? true by default
  replication: false              # optional, can this role do replication? false by default
  bypassrls: false                # optional, can this role bypass row level security? false by default
  pgbouncer: true                 # optional, add this user to pgbouncer user-list? false by default (production user should be true explicitly)
  connlimit: -1                   # optional, user connection limit, default -1 disable limit
  expire_in: 3650                 # optional, now + n days when this role is expired (OVERWRITE expire_at)
  expire_at: '2030-12-31'         # optional, YYYY-MM-DD 'timestamp' when this role is expired  (OVERWRITTEN by expire_in)
  comment: pigsty admin user      # optional, comment string for this user/role
  roles: [dbrole_admin]           # optional, belonged roles. default roles are: dbrole_{admin,readonly,readwrite,offline}
  parameters: {}                  # optional, role level parameters with `ALTER ROLE SET`
  pool_mode: transaction          # optional, pgbouncer pool mode at user level, transaction by default
  pool_connlimit: -1              # optional, max database connections at user level, default -1 disable limit
  search_path: public             # key value config parameters according to postgresql documentation (e.g: use pigsty as default search_path)

The only mandatory field of a user definition is name, and the rest are optional.

`pg_databases`

postgres business databases, has to be defined at cluster level.

default values: [], each object in the array defines a Database. Examples:

- name: meta                      # REQUIRED, `name` is the only mandatory field of a database definition
  baseline: cmdb.sql              # optional, database sql baseline path, (relative path among ansible search path, e.g files/)
  pgbouncer: true                 # optional, add this database to pgbouncer database list? true by default
  schemas: [pigsty]               # optional, additional schemas to be created, array of schema names
  extensions:                     # optional, additional extensions to be installed: array of `{name[,schema]}`
    - { name: postgis , schema: public }
    - { name: timescaledb }
  comment: pigsty meta database   # optional, comment string for this database
  owner: postgres                 # optional, database owner, postgres by default
  template: template1             # optional, which template to use, template1 by default
  encoding: UTF8                  # optional, database encoding, UTF8 by default. (MUST same as template database)
  locale: C                       # optional, database locale, C by default.  (MUST same as template database)
  lc_collate: C                   # optional, database collate, C by default. (MUST same as template database)
  lc_ctype: C                     # optional, database ctype, C by default.   (MUST same as template database)
  tablespace: pg_default          # optional, default tablespace, 'pg_default' by default.
  allowconn: true                 # optional, allow connection, true by default. false will disable connect at all
  revokeconn: false               # optional, revoke public connection privilege. false by default. (leave connect with grant option to owner)
  register_datasource: true       # optional, register this database to grafana datasources? true by default
  connlimit: -1                   # optional, database connection limit, default -1 disable limit
  pool_auth_user: dbuser_meta     # optional, all connection to this pgbouncer database will be authenticated by this user
  pool_mode: transaction          # optional, pgbouncer pool mode at database level, default transaction
  pool_size: 64                   # optional, pgbouncer pool size at database level, default 64
  pool_size_reserve: 32           # optional, pgbouncer pool size reserve at database level, default 32
  pool_size_min: 0                # optional, pgbouncer pool size min at database level, default 0
  pool_max_db_conn: 100           # optional, max database connections at database level, default 100

In each database definition, the DB name is mandatory and the rest are optional.

`pg_services`

postgres business services exposed via haproxy, has to be defined at cluster level.

You can define ad hoc services with pg_services in additional to default pg_default_services

default values: [], each object in the array defines a Service. Examples:

- name: standby                   # required, service name, the actual svc name will be prefixed with `pg_cluster`, e.g: pg-meta-standby
  port: 5435                      # required, service exposed port (work as kubernetes service node port mode)
  ip: "*"                         # optional, service bind ip address, `*` for all ip by default
  selector: "[]"                  # required, service member selector, use JMESPath to filter inventory
  dest: default                   # optional, destination port, default|postgres|pgbouncer|<port_number>, 'default' by default
  check: /sync                    # optional, health check url path, / by default
  backup: "[? pg_role == `primary`]"  # backup server selector
  maxconn: 3000                   # optional, max allowed front-end connection
  balance: roundrobin             # optional, haproxy load balance algorithm (roundrobin by default, other: leastconn)
  options: 'inter 3s fastinter 1s downinter 5s rise 3 fall 3 on-marked-down shutdown-sessions slowstart 30s maxconn 3000 maxqueue 128 weight 100'

`pg_hba_rules`

business hba rules for postgres

default values: [], each object in array is an HBA Rule definition:

Which are array of hba object, each hba object may look like

# RAW HBA RULES
- title: allow intranet password access
  role: common
  rules:
    - host   all  all  10.0.0.0/8      md5
    - host   all  all  172.16.0.0/12   md5
    - host   all  all  192.168.0.0/16  md5

title: Rule Title, transform into comment in hba file
rules: Array of strings, each string is a raw hba rule record
role: Applied roles, where to install these hba rules
- common: apply for all instances
- primary, replica,standby, offline: apply on corresponding instances with that pg_role.
- special case: HBA rule with role == 'offline' will be installed on instance with pg_offline_query flag

or you can use another alias form

- addr: 'intra'    # world|intra|infra|admin|local|localhost|cluster|<cidr>
  auth: 'pwd'      # trust|pwd|ssl|cert|deny|<official auth method>
  user: 'all'      # all|${dbsu}|${repl}|${admin}|${monitor}|<user>|<group>
  db: 'all'        # all|replication|....
  rules: []        # raw hba string precedence over above all
  title: allow intranet password access

pg_default_hba_rules is similar to this, but is used for global HBA rule settings

`pgb_hba_rules`

business hba rules for pgbouncer, default values: []

Similar to pg_hba_rules, array of hba rule object, except this is for pgbouncer.

`pg_replication_username`

postgres replication username, replicator by default

This parameter is globally used, it not wise to change it.

`pg_replication_password`

postgres replication password, DBUser.Replicator by default

WARNING: CHANGE THIS IN PRODUCTION ENVIRONMENT!!!!

`pg_admin_username`

postgres admin username, dbuser_dba by default, which is a global postgres superuser.

default values: dbuser_dba

`pg_admin_password`

postgres admin password in plain text, DBUser.DBA by default

WARNING: CHANGE THIS IN PRODUCTION ENVIRONMENT!!!!

`pg_monitor_username`

postgres monitor username, dbuser_monitor by default, which is a global monitoring user.

`pg_monitor_password`

postgres monitor password, DBUser.Monitor by default.

Try not using the @:/ character in the password to avoid problems with PGURL string.

WARNING: CHANGE THIS IN PRODUCTION ENVIRONMENT!!!!

`pg_dbsu_password`

PostgreSQL dbsu password for pg_dbsu, empty string means no dbsu password, which is the default behavior.

WARNING: It’s not recommend to set a dbsu password for common PGSQL clusters, except for pg_mode = citus.

`PG_INSTALL`

This section is responsible for installing PostgreSQL & Extensions.

If you wish to install a different major version, just make sure repo packages exists and overwrite pg_version on cluster level.

To install extra extensions, overwrite pg_extensions on cluster level. Beware that not all extensions are available with other major versions.

pg_dbsu: postgres                 # os dbsu name, postgres by default, better not change it
pg_dbsu_uid: 26                   # os dbsu uid and gid, 26 for default postgres users and groups
pg_dbsu_sudo: limit               # dbsu sudo privilege, none,limit,all,nopass. limit by default
pg_dbsu_home: /var/lib/pgsql      # postgresql home directory, `/var/lib/pgsql` by default
pg_dbsu_ssh_exchange: true        # exchange postgres dbsu ssh key among same pgsql cluster
pg_version: 15                    # postgres major version to be installed, 15 by default
pg_bin_dir: /usr/pgsql/bin        # postgres binary dir, `/usr/pgsql/bin` by default
pg_log_dir: /pg/log/postgres      # postgres log dir, `/pg/log/postgres` by default
pg_packages:                      # pg packages to be installed, `${pg_version}` will be replaced
  - postgresql${pg_version}*
  - patroni pgbouncer pgbackrest pg_exporter pgbadger vip-manager patroni-etcd             # pgdg common tools
  - pg_repack_${pg_version}* wal2json_${pg_version}* passwordcheck_cracklib_${pg_version}* # important extensions
pg_extensions: # citus & hydra are exclusive
  - postgis34_${pg_version}* timescaledb-2-postgresql-${pg_version}* pgvector_${pg_version}*

`pg_dbsu`

os dbsu name, postgres by default, it’s not wise to change it.

When installing Greenplum / MatrixDB, set this parameter to the corresponding default value: gpadmin|mxadmin.

`pg_dbsu_uid`

os dbsu uid and gid, 26 for default postgres users and groups, which is consistent with the official pgdg RPM.

For Ubuntu/Debian, there’s no default postgres UID/GID, consider using another ad hoc value, such as 543 instead.

`pg_dbsu_sudo`

dbsu sudo privilege, coud be none, limit ,all ,nopass. limit by default

none: No Sudo privilege
limit: Limited sudo privilege to execute systemctl commands for database-related components, default.
all: Full sudo privilege, password required.
nopass: Full sudo privileges without a password (not recommended).

`pg_dbsu_home`

postgresql home directory, /var/lib/pgsql by default, which is consistent with the official pgdg RPM.

`pg_dbsu_ssh_exchange`

exchange postgres dbsu ssh key among same pgsql cluster?

default value is true, means the dbsu can ssh to each other among the same cluster.

`pg_version`

postgres major version to be installed, 15 by default

Note that PostgreSQL physical stream replication cannot cross major versions, so do not configure this on instance level.

You can use the parameters in pg_packages and pg_extensions to install rpms for the specific pg major version.

`pg_bin_dir`

postgres binary dir, /usr/pgsql/bin by default

The default value is a soft link created manually during the installation process, pointing to the specific Postgres version dir installed.

For example /usr/pgsql -> /usr/pgsql-15. For more details, check PGSQL File Structure for details.

`pg_log_dir`

postgres log dir, /pg/log/postgres by default.

caveat: if pg_log_dir is prefixed with pg_data it will not be created explicit (it will be created by postgres itself then).

`pg_packages`

pg packages to be installed, ${pg_version} will be replaced to the actual value of pg_version

PostgreSQL, pgbouncer, pg_exporter, pgbadger, vip-manager, patroni, pgbackrest are install by default.

pg_packages:                      # pg packages to be installed, `${pg_version}` will be replaced
  - postgresql${pg_version}*
  - patroni pgbouncer pgbackrest pg_exporter pgbadger vip-manager patroni-etcd             # pgdg common tools
  - pg_repack_${pg_version}* wal2json_${pg_version}* passwordcheck_cracklib_${pg_version}* # important extensions

For Ubuntu/Debian, the proper value has to be replaced explicitly:

pg_packages:                      # pg packages to be installed, `${pg_version}` will be replaced
  - postgresql-*-${pg_version}
  - patroni pgbouncer pgbackrest pg-exporter pgbadger vip-manager
  - postgresql-${pg_version}-repack postgresql-${pg_version}-wal2json

`pg_extensions`

pg extensions to be installed, ${pg_version} will be replaced with actual pg_version

Pigsty will install the following extensions for all database instances by default: postgis, timescaledb, pgvector, pg_repack, wal2json and passwordcheck_cracklib.

pg_extensions: # citus & hydra are exclusive
  - postgis34_${pg_version}* timescaledb-2-postgresql-${pg_version}* pgvector_${pg_version}*

For Ubuntu/Debian, the proper value has to be replaced explicitly:

pg_extensions:                    # pg extensions to be installed, `${pg_version}` will be replaced
  - postgresql-${pg_version}-postgis* timescaledb-2-postgresql-${pg_version} postgresql-${pg_version}-pgvector

Beware that not all extensions are available with other PG major versions, but Pigsty guarantees that important extensions wal2json, pg_repack and passwordcheck_cracklib (EL only) are available on all PG major versions.

`PG_BOOTSTRAP`

Bootstrap a postgres cluster with patroni, and setup pgbouncer connection pool along with it.

It also init cluster template databases with default roles, schemas & extensions & default privileges specified in PG_PROVISION

pg_safeguard: false               # prevent purging running postgres instance? false by default
pg_clean: true                    # purging existing postgres during pgsql init? true by default
pg_data: /pg/data                 # postgres data directory, `/pg/data` by default
pg_fs_main: /data                 # mountpoint/path for postgres main data, `/data` by default
pg_fs_bkup: /data/backups         # mountpoint/path for pg backup data, `/data/backup` by default
pg_storage_type: SSD              # storage type for pg main data, SSD,HDD, SSD by default
pg_dummy_filesize: 64MiB          # size of `/pg/dummy`, hold 64MB disk space for emergency use
pg_listen: '0.0.0.0'              # postgres listen address, `0.0.0.0` (all ipv4 addr) by default
pg_port: 5432                     # postgres listen port, 5432 by default
pg_localhost: /var/run/postgresql # postgres unix socket dir for localhost connection
pg_namespace: /pg                 # top level key namespace in etcd, used by patroni & vip
patroni_enabled: true             # if disabled, no postgres cluster will be created during init
patroni_mode: default             # patroni working mode: default,pause,remove
patroni_port: 8008                # patroni listen port, 8008 by default
patroni_log_dir: /pg/log/patroni  # patroni log dir, `/pg/log/patroni` by default
patroni_ssl_enabled: false        # secure patroni RestAPI communications with SSL?
patroni_watchdog_mode: off        # patroni watchdog mode: automatic,required,off. off by default
patroni_username: postgres        # patroni restapi username, `postgres` by default
patroni_password: Patroni.API     # patroni restapi password, `Patroni.API` by default
patroni_citus_db: postgres        # citus database managed by patroni, postgres by default
pg_conf: oltp.yml                 # config template: oltp,olap,crit,tiny. `oltp.yml` by default
pg_max_conn: auto                 # postgres max connections, `auto` will use recommended value
pg_shared_buffer_ratio: 0.25      # postgres shared buffer ratio, 0.25 by default, 0.1~0.4
pg_rto: 30                        # recovery time objective in seconds,  `30s` by default
pg_rpo: 1048576                   # recovery point objective in bytes, `1MiB` at most by default
pg_libs: 'timescaledb, pg_stat_statements, auto_explain'  # extensions to be loaded
pg_delay: 0                       # replication apply delay for standby cluster leader
pg_checksum: false                # enable data checksum for postgres cluster?
pg_pwd_enc: scram-sha-256         # passwords encryption algorithm: md5,scram-sha-256
pg_encoding: UTF8                 # database cluster encoding, `UTF8` by default
pg_locale: C                      # database cluster local, `C` by default
pg_lc_collate: C                  # database cluster collate, `C` by default
pg_lc_ctype: en_US.UTF8           # database character type, `en_US.UTF8` by default
pgbouncer_enabled: true           # if disabled, pgbouncer will not be launched on pgsql host
pgbouncer_port: 6432              # pgbouncer listen port, 6432 by default
pgbouncer_log_dir: /pg/log/pgbouncer  # pgbouncer log dir, `/pg/log/pgbouncer` by default
pgbouncer_auth_query: false       # query postgres to retrieve unlisted business users?
pgbouncer_poolmode: transaction   # pooling mode: transaction,session,statement, transaction by default
pgbouncer_sslmode: disable        # pgbouncer client ssl mode, disable by default

`pg_safeguard`

prevent purging running postgres instance? false by default

If enabled, pgsql.yml & pgsql-rm.yml will abort immediately if any postgres instance is running.

`pg_clean`

purging existing postgres during pgsql init? true by default

default value is true, it will purge existing postgres instance during pgsql.yml init. which makes the playbook idempotent.

if set to false, pgsql.yml will abort if there’s already a running postgres instance. and pgsql-rm.yml will NOT remove postgres data (only stop the server).

`pg_data`

postgres data directory, /pg/data by default

default values: /pg/data, DO NOT CHANGE IT.

It’s a soft link that point to underlying data directory.

Check PGSQL File Structure for details.

`pg_fs_main`

mountpoint/path for postgres main data, /data by default

default values: /data, which will be used as parent dir of postgres main data directory: /data/postgres.

It’s recommended to use NVME SSD for postgres main data storage, Pigsty is optimized for SSD storage by default. But HDD is also supported, you can change pg_storage_type to HDD to optimize for HDD storage.

`pg_fs_bkup`

mountpoint/path for pg backup data, /data/backup by default

If you are using the default pgbackrest_method = local, it is recommended to have a separate disk for backup storage.

The backup disk should be large enough to hold all your backups, at least enough for 3 basebackups + 2 days WAL archive. This is usually not a problem since you can use cheap & large HDD for that.

It’s recommended to use a separate disk for backup storage, otherwise pigsty will fall back to the main data disk.

`pg_storage_type`

storage type for pg main data, SSD,HDD, SSD by default

default values: SSD, it will affect some tuning parameters, such as random_page_cost & effective_io_concurrency

`pg_dummy_filesize`

size of /pg/dummy, default values: 64MiB, which hold 64MB disk space for emergency use

When the disk is full, removing the placeholder file can free up some space for emergency use, it is recommended to use at least 8GiB for production use.

`pg_listen`

postgres/pgbouncer listen address, 0.0.0.0 (all ipv4 addr) by default

You can use placeholder in this variable:

${ip}: translate to inventory_hostname, which is primary private IP address in the inventory
${vip}: if pg_vip_enabled, this will translate to host part of pg_vip_address
${lo}: will translate to 127.0.0.1

For example: '${ip},${lo}' or '${ip},${vip},${lo}'.

`pg_port`

postgres listen port, 5432 by default.

`pg_localhost`

postgres unix socket dir for localhost connection, default values: /var/run/postgresql

The Unix socket dir for PostgreSQL and Pgbouncer local connection, which is used by pg_exporter and patroni.

`pg_namespace`

top level key namespace in etcd, used by patroni & vip, default values is: /pg , and it’s not recommended to change it.

`patroni_enabled`

if disabled, no postgres cluster will be created during init

default value is true, If disabled, Pigsty will skip pulling up patroni (thus postgres).

This option is useful when trying to add some components to an existing postgres instance.

`patroni_mode`

patroni working mode: default, pause, remove

default values: default

default: Bootstrap PostgreSQL cluster with Patroni
pause: Just like default, but entering maintenance mode after bootstrap
remove: Init the cluster with Patroni, them remove Patroni and use raw PostgreSQL instead.

`patroni_port`

patroni listen port, 8008 by default, changing it is not recommended.

The Patroni API server listens on this port for health checking & API requests.

`patroni_log_dir`

patroni log dir, /pg/log/patroni by default, which will be collected by promtail.

`patroni_ssl_enabled`

Secure patroni RestAPI communications with SSL? default value is false

This parameter is a global flag that can only be set before deployment.

Since if SSL is enabled for patroni, you’ll have to perform healthcheck, metrics scrape and API call with HTTPS instead of HTTP.

`patroni_watchdog_mode`

In case of primary failure, patroni can use watchdog to fencing the old primary node to avoid split-brain.

patroni watchdog mode: automatic, required, off:

off: not using watchdog. avoid fencing at all. This is the default value.
automatic: Enable watchdog if the kernel has softdog module enabled and watchdog is owned by dbsu
required: Force watchdog, refuse to start if softdog is not available

default value is off, you should not enable watchdog on infra nodes to avoid fencing.

For those critical systems where data consistency prevails over availability, it is recommended to enable watchdog.

Beware that if all your traffic is accessed via haproxy, there is no risk of brain split at all.

`patroni_username`

patroni restapi username, postgres by default, used in pair with patroni_password

Patroni unsafe RESTAPI is protected by username/password by default, check Config Cluster and Patroni RESTAPI for details.

`patroni_password`

patroni restapi password, Patroni.API by default

WARNING: CHANGE THIS IN PRODUCTION ENVIRONMENT!!!!

`patroni_citus_db`

citus database managed by patroni, postgres by default.

Patroni 3.0’s native citus will specify a managed database for citus. which is created by patroni itself.

`pg_conf`

config template: {oltp,olap,crit,tiny}.yml, oltp.yml by default

tiny.yml: optimize for tiny nodes, virtual machines, small demo, (1~8Core, 1~16GB)
oltp.yml: optimize for OLTP workloads and latency sensitive applications, (4C8GB+), which is the default template
olap.yml: optimize for OLAP workloads and throughput (4C8G+)
crit.yml: optimize for data consistency and critical applications (4C8G+)

default values: oltp.yml, but configure procedure will set this value to tiny.yml if current node is a tiny node.

You can have your own template, just put it under templates/<mode>.yml and set this value to the template name.

`pg_max_conn`

postgres max connections, You can specify a value between 50 and 5000, or use auto to use recommended value.

default value is auto, which will set max connections according to the pg_conf and pg_default_service_dest.

tiny: 100
olap: 200
oltp: 200 (pgbouncer) / 1000 (postgres)
- pg_default_service_dest = pgbouncer : 200
- pg_default_service_dest = postgres : 1000
crit: 200 (pgbouncer) / 1000 (postgres)
- pg_default_service_dest = pgbouncer : 200
- pg_default_service_dest = postgres : 1000

It’s not recommended to set this value greater than 5000, otherwise you have to increase the haproxy service connection limit manually as well.

Pgbouncer’s transaction pooling can alleviate the problem of too many OLTP connections, but it’s not recommended to use it in OLAP scenarios.

`pg_shared_buffer_ratio`

postgres shared buffer memory ratio, 0.25 by default, 0.1~0.4

default values: 0.25, means 25% of node memory will be used as PostgreSQL shard buffers.

Setting this value greater than 0.4 (40%) is usually not a good idea.

Note that shared buffer is only part of shared memory in PostgreSQL, to calculate the total shared memory, use show shared_memory_size_in_huge_pages;.

`pg_rto`

recovery time objective in seconds, This will be used as Patroni TTL value, 30s by default.

If a primary instance is missing for such a long time, a new leader election will be triggered.

Decrease the value can reduce the unavailable time (unable to write) of the cluster during failover, but it will make the cluster more sensitive to network jitter, thus increase the chance of false-positive failover.

Config this according to your network condition and expectation to trade-off between chance and impact, the default value is 30s, and it will be populated to the following patroni parameters:

# the TTL to acquire the leader lock (in seconds). Think of it as the length of time before initiation of the automatic failover process. Default value: 30
ttl: {{ pg_rto }}

# the number of seconds the loop will sleep. Default value: 10 , this is patroni check loop interval
loop_wait: {{ (pg_rto / 3)|round(0, 'ceil')|int }}

# timeout for DCS and PostgreSQL operation retries (in seconds). DCS or network issues shorter than this will not cause Patroni to demote the leader. Default value: 10
retry_timeout: {{ (pg_rto / 3)|round(0, 'ceil')|int }}

# the amount of time a primary is allowed to recover from failures before failover is triggered (in seconds), Max RTO: 2 loop wait + primary_start_timeout
primary_start_timeout: {{ (pg_rto / 3)|round(0, 'ceil')|int }}

`pg_rpo`

recovery point objective in bytes, 1MiB at most by default

default values: 1048576, which will tolerate at most 1MiB data loss during failover.

when the primary is down and all replicas are lagged, you have to make a tough choice to trade off between Availability and Consistency:

Promote a replica to be the new primary and bring system back online ASAP, with the price of an acceptable data loss (e.g. less than 1MB).
Wait for the primary to come back (which may never be) or human intervention to avoid any data loss.

You can use crit.yml conf template to ensure no data loss during failover, but it will sacrifice some performance.

`pg_libs`

shared preloaded libraries, pg_stat_statements,auto_explain by default.

They are two extensions that come with PostgreSQL, and it is strongly recommended to enable them.

For existing clusters, you can configure the shared_preload_libraries parameter of the cluster and apply it.

If you want to use TimescaleDB or Citus extensions, you need to add timescaledb or citus to this list. timescaledb and citus should be placed at the top of this list, for example:

citus,timescaledb,pg_stat_statements,auto_explain

Other extensions that need to be loaded can also be added to this list, such as pg_cron, pgml, etc.

Generally, citus and timescaledb have the highest priority and should be added to the top of the list.

`pg_delay`

replication apply delay for standby cluster leader , default values: 0.

if this value is set to a positive value, the standby cluster leader will be delayed for this time before apply WAL changes.

Check delayed standby cluster for details.

`pg_checksum`

enable data checksum for postgres cluster?, default value is false.

This parameter can only be set before PGSQL deployment. (but you can enable it manually later)

If pg_conf crit.yml template is used, data checksum is always enabled regardless of this parameter to ensure data integrity.

`pg_pwd_enc`

passwords encryption algorithm: md5,scram-sha-256

default values: scram-sha-256, if you have compatibility issues with old clients, you can set it to md5 instead.

`pg_encoding`

database cluster encoding, UTF8 by default

`pg_locale`

database cluster local, C by default

`pg_lc_collate`

database cluster collate, C by default, It’s not recommended to change this value unless you know what you are doing.

`pg_lc_ctype`

database character type, en_US.UTF8 by default

`pgbouncer_enabled`

default value is true, if disabled, pgbouncer will not be launched on pgsql host

`pgbouncer_port`

pgbouncer listen port, 6432 by default

`pgbouncer_log_dir`

pgbouncer log dir, /pg/log/pgbouncer by default, referenced by promtail the logging agent.

`pgbouncer_auth_query`

query postgres to retrieve unlisted business users? default value is false

If enabled, pgbouncer user will be authenticated against postgres database with SELECT username, password FROM monitor.pgbouncer_auth($1), otherwise, only the users with pgbouncer: true will be allowed to connect to pgbouncer.

`pgbouncer_poolmode`

Pgbouncer pooling mode: transaction, session, statement, transaction by default

session: Session-level pooling with the best compatibility.
transaction: Transaction-level pooling with better performance (lots of small conns), could break some session level features such as notify/listen, etc…
statements: Statement-level pooling which is used for simple read-only queries.

If you application has some compatibility issues with pgbouncer, you can try to change this value to session instead.

`pgbouncer_sslmode`

pgbouncer client ssl mode, disable by default

default values: disable, beware that this may have a huge performance impact on your pgbouncer.

disable: Plain TCP. If client requests TLS, it’s ignored. Default.
allow: If client requests TLS, it is used. If not, plain TCP is used. If the client presents a client certificate, it is not validated.
prefer: Same as allow.
require: Client must use TLS. If not, the client connection is rejected. If the client presents a client certificate, it is not validated.
verify-ca: Client must use TLS with valid client certificate.
verify-full: Same as verify-ca.

`PG_PROVISION`

PG_BOOTSTRAP will bootstrap a new postgres cluster with patroni, while PG_PROVISION will create default objects in the cluster, including:

Default Roles
Default Users
Default Privileges
Default HBA Rules
Default Schemas
Default Extensions

pg_provision: true                # provision postgres cluster after bootstrap
pg_init: pg-init                  # provision init script for cluster template, `pg-init` by default
pg_default_roles:                 # default roles and users in postgres cluster
  - { name: dbrole_readonly  ,login: false ,comment: role for global read-only access     }
  - { name: dbrole_offline   ,login: false ,comment: role for restricted read-only access }
  - { name: dbrole_readwrite ,login: false ,roles: [dbrole_readonly] ,comment: role for global read-write access }
  - { name: dbrole_admin     ,login: false ,roles: [pg_monitor, dbrole_readwrite] ,comment: role for object creation }
  - { name: postgres     ,superuser: true  ,comment: system superuser }
  - { name: replicator ,replication: true  ,roles: [pg_monitor, dbrole_readonly] ,comment: system replicator }
  - { name: dbuser_dba   ,superuser: true  ,roles: [dbrole_admin]  ,pgbouncer: true ,pool_mode: session, pool_connlimit: 16 ,comment: pgsql admin user }
  - { name: dbuser_monitor ,roles: [pg_monitor] ,pgbouncer: true ,parameters: {log_min_duration_statement: 1000 } ,pool_mode: session ,pool_connlimit: 8 ,comment: pgsql monitor user }
pg_default_privileges:            # default privileges when created by admin user
  - GRANT USAGE      ON SCHEMAS   TO dbrole_readonly
  - GRANT SELECT     ON TABLES    TO dbrole_readonly
  - GRANT SELECT     ON SEQUENCES TO dbrole_readonly
  - GRANT EXECUTE    ON FUNCTIONS TO dbrole_readonly
  - GRANT USAGE      ON SCHEMAS   TO dbrole_offline
  - GRANT SELECT     ON TABLES    TO dbrole_offline
  - GRANT SELECT     ON SEQUENCES TO dbrole_offline
  - GRANT EXECUTE    ON FUNCTIONS TO dbrole_offline
  - GRANT INSERT     ON TABLES    TO dbrole_readwrite
  - GRANT UPDATE     ON TABLES    TO dbrole_readwrite
  - GRANT DELETE     ON TABLES    TO dbrole_readwrite
  - GRANT USAGE      ON SEQUENCES TO dbrole_readwrite
  - GRANT UPDATE     ON SEQUENCES TO dbrole_readwrite
  - GRANT TRUNCATE   ON TABLES    TO dbrole_admin
  - GRANT REFERENCES ON TABLES    TO dbrole_admin
  - GRANT TRIGGER    ON TABLES    TO dbrole_admin
  - GRANT CREATE     ON SCHEMAS   TO dbrole_admin
pg_default_schemas: [ monitor ]   # default schemas to be created
pg_default_extensions:            # default extensions to be created
  - { name: adminpack          ,schema: pg_catalog }
  - { name: pg_stat_statements ,schema: monitor }
  - { name: pgstattuple        ,schema: monitor }
  - { name: pg_buffercache     ,schema: monitor }
  - { name: pageinspect        ,schema: monitor }
  - { name: pg_prewarm         ,schema: monitor }
  - { name: pg_visibility      ,schema: monitor }
  - { name: pg_freespacemap    ,schema: monitor }
  - { name: postgres_fdw       ,schema: public  }
  - { name: file_fdw           ,schema: public  }
  - { name: btree_gist         ,schema: public  }
  - { name: btree_gin          ,schema: public  }
  - { name: pg_trgm            ,schema: public  }
  - { name: intagg             ,schema: public  }
  - { name: intarray           ,schema: public  }
  - { name: pg_repack }
pg_reload: true                   # reload postgres after hba changes
pg_default_hba_rules:             # postgres default host-based authentication rules
  - {user: '${dbsu}'    ,db: all         ,addr: local     ,auth: ident ,title: 'dbsu access via local os user ident'  }
  - {user: '${dbsu}'    ,db: replication ,addr: local     ,auth: ident ,title: 'dbsu replication from local os ident' }
  - {user: '${repl}'    ,db: replication ,addr: localhost ,auth: pwd   ,title: 'replicator replication from localhost'}
  - {user: '${repl}'    ,db: replication ,addr: intra     ,auth: pwd   ,title: 'replicator replication from intranet' }
  - {user: '${repl}'    ,db: postgres    ,addr: intra     ,auth: pwd   ,title: 'replicator postgres db from intranet' }
  - {user: '${monitor}' ,db: all         ,addr: localhost ,auth: pwd   ,title: 'monitor from localhost with password' }
  - {user: '${monitor}' ,db: all         ,addr: infra     ,auth: pwd   ,title: 'monitor from infra host with password'}
  - {user: '${admin}'   ,db: all         ,addr: infra     ,auth: ssl   ,title: 'admin @ infra nodes with pwd & ssl'   }
  - {user: '${admin}'   ,db: all         ,addr: world     ,auth: ssl   ,title: 'admin @ everywhere with ssl & pwd'    }
  - {user: '+dbrole_readonly',db: all    ,addr: localhost ,auth: pwd   ,title: 'pgbouncer read/write via local socket'}
  - {user: '+dbrole_readonly',db: all    ,addr: intra     ,auth: pwd   ,title: 'read/write biz user via password'     }
  - {user: '+dbrole_offline' ,db: all    ,addr: intra     ,auth: pwd   ,title: 'allow etl offline tasks from intranet'}
pgb_default_hba_rules:            # pgbouncer default host-based authentication rules
  - {user: '${dbsu}'    ,db: pgbouncer   ,addr: local     ,auth: peer  ,title: 'dbsu local admin access with os ident'}
  - {user: 'all'        ,db: all         ,addr: localhost ,auth: pwd   ,title: 'allow all user local access with pwd' }
  - {user: '${monitor}' ,db: pgbouncer   ,addr: intra     ,auth: pwd   ,title: 'monitor access via intranet with pwd' }
  - {user: '${monitor}' ,db: all         ,addr: world     ,auth: deny  ,title: 'reject all other monitor access addr' }
  - {user: '${admin}'   ,db: all         ,addr: intra     ,auth: pwd   ,title: 'admin access via intranet with pwd'   }
  - {user: '${admin}'   ,db: all         ,addr: world     ,auth: deny  ,title: 'reject all other admin access addr'   }
  - {user: 'all'        ,db: all         ,addr: intra     ,auth: pwd   ,title: 'allow all user intra access with pwd' }

`pg_provision`

provision postgres cluster after bootstrap, default value is true.

If disabled, postgres cluster will not be provisioned after bootstrap.

`pg_init`

Provision init script for cluster template, pg-init by default, which is located in roles/pgsql/templates/pg-init

You can add your own logic in the init script, or provide a new one in templates/ and set pg_init to the new script name.

`pg_default_roles`

default roles and users in postgres cluster.

Pigsty has a built-in role system, check PGSQL Access Control for details.

pg_default_roles:                 # default roles and users in postgres cluster
  - { name: dbrole_readonly  ,login: false ,comment: role for global read-only access     }
  - { name: dbrole_offline   ,login: false ,comment: role for restricted read-only access }
  - { name: dbrole_readwrite ,login: false ,roles: [dbrole_readonly] ,comment: role for global read-write access }
  - { name: dbrole_admin     ,login: false ,roles: [pg_monitor, dbrole_readwrite] ,comment: role for object creation }
  - { name: postgres     ,superuser: true  ,comment: system superuser }
  - { name: replicator ,replication: true  ,roles: [pg_monitor, dbrole_readonly] ,comment: system replicator }
  - { name: dbuser_dba   ,superuser: true  ,roles: [dbrole_admin]  ,pgbouncer: true ,pool_mode: session, pool_connlimit: 16 ,comment: pgsql admin user }
  - { name: dbuser_monitor ,roles: [pg_monitor] ,pgbouncer: true ,parameters: {log_min_duration_statement: 1000 } ,pool_mode: session ,pool_connlimit: 8 ,comment: pgsql monitor user }

`pg_default_privileges`

default privileges for each databases:

pg_default_privileges:            # default privileges when created by admin user
  - GRANT USAGE      ON SCHEMAS   TO dbrole_readonly
  - GRANT SELECT     ON TABLES    TO dbrole_readonly
  - GRANT SELECT     ON SEQUENCES TO dbrole_readonly
  - GRANT EXECUTE    ON FUNCTIONS TO dbrole_readonly
  - GRANT USAGE      ON SCHEMAS   TO dbrole_offline
  - GRANT SELECT     ON TABLES    TO dbrole_offline
  - GRANT SELECT     ON SEQUENCES TO dbrole_offline
  - GRANT EXECUTE    ON FUNCTIONS TO dbrole_offline
  - GRANT INSERT     ON TABLES    TO dbrole_readwrite
  - GRANT UPDATE     ON TABLES    TO dbrole_readwrite
  - GRANT DELETE     ON TABLES    TO dbrole_readwrite
  - GRANT USAGE      ON SEQUENCES TO dbrole_readwrite
  - GRANT UPDATE     ON SEQUENCES TO dbrole_readwrite
  - GRANT TRUNCATE   ON TABLES    TO dbrole_admin
  - GRANT REFERENCES ON TABLES    TO dbrole_admin
  - GRANT TRIGGER    ON TABLES    TO dbrole_admin
  - GRANT CREATE     ON SCHEMAS   TO dbrole_admin

Pigsty has a built-in privileges base on default role system, check PGSQL Privileges for details.

`pg_default_schemas`

default schemas to be created, default values is: [ monitor ], which will create a monitor schema on all databases.

`pg_default_extensions`

default extensions to be created, default value:

pg_default_extensions: # default extensions to be created
  - { name: adminpack          ,schema: pg_catalog }
  - { name: pg_stat_statements ,schema: monitor }
  - { name: pgstattuple        ,schema: monitor }
  - { name: pg_buffercache     ,schema: monitor }
  - { name: pageinspect        ,schema: monitor }
  - { name: pg_prewarm         ,schema: monitor }
  - { name: pg_visibility      ,schema: monitor }
  - { name: pg_freespacemap    ,schema: monitor }
  - { name: postgres_fdw       ,schema: public  }
  - { name: file_fdw           ,schema: public  }
  - { name: btree_gist         ,schema: public  }
  - { name: btree_gin          ,schema: public  }
  - { name: pg_trgm            ,schema: public  }
  - { name: intagg             ,schema: public  }
  - { name: intarray           ,schema: public  }
  - { name: pg_repack }

The only 3rd party extension is pg_repack, which is important for database maintenance, all other extensions are built-in postgres contrib extensions.

Monitor related extensions are installed in monitor schema, which is created by pg_default_schemas.

`pg_reload`

reload postgres after hba changes, default value is true

This is useful when you want to check before applying HBA changes, set it to false to disable reload.

`pg_default_hba_rules`

postgres default host-based authentication rules, array of hba rule object.

default value provides a fair enough security level for common scenarios, check PGSQL Authentication for details.

pg_default_hba_rules:             # postgres default host-based authentication rules
  - {user: '${dbsu}'    ,db: all         ,addr: local     ,auth: ident ,title: 'dbsu access via local os user ident'  }
  - {user: '${dbsu}'    ,db: replication ,addr: local     ,auth: ident ,title: 'dbsu replication from local os ident' }
  - {user: '${repl}'    ,db: replication ,addr: localhost ,auth: pwd   ,title: 'replicator replication from localhost'}
  - {user: '${repl}'    ,db: replication ,addr: intra     ,auth: pwd   ,title: 'replicator replication from intranet' }
  - {user: '${repl}'    ,db: postgres    ,addr: intra     ,auth: pwd   ,title: 'replicator postgres db from intranet' }
  - {user: '${monitor}' ,db: all         ,addr: localhost ,auth: pwd   ,title: 'monitor from localhost with password' }
  - {user: '${monitor}' ,db: all         ,addr: infra     ,auth: pwd   ,title: 'monitor from infra host with password'}
  - {user: '${admin}'   ,db: all         ,addr: infra     ,auth: ssl   ,title: 'admin @ infra nodes with pwd & ssl'   }
  - {user: '${admin}'   ,db: all         ,addr: world     ,auth: ssl   ,title: 'admin @ everywhere with ssl & pwd'    }
  - {user: '+dbrole_readonly',db: all    ,addr: localhost ,auth: pwd   ,title: 'pgbouncer read/write via local socket'}
  - {user: '+dbrole_readonly',db: all    ,addr: intra     ,auth: pwd   ,title: 'read/write biz user via password'     }
  - {user: '+dbrole_offline' ,db: all    ,addr: intra     ,auth: pwd   ,title: 'allow etl offline tasks from intranet'}

`pgb_default_hba_rules`

pgbouncer default host-based authentication rules, array or hba rule object.

default value provides a fair enough security level for common scenarios, check PGSQL Authentication for details.

pgb_default_hba_rules:            # pgbouncer default host-based authentication rules
  - {user: '${dbsu}'    ,db: pgbouncer   ,addr: local     ,auth: peer  ,title: 'dbsu local admin access with os ident'}
  - {user: 'all'        ,db: all         ,addr: localhost ,auth: pwd   ,title: 'allow all user local access with pwd' }
  - {user: '${monitor}' ,db: pgbouncer   ,addr: intra     ,auth: pwd   ,title: 'monitor access via intranet with pwd' }
  - {user: '${monitor}' ,db: all         ,addr: world     ,auth: deny  ,title: 'reject all other monitor access addr' }
  - {user: '${admin}'   ,db: all         ,addr: intra     ,auth: pwd   ,title: 'admin access via intranet with pwd'   }
  - {user: '${admin}'   ,db: all         ,addr: world     ,auth: deny  ,title: 'reject all other admin access addr'   }
  - {user: 'all'        ,db: all         ,addr: intra     ,auth: pwd   ,title: 'allow all user intra access with pwd' }

`PG_BACKUP`

This section defines variables for pgBackRest, which is used for PGSQL PITR (Point-In-Time-Recovery).

Check PGSQL Backup & PITR for details.

pgbackrest_enabled: true          # enable pgbackrest on pgsql host?
pgbackrest_clean: true            # remove pg backup data during init?
pgbackrest_log_dir: /pg/log/pgbackrest # pgbackrest log dir, `/pg/log/pgbackrest` by default
pgbackrest_method: local          # pgbackrest repo method: local,minio,[user-defined...]
pgbackrest_repo:                  # pgbackrest repo: https://pgbackrest.org/configuration.html#section-repository
  local:                          # default pgbackrest repo with local posix fs
    path: /pg/backup              # local backup directory, `/pg/backup` by default
    retention_full_type: count    # retention full backups by count
    retention_full: 2             # keep 2, at most 3 full backup when using local fs repo
  minio:                          # optional minio repo for pgbackrest
    type: s3                      # minio is s3-compatible, so s3 is used
    s3_endpoint: sss.pigsty       # minio endpoint domain name, `sss.pigsty` by default
    s3_region: us-east-1          # minio region, us-east-1 by default, useless for minio
    s3_bucket: pgsql              # minio bucket name, `pgsql` by default
    s3_key: pgbackrest            # minio user access key for pgbackrest
    s3_key_secret: S3User.Backup  # minio user secret key for pgbackrest
    s3_uri_style: path            # use path style uri for minio rather than host style
    path: /pgbackrest             # minio backup path, default is `/pgbackrest`
    storage_port: 9000            # minio port, 9000 by default
    storage_ca_file: /etc/pki/ca.crt  # minio ca file path, `/etc/pki/ca.crt` by default
    bundle: y                     # bundle small files into a single file
    cipher_type: aes-256-cbc      # enable AES encryption for remote backup repo
    cipher_pass: pgBackRest       # AES encryption password, default is 'pgBackRest'
    retention_full_type: time     # retention full backup by time on minio repo
    retention_full: 14            # keep full backup for last 14 days

`pgbackrest_enabled`

enable pgBackRest on pgsql host? default value is true

`pgbackrest_clean`

remove pg backup data during init? default value is true

`pgbackrest_log_dir`

pgBackRest log dir, /pg/log/pgbackrest by default, which is referenced by promtail the logging agent.

`pgbackrest_method`

pgBackRest repo method: local, minio, or other user-defined methods, local by default

This parameter is used to determine which repo to use for pgBackRest, all available repo methods are defined in pgbackrest_repo.

Pigsty will use local backup repo by default, which will create a backup repo on primary instance’s /pg/backup directory. The underlying storage is specified by pg_fs_bkup.

`pgbackrest_repo`

pgBackRest repo document: https://pgbackrest.org/configuration.html#section-repository

default value includes two repo methods: local and minio, which are defined as follows:

pgbackrest_repo:                  # pgbackrest repo: https://pgbackrest.org/configuration.html#section-repository
  local:                          # default pgbackrest repo with local posix fs
    path: /pg/backup              # local backup directory, `/pg/backup` by default
    retention_full_type: count    # retention full backups by count
    retention_full: 2             # keep 2, at most 3 full backup when using local fs repo
  minio:                          # optional minio repo for pgbackrest
    type: s3                      # minio is s3-compatible, so s3 is used
    s3_endpoint: sss.pigsty       # minio endpoint domain name, `sss.pigsty` by default
    s3_region: us-east-1          # minio region, us-east-1 by default, useless for minio
    s3_bucket: pgsql              # minio bucket name, `pgsql` by default
    s3_key: pgbackrest            # minio user access key for pgbackrest
    s3_key_secret: S3User.Backup  # minio user secret key for pgbackrest
    s3_uri_style: path            # use path style uri for minio rather than host style
    path: /pgbackrest             # minio backup path, default is `/pgbackrest`
    storage_port: 9000            # minio port, 9000 by default
    storage_ca_file: /etc/pki/ca.crt  # minio ca file path, `/etc/pki/ca.crt` by default
    bundle: y                     # bundle small files into a single file
    cipher_type: aes-256-cbc      # enable AES encryption for remote backup repo
    cipher_pass: pgBackRest       # AES encryption password, default is 'pgBackRest'
    retention_full_type: time     # retention full backup by time on minio repo
    retention_full: 14            # keep full backup for last 14 days

`PG_SERVICE`

This section is about exposing PostgreSQL service to outside world: including:

Exposing different PostgreSQL services on different ports with haproxy
Bind an optional L2 VIP to the primary instance with vip-manager
Register cluster/instance DNS records with to dnsmasq on infra nodes

pg_weight: 100          #INSTANCE # relative load balance weight in service, 100 by default, 0-255
pg_default_service_dest: pgbouncer # default service destination if svc.dest='default'
pg_default_services:              # postgres default service definitions
  - { name: primary ,port: 5433 ,dest: default  ,check: /primary   ,selector: "[]" }
  - { name: replica ,port: 5434 ,dest: default  ,check: /read-only ,selector: "[]" , backup: "[? pg_role == `primary` || pg_role == `offline` ]" }
  - { name: default ,port: 5436 ,dest: postgres ,check: /primary   ,selector: "[]" }
  - { name: offline ,port: 5438 ,dest: postgres ,check: /replica   ,selector: "[? pg_role == `offline` || pg_offline_query ]" , backup: "[? pg_role == `replica` && !pg_offline_query]"}
pg_vip_enabled: false             # enable a l2 vip for pgsql primary? false by default
pg_vip_address: 127.0.0.1/24      # vip address in `<ipv4>/<mask>` format, require if vip is enabled
pg_vip_interface: eth0            # vip network interface to listen, eth0 by default
pg_dns_suffix: ''                 # pgsql dns suffix, '' by default
pg_dns_target: auto               # auto, primary, vip, none, or ad hoc ip

`pg_weight`

relative load balance weight in service, 100 by default, 0-255

default values: 100. you have to define it at instance vars, and reload-service to take effect.

`pg_service_provider`

dedicate haproxy node group name, or empty string for local nodes by default.

If specified, PostgreSQL Services will be registered to the dedicated haproxy node group instead of this pgsql cluster nodes.

Do remember to allocate unique ports on dedicate haproxy nodes for each service!

For example, if we define following parameters on 3-node pg-test cluster:

pg_service_provider: infra       # use load balancer on group `infra`
pg_default_services:             # alloc port 10001 and 10002 for pg-test primary/replica service  
  - { name: primary ,port: 10001 ,dest: postgres  ,check: /primary   ,selector: "[]" }
  - { name: replica ,port: 10002 ,dest: postgres  ,check: /read-only ,selector: "[]" , backup: "[? pg_role == `primary` || pg_role == `offline` ]" }

`pg_default_service_dest`

When defining a service, if svc.dest=‘default’, this parameter will be used as the default value.

default values: pgbouncer, means 5433 primary service and 5434 replica service will route traffic to pgbouncer by default.

If you don’t want to use pgbouncer, set it to postgres instead. traffic will be route to postgres directly.

`pg_default_services`

postgres default service definitions

default value is four default services definition, which is explained in PGSQL Service

pg_default_services:               # postgres default service definitions
  - { name: primary ,port: 5433 ,dest: default  ,check: /primary   ,selector: "[]" }
  - { name: replica ,port: 5434 ,dest: default  ,check: /read-only ,selector: "[]" , backup: "[? pg_role == `primary` || pg_role == `offline` ]" }
  - { name: default ,port: 5436 ,dest: postgres ,check: /primary   ,selector: "[]" }
  - { name: offline ,port: 5438 ,dest: postgres ,check: /replica   ,selector: "[? pg_role == `offline` || pg_offline_query ]" , backup: "[? pg_role == `replica` && !pg_offline_query]"}

`pg_vip_enabled`

enable a l2 vip for pgsql primary?

default value is false, means no L2 VIP is created for this cluster.

L2 VIP can only be used in same L2 network, which may incurs extra restrictions on your network topology.

`pg_vip_address`

vip address in <ipv4>/<mask> format, if vip is enabled, this parameter is required.

default values: 127.0.0.1/24. This value is consist of two parts: ipv4 and mask, separated by /.

`pg_vip_interface`

vip network interface to listen, eth0 by default.

It should be the same primary intranet interface of your node, which is the IP address you used in the inventory file.

If your node have different interface, you can override it on instance vars:

pg-test:
    hosts:
        10.10.10.11: {pg_seq: 1, pg_role: replica ,pg_vip_interface: eth0 }
        10.10.10.12: {pg_seq: 2, pg_role: primary ,pg_vip_interface: eth1 }
        10.10.10.13: {pg_seq: 3, pg_role: replica ,pg_vip_interface: eth2 }
    vars:
        pg_vip_enabled: true          # enable L2 VIP for this cluster, bind to primary instance by default
        pg_vip_address: 10.10.10.3/24 # the L2 network CIDR: 10.10.10.0/24, the vip address: 10.10.10.3
        # pg_vip_interface: eth1      # if your node have non-uniform interface, you can define it here

`pg_dns_suffix`

pgsql dns suffix, ’’ by default, cluster DNS name is defined as {{ pg_cluster }}{{ pg_dns_suffix }}

For example, if you set pg_dns_suffix to .db.vip.company.tld for cluster pg-test, then the cluster DNS name will be pg-test.db.vip.company.tld

`pg_dns_target`

Could be: auto, primary, vip, none, or an ad hoc ip address, which will be the target IP address of cluster DNS record.

default values: auto , which will bind to pg_vip_address if pg_vip_enabled, or fallback to cluster primary instance ip address.

vip: bind to pg_vip_address
primary: resolve to cluster primary instance ip address
auto: resolve to pg_vip_address if pg_vip_enabled, or fallback to cluster primary instance ip address.
none: do not bind to any ip address
<ipv4>: bind to the given IP address

`PG_EXPORTER`

pg_exporter_enabled: true              # enable pg_exporter on pgsql hosts?
pg_exporter_config: pg_exporter.yml    # pg_exporter configuration file name
pg_exporter_cache_ttls: '1,10,60,300'  # pg_exporter collector ttl stage in seconds, '1,10,60,300' by default
pg_exporter_port: 9630                 # pg_exporter listen port, 9630 by default
pg_exporter_params: 'sslmode=disable'  # extra url parameters for pg_exporter dsn
pg_exporter_url: ''                    # overwrite auto-generate pg dsn if specified
pg_exporter_auto_discovery: true       # enable auto database discovery? enabled by default
pg_exporter_exclude_database: 'template0,template1,postgres' # csv of database that WILL NOT be monitored during auto-discovery
pg_exporter_include_database: ''       # csv of database that WILL BE monitored during auto-discovery
pg_exporter_connect_timeout: 200       # pg_exporter connect timeout in ms, 200 by default
pg_exporter_options: ''                # overwrite extra options for pg_exporter
pgbouncer_exporter_enabled: true       # enable pgbouncer_exporter on pgsql hosts?
pgbouncer_exporter_port: 9631          # pgbouncer_exporter listen port, 9631 by default
pgbouncer_exporter_url: ''             # overwrite auto-generate pgbouncer dsn if specified
pgbouncer_exporter_options: ''         # overwrite extra options for pgbouncer_exporter

`pg_exporter_enabled`

enable pg_exporter on pgsql hosts?

default value is true, if you don’t want to install pg_exporter, set it to false.

`pg_exporter_config`

pg_exporter configuration file name, used by pg_exporter & pgbouncer_exporter

default values: pg_exporter.yml, if you want to use a custom configuration file, you can specify its relative path here.

Your config file should be placed in files/<filename>.yml. For example, if you want to monitor a remote PolarDB instance, you can use the sample config: files/polar_exporter.yml.

`pg_exporter_cache_ttls`

pg_exporter collector ttl stage in seconds, ‘1,10,60,300’ by default

default values: 1,10,60,300, which will use 1s, 10s, 60s, 300s for different metric collectors.

ttl_fast: "{{ pg_exporter_cache_ttls.split(',')[0]|int }}"         # critical queries
ttl_norm: "{{ pg_exporter_cache_ttls.split(',')[1]|int }}"         # common queries
ttl_slow: "{{ pg_exporter_cache_ttls.split(',')[2]|int }}"         # slow queries (e.g table size)
ttl_slowest: "{{ pg_exporter_cache_ttls.split(',')[3]|int }}"      # ver slow queries (e.g bloat)

`pg_exporter_port`

pg_exporter listen port, 9630 by default

`pg_exporter_params`

extra url parameters for pg_exporter dsn

default values: sslmode=disable, which will disable SSL for monitoring connection (since it’s local unix socket by default)

`pg_exporter_url`

overwrite auto-generate pg dsn if specified

default value is empty string, If specified, it will be used as the pg_exporter dsn instead of constructing from other parameters:

This could be useful if you want to monitor a remote pgsql instance, or you want to use a different user/password for monitoring.

'postgres://{{ pg_monitor_username }}:{{ pg_monitor_password }}@{{ pg_host }}:{{ pg_port }}/postgres{% if pg_exporter_params != '' %}?{{ pg_exporter_params }}{% endif %}'

`pg_exporter_auto_discovery`

enable auto database discovery? enabled by default

default value is true, which will auto-discover all databases on the postgres server and spawn a new pg_exporter connection for each database.

`pg_exporter_exclude_database`

csv of database that WILL NOT be monitored during auto-discovery

default values: template0,template1,postgres, which will be excluded for database auto discovery.

`pg_exporter_include_database`

csv of database that WILL BE monitored during auto-discovery

default value is empty string. If this value is set, only the databases in this list will be monitored during auto discovery.

`pg_exporter_connect_timeout`

pg_exporter connect timeout in ms, 200 by default

default values: 200ms , which is enough for most cases.

If your remote pgsql server is in another continent, you may want to increase this value to avoid connection timeout.

`pg_exporter_options`

overwrite extra options for pg_exporter

default value is empty string, which will fall back the following default options:

--log.level=info

If you want to customize logging options or other pg_exporter options, you can set it here.

`pgbouncer_exporter_enabled`

enable pgbouncer_exporter on pgsql hosts?

default value is true, which will enable pg_exporter for pgbouncer connection pooler.

`pgbouncer_exporter_port`

pgbouncer_exporter listen port, 9631 by default

default values: 9631

`pgbouncer_exporter_url`

overwrite auto-generate pgbouncer dsn if specified

default value is empty string, If specified, it will be used as the pgbouncer_exporter dsn instead of constructing from other parameters:

'postgres://{{ pg_monitor_username }}:{{ pg_monitor_password }}@:{{ pgbouncer_port }}/pgbouncer?host={{ pg_localhost }}&sslmode=disable'

This could be useful if you want to monitor a remote pgbouncer instance, or you want to use a different user/password for monitoring.

`pgbouncer_exporter_options`

overwrite extra options for pgbouncer_exporter, default value is empty string.

--log.level=info

default value is empty string, which will fall back the following default options:

If you want to customize logging options or other pgbouncer_exporter options, you can set it here.

Feedback

Was this page helpful?

Glad to hear it! Please tell us how we can improve.

Sorry to hear that. Please tell us how we can improve.

Last modified 2024-05-04: add en version of prepare (b963021)